Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
James A - October 24, 2021
Verified Purchase
Fast Repair
This part fit perfectly. Thanks, Was worried we were going to have to buy a new stove.
★★★★★
★★★★★
Cynthia T - October 28, 2020
Verified Purchase
Easy repair -worked as expected- fast delivery
Plugged right in-appliance back working
★★★★★
★★★★★
Georgia B - November 6, 2018
Verified Purchase
Easy Repair
The part was exactly what I wanted and needed. It fit perfect. Thank you for the prompt shipment.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 4 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
I had to replace surface elements and "burner bowls" or drip bowls
I pulled out the old parts, dropped the burner bowl into place, then plugged the prongs of the surface element into their sprocket. It took about ten seconds and used no tools.
Replaced the old element with the new part with a problem.
Ralph from Hendersonville, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
0 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The ceramic contact housing for the burner had melted, and the back large burner started to burn.
I verified the parts that were sent to me to make sure they were what I needed. I read the instructions for the replacement of the new parts. I then moved the stove out away from the wall to access the back plate where the burner connections are located. I removed the cover plate to expose the connections. I then traced out the wires from
... Read more the burner that needed to be replaced to the connections on the back panel. I disconnected the appropriate wires and tied them off on both ends because it was difficult to try and weave the old wires out and the new wires through the original channel they were running through. I removed the damaged ceramic housing and installed the new ceramic housing along with the new large burner ring. I then routed the new wires through the stove to the back connection panel and plugged them into the same positions as the old wires occupied. I then wrapped up the excess cable and tied it off and stored it inside the rear panel per the instructions. I tie wrapped the new cable along the route of the existing channel of wires from the front to the rear and then replced the back panel and secured it with the screws. I pushed the stove back to it's original position. I then tuned on the rear burner to see if was working properly, and it heated up fine.
Removed the old element and burner bowls and replaced them with the new ones! No screws, no tools needed. PartSelect's prices are cheaper than any other place on the Internet and they shipped me genuine replacement parts, not some 3rd party no-name brand. Also, shipping took less than 2 days! I am thoroughly impressed.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Amy
June 21, 2019
I need the burner light for my stove which number do I need to order and also the light that goes in it
For model number JBS07M2BB
Hello Amy, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS237433 for the indicator light and PartSelect Number PS1020380 for the red lens. Hope this helps!
I need to replace my 6” and 8” burners on my Kenmore range. Your description does not give measurements. Mine actually measure 9 3/4” and 7 3/4”. Can you verify that these will fit?
For model number 91195492300
Hello Yana, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS243924 for the Small Element and Part #: PS226491 for the Large Element. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
