Part Location Diagram of D7824706Q Whirlpool Replacement Ice Maker
See part 1 in the diagram
Replacing your Amana Refrigerator Replacement Ice Maker
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Replacement Ice Maker D7824706Q

 Fits your 24912-0A!
★★★★★
★★★★★
154 Reviews

Rated by 272 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

22% OFF
$ 89.89 $ 115.96
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 24912-0A!
PartSelect Number PS2121513
Manufacturer Part Number D7824706Q
Manufactured by Whirlpool for Amana, Maytag, Admiral, Kenmore
Product Description

Replacement Ice Maker Specifications

This ice maker (Ice Maker Assembly, Refrigerator Ice Maker) produces ice cubes that are ejected into the storage bucket. It is located in the freezer section of your appliance, mounted on the freezer wall. The ice maker can break from normal wear and accidental damage. If this happens, your refrigerator may no longer make ice cubes, or may not make enough cubes, and the part should be replaced. This model measures approximately 11 inches long and 5 inches wide. It’s constructed of plastic and metal, and comes in black/white/silver. This assembly includes the ice mold and the control device.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos
Difficulty: Easy | Tools Required: Nutdriver,Screw drivers
Repair Tip: Before you start this repair, shut off the water supply and unplug your appliance. Once you have installed your new ice maker it can take up to 24 hours for it to begin producing ice.

Replacing your Amana Refrigerator Replacement Ice Maker

Replacing your Amana Refrigerator Replacement Ice Maker

How to Troubleshoot a Refrigerator That Doesn't Make Ice

How to Troubleshoot a Refrigerator That Doesn't Make Ice

How Does an Ice Maker Work?

How Does an Ice Maker Work?

