Part Location Diagram of MHIK7989 Whirlpool Complete Ice Maker Kit
See part 712 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Complete Ice Maker Kit MHIK7989

 Fits your IK1ANS!

Rated by 5 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 329.35
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your IK1ANS!
PartSelect Number PS2164775
Manufacturer Part Number MHIK7989
Manufactured by Whirlpool
Product Description

Complete Ice Maker Kit Specifications

This kit comes with ducts, a water fill tube, and the hardware needed to install the icemaker. It replaces the old twist-tray style of icemaker.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Refrigerator, Ice Maker.
This part works with the following products:
Admiral, Magic Chef, Maytag, Jenn-Air.
Part# MHIK7989 replaces these:
AP4323291, 1203, 047195-01, 1-16310, 116310, 52304-1, 52305-1, 52305-3, 52305-6, 52305-8, 53105-1, 53105-2, 53105-37, 53105-47, 53105-7, 62577-1, 62577-11, 62577-13, 62577-4, 62577-5 , 62577-6, 62577-7, 65277-6, 65638-1, 69452302, 69452310, 69452329, 69452337, 69463673, B11-894, B11-895, B81-429, M-10-154, M-10-33, M-10-79, MHIK7989, RA43714-1, RA43714-10, RA43714-12, RA43714-14, RA43714-2, RA43714-4, RA43714-6, RA43714-8, RA43714-9, RA95019-1, RA95020-1, RIM655, Y04719501 Show less
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.2 / 5.0, 5 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Motor burned out
removed all three screws, disconnected power. then I switched out the plug assembly (mine had different male adapter. Then the Control Arm, new arm was to wide and took up to much space when it was fully extended. Put it back in reverse order, and within 5 hours it was making ice.
  • Earl from San Antonio, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old ice maker was leaking water when it filled freezing the ice in the accumulation tray into one big lump.
First, I read the instructions that came with the replacement ice maker, which I found confusing because they were apparently written to be installed in some other make of refrigerator. However, after removing the white plastic cover on the new unit and insuring that it was identical to the one that came with the refrigerator, I removed the old unit by first, removing the bottom screw that held the unit to the side of the refrigerator. Then, I loosened the two top mounting screws. slid the unit up and pulled out and away from the side of the refrigerator. Then, holding the unit in my left hand, I pinched the two plastic tongs on either side of the wiring harness where it attached to the outlet at the back of the refrigerator, took the ice maker out of the freezer compartment and set it aside. Then I located the water regulator screw on the right side of the new ice maker and turned it one complete turn clockwise to reduce the amount of water that would fill the unit. After reinstalling the white plastic cover on the new ice maker, I saw that the wiring harness that came with it would not fit my refrigerator's outlet. So I removed the wiring harness from the old ice maker and installed it on the new one. Then I connected it to the outlet at the back of the refrigerator, slid the ice maker over the two top mounting screws and then pulled down to seat the screws. Next, I used a small torpedo level to level the ice maker both vertically and horizontally. This required placing several flat washers behind the metal mounting bracket at the bottom of the ice maker and the refrigerator wall. Once I had leveled the new ice maker, I tightened all three screws and shut replaced the ice receiver tray. Works fine.
  • Robert from Franklin, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The coating in the ice maker was peeling and ice not ejecting properly. The water would over flow over to the ice tray and freez.
Remove the 3 screws and disconect the plug. The wiring harnes on the new Ice Make did not match so I use the wiring harness from my old unit. I pluged the new one in and screwed in the three screws and it was ready. I did have to wait a full 24 hours before the first 8 pieces of ice eject out.
  • Patricia from Buena Park, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No ice was made
Removed power, removed the ice maker being held with three screws. Replaced with old unit. This box was so old that I robbed parts from the old and placed them on the new unit. Mkes ice very good.
  • Gene from Highland Village, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
5 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced The Ice Maker.
Very slowly, had no clue what I was doing. Instructions were great, and even I got the job done.
  • john from prescott, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers
5 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
October 21, 2017
Where can i get a replacement bail wire for my ice maker?
For model number 10653854300
PartSelect logo
Hi David, Thank you for your question. I have linked the part information for the bail wire down below for you. Good luck with your repair.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2164775
Manufacturer Part Number: MHIK7989
Brand
Model Number
Description
Admiral
17774-OA
Refrigerator - REFRIGERATOR
Admiral
17774-OB
Refrigerator - REFRIGERATOR
Admiral
17774-OC
Refrigerator - REFRIGERATOR
Admiral
17774-OD
Refrigerator - REFRIGERATOR
Admiral
17774-OE
Refrigerator - REFRIGERATOR
Admiral
17774A
Refrigerator - REFRIGERATOR
Admiral
17774B
Refrigerator - REFRIGERATOR
Admiral
19274A
Refrigerator - REFRIGERATOR
Admiral
19282A
Refrigerator - REFRIGERATOR
Admiral
19282B
Refrigerator - REFRIGERATOR
Admiral
19284A
Refrigerator - REFRIGERATOR
Admiral
19284B
Refrigerator - REFRIGERATOR
Admiral
19364A
Refrigerator - REFRIGERATOR
Admiral
19384A
Refrigerator - REFRIGERATOR
Admiral
19384B
Refrigerator - REFRIGERATOR
Admiral
19494A
Refrigerator - REFRIGERATOR
Admiral
19494B
Refrigerator - REFRIGERATOR
Admiral
19572A
Refrigerator - REFRIGERATOR
Admiral
19574A
Refrigerator - REFRIGERATOR
Admiral
19574B
Refrigerator - REFRIGERATOR
Admiral
19574C
Refrigerator - REFRIGERATOR
Admiral
19574D
Refrigerator - REFRIGERATOR
Admiral
19584A
Refrigerator - REFRIGERATOR
Admiral
19584B
Refrigerator - REFRIGERATOR
Admiral
19864A
Refrigerator - REFRIGERATOR
Admiral
19864B
Refrigerator - REFRIGERATOR
Admiral
19874A
Refrigerator - REFRIGERATOR
Admiral
19874B
Refrigerator - REFRIGERATOR
Admiral
19874C
Refrigerator - REFRIGERATOR
Admiral
19884A
Refrigerator - REFRIGERATOR
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service