This door catch kit is designed for use in dryers. This is an authentic OEM replacement part. This catch assembly ensures the door of your appliance will close, and remain closed. It allows your appliance to both start and complete a full drying cycle. There are two pieces included in this kit, one catch, and one strike. You open and close the door on such a regular basis that this mechanism can wear out. It is a fairly common part to replace. You will need to remove the door of your dryer to install the replacement catch assembly.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Rhoda H - March 22, 2023
Verified Purchase
Dryer door latch
It was the correct part and easy to install
★★★★★
★★★★★
Ken B - May 1, 2021
Verified Purchase
Worked as I expected
It worked perfectly. Would have been nice if I had known there was a duplicate one one the hinge side I could have had it up and running a week earlier
★★★★★
★★★★★
Herb W - April 7, 2021
Verified Purchase
part
was great and easy to install
★★★★★
★★★★★
Robert J - November 18, 2020
Verified Purchase
Easy to repair when you get the right parts which I did.
Dryer is working again. Fair price and quick delivery.
★★★★★
★★★★★
PAUL P - October 27, 2020
Verified Purchase
Easy repair.
Installation was easy, didn't need the male metal clip, existing plastic one works fine.
★★★★★
★★★★★
Kris W - September 6, 2020
Verified Purchase
Perfect fit
Perfect fit. Easy installation
★★★★★
★★★★★
Danielle B - May 14, 2020
Verified Purchase
Easy Repair
Ordering and shipping was easy and accurate. The part was exactly what I needed. I fixed my dryer door in less than 30 minutes.
★★★★★
★★★★★
Ana C - August 3, 2019
Verified Purchase
It fit perfectly
The part was exactly as it was described. It made machine new again.
★★★★★
★★★★★
Mike C - June 25, 2019
Verified Purchase
easy part to install
just as described
★★★★★
★★★★★
Glen J - September 13, 2018
Verified Purchase
easy repair
worked perfectly
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 25 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
dryer door would not stay closed.
I unscrewed the door catch and pried out with some resistance the strike part. Screwed in the catch and pushed in the strike. Closed door. Voila!! Back in business with assurance.
maria from ROCHESTER, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Catch
Watch the video. Very, very easy
James from LARAMIE, WY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door catch would not latch
Well tried to find this simple part around Columbus and even maytag website no luck.Parts select had it to go and arrived earlier than expected.Fixed it less than 5 minutes works great.taken longer to put the light bulb back in,Really like the accuracy and quick response from parts select.If I had called a service tech probably would have
... Read more cost $50.00 or more for a part that cost a little over $3.00 and saved this site in case I need to order other parts.Thank you
Read less
Sidney from hilliard, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The female catch in door was bro9ken
I took out the old worn out part and replaced with the one I order.
JOSEPH from ANSONIA, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Install new latch
Just snapped the new plastic latch into the hole (the hole was there because in trying to extract the old latch, it fell into the inside of the door). Took two seconds. Order to arrival of the part took only 22 hours!
Russell from Alexandria, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken door clip
After watching the great install video, I followed his lead and within 20 min had my dryer door fixed. This dryer was bought in 1986 and I really thought I was looking at buying a new dryer. How wonderful that I could fix it for less than $11. Easy to find web site, easy to find part, great instructions and fast delivery!
Lynette from Rock Island, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer door would not close
discovered it was a broken latch. Ordered the latch, only took 2 days to arrive and all I had to do was remove the broken latch and snap in the new one. I saved myself a service call. I'm very happy!!!!!!
Priscilla from Portland, ME
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace door closer
Removed power and front panel, removed broken latch, pushed in new latch and replaced the front panel and power. Done
Erwin from Somersworth, NH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set, Wrench set
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My 11 year old daughter broke the door clasp
My 11 year old daughter broke the door clasp to the dryer by repeatedly slamming it trying to get it to close. I told her to go down stairs write down the make model and serial number and come back up and find a place to buy it online. I left with instructions not to use the computer for anything else until the part was found. Less then 1
... Read more5 minutes later I came back because I heard giggling. She was chatting but had found an exploded view of the door and the part. She was very pleased with herself! We bought it and it arrived a few days later. I saw the empty box. She had opened it and taken it down and installed it herself. A good lesson, for her and me
Read less
Kent from Ladue, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would not stay shut
Took off the four screws to get to the female clip and used pliers to squeeze it out. Next was using pliers to pinch out the male connector and place the new one in.
Eli from North Stonongton, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jack
November 25, 2017
Looking for dryer latch kit for Speed Queen dryer he5003w
For model number HE5003W
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS2162263. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Stuart
May 13, 2019
Does this part fit this model or do you know the part number that does?
For model number 20E107
Hello Stuart, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sylvia
October 28, 2019
Maytag bravos, above model, serial # mw3006680. Broken female part of latch located in dryer door. What would be the part number please?
For model number MED6400TQ0
Hello Sylvia, thank you for inquiring. That would be the Door Catch, part number PS11748369 for your model dryer. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mike
November 7, 2019
How to remove door strike and install door strike
For model number MDE9206AYW
Hi Mike, please watch our video here https://www.youtube.com/watch?v=i-9zZhKY02o. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
KEN
February 25, 2020
Dryer stops mid cycle. Press start button once and dryer completes cycle. Sometimes when i press start button dryer hums. If i turn the timer knob a little and then press start button it completes the cycle.
For model number LDE7334ACE
Hello and thank you for writing.
It certainly sounds like it could be a faulty door catch PS2162263 and door switch PS1964648 you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. Also, you should make sure your timer itself PS11757529 is not loose with its connections. We hope this helps. Please contact us anytime if you require further assistance.