How to Troubleshoot an Ice Maker That is Not Working

How to Troubleshoot an Ice Maker That is Not Working

Test If Your Electrical Part is Failing - Multimeter Tool

Test If Your Electrical Part is Failing - Multimeter Tool
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Leaking | Ice maker won’t dispense ice | Ice maker dispenses too little ice
This part works with the following products:
Refrigerator, Ice Maker.
Part# D7824706Q replaces these:
AP4135008, 915772, D7824706Q, 0056504, 0056599, 0056605, 0056606, 0311155, 0312578, 0312738, 0312739, 0312740, 10549201, 10563707, 10563708, 14211407, 61005508, 61005508A, 67001263, 68111-1 , 68972-1, 68972-4, 8170937, 95091-1, 95098-1, 95109-1, D7767601, D7824701, D7824702, D7824703, D7824704, D7824705, D7824705Q, D7824706, D7824706Q, D7824706QVP, R0154025, R0156628, R0156629, R0156669, R0161059, R0161061, R0167201, R0183135, R0194462, R0194462A, R0194666, R0950064, W10122519, W10190978, Y0056504, Y0056599, Y0056606, Y0312578, Y0312738, Y0312740, Y689724, YR0161061 Show less
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
154 Reviews
4.7
Filter By Rating:
  • 5 Stars
    132
  • 4 Stars
    14
  • 3 Stars
    2
  • 2 Stars
    0
  • 1 Star
    6
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.0 / 5.0, 272 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Ice Maker was overflowing with water
I could not determine if the solenoid water inlet valve or the ice maker unit was bad, so I replaced both.
In this model of the refrigerator, the freezer is a drawer on the bottom, so this makes access to the ice maker mounting a little tricky. The need to contort to reach into the back made this take longer and was more uncomfortable than expected. I needed to completely remove the screws for the top brackets, even though most instructions indicate you can loosen these and lift the ice maker off. Be careful to properly re-seat the water guide that directs the water from the inlet tube to the ice maker. That tended to interfere with re-connecting the wiring harness to the back of the freezer. Again, this was likely difficult because of having to bend over into the freezer.
The ice maker needs to be in the freezer for about 12 hours before the sensor in the black wire is cool enough to allow operation. I did not know this at first, so I was initially worried that there was a bigger problem. If you want to use the test functions with a jumper wire, be sure the door switch that controls the freezer light is depressed.
The solenoid value replacement was fairly straightforward. I found it useful to use a small open wrench to push the compression lock for the value-to-ice maker water tube to remove the old solenoid. Otherwise, replacing the water valve was simple.
Other Parts Used:
Refrigerator Single Water Inlet Valve Replacement Ice Maker
  • William from W LAFAYETTE, IN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Wrench set
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker dripped water into ice bin, freeezing into large block of ice,
turn off water and unplug fridge. remove ice maker bottom mounting screw. just loosen the 2 top mounting screws. unplug wire harness from back of fridge. remove old icemaker from freezer compartment. once removed, salvage square endcover and reinstall on new maker. unfasten wire harness from old maker and reinsatll on new one. reinsert thermal wire in new ice maker holding bracket. remove second wiring bracket and reinstall on new maker to hold remaining wires (not mentioned on "how to-" video). remove old ice maker on/off bale and reinstall on new one. remount new maker to top mounting screws, reinsert harness plug into fridge. replace bottom screw,
  • charles from PHOENIX, AZ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Icemaker made some pretty sad cubes! Hollow, unfilled, or small cubes
Replacing the icemaker is pretty simple. Three screws, an electrical connector. Hardest part is getting to the icemaker since the freezer is below the refrigerator.
  • Dana from ABINGTON, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leak
The repair was fairly simple other than the tray replacement where the yoke passed through. Tray was broken all around the auger motor and the yoke had to be removed in order to install in new tray. Used a vise with light pressure to hold the motor, applied some heat with a mini torch to the threads of the yoke, used a screw driver a and small hammer to quickly tap yoke to loosen.
Other Parts Used:
Yoke Guide Replacement Ice Maker Yoke Assembly
  • Robert from HENRICO, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice tray was corroded and leaking
Removed top drawer from freezer. Unplugged the ice maker. Uncrewed the bottom screw. Loosened the two top screws. Removed old ice maker. Removed all the parts that didn't come with the new ice maker and installed on new ice maker. Reinstalled the new ice maker. Started making ice with no leaks in about 3 hours.
  • Scott from SAN DIEGO, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped making ice
Remove 1 screw under ice maker. Gently pull downwards to unhook ice maker. Disconnected 4 pin wire connector. Remove and set aside the cover and wire loop you will need on new ice maker. Reverse the steps to install new maker. Once new ice maker is installed you will have to wait 2-4 hours for ice. There is a thermostat that will need to reach 10 degrees F to operate.
  • Daniel from DAVISBURG, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice tray filled up with water. Stopped making ice.
As per instructions. Removed parts from old ice maker, and installed them on new one, Then installed it in the freezer. Works good.
  • robert from COLDSPRING, TX
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking water every time ice maker fillls.
Replaced entire ice maker. Turn off water where it comes out of the wall. Loosen two top screws and remove one screw at bottom. Lift unit up and off top screws and swivel out to the right and disconnect power plug from freezer. Warning new unit does not come with: 1. Power Cable 2. Front plastic cover. 3. Wire bail. Install in reverse order Do NOT toss old unit until new one is installed and working. My came with the bottom mounting bracket bent so I just used the old one. When installing old power cable into new unit be sure to put small sensor into clip. It's part of the cable harness assembly.
  • Bill from Granite Bay, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced leaking ice maker after minor screwup!
Old ice maker leaking water and produced ice cubes with black inclusions. First, I removed old ice maker per video instructions. Transferred electrical cable, cover, and bail to new ice maker. First installation failed because I failed to make sure water tube correctly enter back of ice maker. No ice. Initially thought electrical cable wasn't firmly in place. Then I noticed frozen water dripping down back of freezer. A clue! Removed ice maker and reinstalled making sure water tube went through the hole in back of ice maker. Now the new ice maker works beautifully!
  • Jackson from Leesburg, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
not making ice
the diagnosis was the most difficult step.. and trusting that the one visible nut was the only thing holding it on.. (there are 2 other clips that you need to use a little force on to detach). remove the ice maker (one nut, 2 clips, detach plug).. then remove the 3 screws holding on the 'face' , pry face off, you will see where the 'contact' has burned/melted/worn away. replace unit. 80% of the time, this is the problem (according to my research)
  • Joseph from MILFORD, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

107 questions answered by our experts.
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pam
July 20, 2017
The cube sizes coming out of my icemaker in the fridge are not a good size. Is the icemaker adjustable in the sense that I can pick the size of the cubes or at least make them smaller. If so where is it/how do I do it?
PartSelect logo
Hi Pam, great question! On the right side of your assembly there should be a small, white, plastic screw. Using this, you should be able to adjust the size of the cubes. I hope this helps.

