Door Handle End Cap WB07K10043

the first end cap broke when I tried to tighten the screws, the end cap holes were too small, Thirty some dollars down the drain. Drilled out the second end cap before I tighten the screws, worked fine. Make sure you drill out the holes of the end caps or they will split out and you lose your money. There are no warnings about this problem.

Removed torx head screws. Removed broken pieces of the end caps. Replaced the handle installed the end cap screws.

Simple replacement of the handle...1 plastic part and 1 screw...tighten and done.....perfect fitting part...Do not over tighten.

The parts were shipped quickly and were what I ordered. The one suggestion I would make to the installer would be to drill out the insert holes a bit in the plastic columns in the inside of the bracket. There are two such columns and they are used to provide further strength to the end cap. However, the diameter of the screw is too large for the insert hole because as I installed the first bracket one of these columns broke. After drilling out the insert hole, the screws were still snug and the end cap (and door handle) was quite solid.

the difficult part of the job was getting the door open.once the door was opened , replaceing the defective hinge was not that hard.i received the replacement hinge in one day which was great.

We were really happy with how quickly the parts we ordered were delivered to us. Replacing the endcaps was quick and easy.

I removed the 3 screws from the Door Handle End Cap that was broken and replaced it with the (easily ordered and quickly delivered) New End Cap.
The job was quick easy and we barely remember the door handle at all.

After several temporary fixes, one of the end caps finally broke completely, so the handle fell off. Ordered both caps, they arrived remarkably fast, and were installed easily.