Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The oven door didn't shut all the way
Clearly, the oven gasket was not the cause of the problem. The hinge replacements did not fix the problem. I think the problem was that the hinge's mating part inside the door had been deformed, perhaps by leaning on the door when fully opened. I compensated for that by placing two stacked magnets near the upper hinge mounting scre
... Read morew hole on the inside of the oven body. (0.75" screws , 8-24 or metric equiv., needed for the upper screw location.) This gave the hinge about 15 degrees of additional door tilting force. In addition, I added 6 ceramic magnets across the top of the door mating surface, kudos to that website. Now it pulls fully flush with the magnets. Ceramic magnets are good to 400+ degrees and they come in boxes of 120 for $12.00. I only had one oven as a sample, but I could see what I thought was deformation on the inside of the oven door where the hinges are inserted. In this case, I think that makes (only) hinge replacement futile. Sorry if this solution does not fit your marketing desire, but I did leave the new hinges installed.
Read less
Barrett from MERCER ISLAND, WA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
8 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patrice
October 16, 2017
I would like to order new door hinges, do they come in a set of 2?
For model number JDS9860CDS02
Hi Patrice, Thank you for the question. These hinges are sold Individually and you will need to order 2 hinges. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
September 26, 2023
The oven door does not close completely. When I looked at the door it appears as though the left hinge does not “flex” as the right one does. Could the possible solution be to replace the left hinge?
For model number JDS8850BDS
Hello Mark, thank you for getting in touch. Based on the description that you have provided, we would recommend replacing the door hinge, part number PS2088772, to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Bob
October 2, 2017
Hello. I need to replace the hinges on this gas range. Do you stock them? If so what's the part number and i order them right away. Thanks.
For model number JGS9900CDB
Hi bob,
Thank you for your repair. These would be the correct hinges for your appliance. You can order them online or by contacting customer service. Good luck with your repair.
Was this helpful?
Thank you for voting!
Jim
March 26, 2018
How do i adjust door hinge/spring to make door close tightly?
For model number JES9800CAB01
Hi Jim,
Thank you for your question. Unfortunately we do not have any installation information on this part. You cannot really adjust the hinge, you would only be able to remove it and reinstall it. If your door is not closing as tightly as it used to be you might have to replace the hinge because the spring might just be wearing down. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Beth G
March 17, 2020
How do i replace this hinge on my, can't seem to find instructions? It's a Jenn-Air jgs8850bdw. Thanks.
For model number JGS8850BDW
Hello Beth, thank you for your inquiry. Unfortunately we do not have any installation information on this part. We suggest reaching out to the manufacturer directly for further assistance with your inquiry. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
