Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennis
July 5, 2021
Does this come with the spring and clip?
Hello Dennis, Thank you for the question. The Spring and lip come included with the Igniter. We hope this helps!
Was this helpful?
Thank you for voting!
John
13 days ago
Is there a video showing how to replace this exact igniter?
For model number GE gas cooktop model zgu375LS igniter module
Hello John, thank you for reaching out. We have found some relevant instructions to replace the igniter. These instructions may not be of the same exact model, but will help you with the process. Remove the burner caps and burner head assemblies. Remove the burner ring locking nut. Then remove the orifice tube from the center of the burner base. Lift the burner base and disconnect the wire terminal from the spark electrode. Remove the clip to remove the igniter. Follow the same steps backward to install the new igniter. Glad to be of help!
Was this helpful?
Thank you for voting!
John
3 days ago
Thank you for directions to remove and install this igniter.......however, you did not mention the spring ??
For model number ZGU375LSD2SS
Hello John, thank you for reaching out. You may need to insert the spring into the igniter and hold the spring by attaching the clip. We have attached a link to the image which will help you in attaching the spring and the clip. We hope this information helps!