66 people found this helpful.

Was this helpful?
Thank you for voting!
Vanessa
October 5, 2017
The water on our ice maker isnt shutting off and runs water into the ice bucket eventually creating a huge block of ice. We replaced the water inlet valve but it's still doing the same thing.
PartSelect logo
Hi Vanessa, Thank you for your question. Unfortunately that probably means that your ice maker itself is malfunctioning and will need to be replaced. Good luck with your repair.

58 people found this helpful.

Was this helpful?
Thank you for voting!
Victoria
August 25, 2017
The ice maker is not making ice... there doesn't seem to be any water coming to ice maker. there water dispenser in the refrigerator portion is working properly. thank you
For model number JFC2087HRS
PartSelect logo
Hi Victoria, Thank you for your question. I would suggest testing your water inlet valve. The valve has two solenoids, one for your water inlet valve and one for your ice maker. It could be that the solenoid for your ice maker might be malfunctioning. You can test your part with a multi-meter. This test is fairly simple, all you have to do is set you multi-meter to the lowest setting. The calibrate it until the needle is on zero. You will then take each prob to the terminals inside of the plugs for each of your water inlet valve's solenoids. If the solenoid is reading 500 - 1500 ohms, then your valve is fine. However if your reading is close to or stays on zero, you will have to replace your valve. Also check your fill tube as well, it could be that there is an ice build up in the tube and it is blocking water from getting to your ice maker. I hope this helps you. Good luck with your repair.

38 people found this helpful.

Was this helpful?
Thank you for voting!
Jasper
July 20, 2017
My freezer is making weird noises and I fear its coming from the ice maker and that I have to replace it. Im not very handy but I don’t want to spend money on this part and a repair person. How hard is replacing it and do you think I need to replace it? It sounds like a tapping or clicking… not a normal freezer sound.
PartSelect logo
Hello Jasper, unfortunately if your icemaker is making a clicking sound, that is a sign that it needs replacing. You can order that here D7824706Q. As for the installation process, it is not a difficult repair. You will need to remove a few screws, unplug the wires to the assembly, and attach the new one. Please let us know if you have any further questions!

26 people found this helpful.

Was this helpful?
Thank you for voting!
Rick
October 25, 2017
The ice maker in the freezer section of my Jenn-Air (your website says manufacturer part number d7824706q- the data plate inside the fridge says part number uki2500axx) ) is leaking water into the ice pan. The ice maker works, it makes ice, the bail works but i am getting a block of ice forming in the ice pan every few days. I looked under the ice mold when water was running in from fill cup and it appears that water is leaking along the front edge of the mold and i suspect the ice maker needs to be replaced (it's 13 years old.) also, i am finding a glaze of ice on the floor of the freezer and, occasionally (once or twice a week), a small puddle of water on the floor under the fridge. It appears to me that water is working its way down through the freezer from the ice maker because i' have found ice on top of food items on the shelves as well. The ice maker looks like it would be easy to replace based on internet research and your website. I am wondering about the occasional puddle of water on the floor and whether the water inlet valve should also be replaced or if the water from inside the freezer is working it's way to the outside. Based on your opinion I'll order parts to replace the ice maker. Thanks.
For model number JCB2389GRS (Rev. 13)
PartSelect logo
Hi Rick, Thank you for the question. When the ice maker is leaking it can cause the puddle you are getting. I suggest replacing the ice maker first as it will need to be replaced to fix the block of ice in the ice cube pan and see if that fixes the issue. You can also remove the backing from the appliance and take a rag, wrap it around the valve and check it after 24 hours to see if it is wet. Hope this helps!

17 people found this helpful.

Was this helpful?
Thank you for voting!
Vincent
November 15, 2017
Why is my ice maker leaking ? I took it out ,its not cracked and sometimes it stopped leaking for a bit then started leaking again.
For model number ABB2524DEB
PartSelect logo
Hi Vincent, Thank you for your question. I would suggest figuring out where your leaking is coming from first. If it is coming from below the ice maker tray, then it is likely you will need to replace your ice maker. However if the leaking is happening because the tray is being over filled with water, you should test your water inlet valve with a multi meter to see if it is working correctly. It could be that the solenoid for your ice maker has failed. If your valve is fine, you will need to replace your ice maker. I hope that helps. Good luck with your repair.

