This metallic vent hood filter collects grease particles in the air from cooking. This part is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Microwave.
This part works with the following products:
General Electric.
Part# WB06X10288 replaces these:
AP3417082, 910437, WB06X10288, WB6X10288
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
JOSE
February 17, 2018
The measurements for my filter are: 4.3/4" by 13". The filter that shows for this model is 6"x13" ....??? may i get the correct size? thank you!
For model number JVM1870SF02
Hello Jose, Thank you for your inquiry. We showing that this part# WB06X10288 is actually approximately 4 1/2 inches by 13 inches. Hope this helps!
18 people found this helpful.
Was this helpful?
Thank you for voting!
Karen Sack
September 10, 2017
I need to replace the grease filter but I want to make sure that the size is correct. What are the dimensions of the one pictured on the internet?Thanks,k.
For model number JVM1870SK04
Hi Karen,
Thank you for the question, This filter Measures about 13-1/2 inches wide by 6 inches deep.
Good luck with the repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Donna Granese
October 13, 2017
Would changing the grease filter actually fix the keypad from not responding?
For model number PVM2070SM4SS
Hi Donna,
Thank you for your inquiry. You are better off checking the fuse, the door switch, the touchpad and the electronic control board. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Harriet
September 5, 2019
Looking for microwave grease filter GE part # wb06x10596, dimensions approx 6"x13 1/4"
For model number JVM6175DF1WW
Good day Harriet. Thank you for your question in regards to your unit (Model Number JVM6175DF1WW). Based on our research, you can find this part by searching PartSelect Number PS952418 on our website www.PartSelect.com. Hope this helps. Best Regards.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Diane
January 7, 2020
Is this part under the range hood above the cooktop? Approximately are its measurements 12.5” x 5”?
For model number JVM1871SHO3
Hello Diane, Thank you for the question. This Filter is s actually approximately 4 1/2 inches by 13 inches. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ida
August 12, 2019
I need replacement filters for my GE spacesaver 2.0 microwave. I measured the existing ones and they measure 12”lx4”w which part # do i need to order?
Hello Ida, thank you for inquiring. We would be happy to look into this, but we will need the specific model number for your microwave to do so. We look forward to hearing back from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 7 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dirty filter - replacement filter installed
Manually with no tools
Laura from Sugar Grove, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
537 of 612 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
turntable made a loud noise
First I unscrewed the screws that were holding the panel underneath. Then I removed the panel and removed the screws that held the turntable motor in place. Then replaced the old motor with the new and screwed everything back into place.
Removed two screws then took off decorative panel. Put hinges on and attached springs, mounting decorative panel onto the grille. placed back in unit and replaced two screws, viola!
Inserted new greese filters by unscrewing fan and light holder over range. The new filters were 1/4 inch shorter than older filters and are loser than the original filters, but they will work. Not sure if I inserted them correctly, and would like to see instructions on how to insert filters of that type. Thank you for your fast and curtious service.
D. Lynette from Ogden, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
76 of 142 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
getting to the charcoal filter
Follow directions in the manuel, but getting the grill off to get to the where the filter goes was very difficult, the springs kept poping around. Finally got together. This is the 2nd time I have replaced this grill, don't remember it being this difficult before.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