15 people found this helpful.

Was this helpful?
Thank you for voting!
Lucy
July 20, 2017
My icemaker is over flowing and running right out of the freezer door. I feel like the water is not shutting off properly and the tray is over flowing which is causing the running water. Does this sound right? If so, what’s the most likely culprit?
PartSelect logo
Hi Lucy, we recommend checking your water valve 12001414 for damage. A faulty water valve is most likely the cause in this case. Best of luck with this repair!

15 people found this helpful.

Was this helpful?
Thank you for voting!
Gary
October 23, 2017
I recently replaced the water inlet valve and I still have no water going to the ice maker. Do I need to replace the ice maker?
PartSelect logo
Hi Gary, Thank you for the question. If the valve did not fix the issue then the icemaker is not telling the valve when it send water to fill the icemaker. To fix this the icemaker will need to be replaced. Good luck with the repair!

15 people found this helpful.

Was this helpful?
Thank you for voting!
Marge
November 3, 2017
We installed the new ice maker and it’s not filling with water. Does it take awhile for it to cycle and fill. I know everything else was working except the ice maker before
PartSelect logo
Hi Marge, Thank you for your inquiry. Once a new ice maker is installed, it can take up to 24 hours for the ice maker to start making ice. I hope this helps. Thank you and have a great day!

12 people found this helpful.

Was this helpful?
Thank you for voting!
Kim
October 12, 2017
When the ice cubes from my automatic ice maker melt, they release small white flakes of flocculant material that settles to the bottom of the glass. The cartridge water filter is only 4 months old, and the 'replace filter' light is not illuminated. The water coming from the chilled water dispenser does not have the white flakes. Does the water for the ice maker go through the cartridge filter? Any idea what the problem/source might be for the flakes in the ice cubes? Thanks. \km
For model number JBR2088HES (JennAir refrigerator)
PartSelect logo
Hi Kim, Thank you for your inquiry. The white flakes that are appearing in your ice are caused by calcium carbonate and magnesium carbonate which are found in hard water. Calcium carbonate and magnesium carbonate are harmless, but if you want perfect, flake-free ice cubes, you will need to soften your water. I hope this helps. Thank you and have a great day!

11 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2121513
Manufacturer Part Number: D7824706Q
Brand
Model Number
Description
Kenmore
10672002010
Refrigerator
Kenmore
10672003010
Refrigerator - REFRIGERATOR
Kenmore
10672003011
Refrigerator - REFRIGERATOR
Kenmore
10672009010
Refrigerator - REFRIGERATOR
Kenmore
10672012010
Refrigerator
Kenmore
10672013010
Refrigerator
Kenmore
10672019010
Refrigerator
Maytag
12001294
Ice Maker
Maytag
12001302
Ice Maker
Admiral
12500048
Ice Maker - Freestanding
Maytag
17694
Refrigerator - REFRIGERATOR
Admiral
17794A
Refrigerator - REFRIGERATOR
Admiral
18103-0
Refrigerator - REFRIGERATOR
Admiral
18103-0A
Refrigerator - REFRIGERATOR
Admiral
181040
Refrigerator - REFRIGERATOR
Amana
18914A
Refrigerator - AMANA REFRIGERATOR
Admiral
19123-0
Refrigerator - REFRIGERATOR
Admiral
19124-0
Refrigerator - REFRIGERATOR
Admiral
19133-0A
Refrigerator - REFRIGERATOR
Admiral
191340
Refrigerator - REFRIGERATOR
Admiral
191347
Refrigerator - REFRIGERATOR
Admiral
19143-0A
Refrigerator - REFRIGERATOR
Admiral
19143-0B
Refrigerator - REFRIGERATOR
Admiral
191450
Refrigerator - REFRIGERATOR
Admiral
191457
Refrigerator - REFRIGERATOR
Admiral
19153-1
Refrigerator - REFRIGERATOR
Admiral
191550
Refrigerator - REFRIGERATOR
Admiral
191557
Refrigerator - REFRIGERATOR
Admiral
19163-0A
Refrigerator - REFRIGERATOR
Admiral
191650
Refrigerator - REFRIGERATOR
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service