2087906-1-M-Whirlpool-74010546-Door Hinge - Left or Right Side

( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Door Hinge - Left or Right Side

★★★★★

3 Reviews

Rated by 9 customers

Easy

15 - 30 mins

Ratings submitted by customers like you who bought this part.

$ 56.25

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS2087906

Manufacturer Part Number 74010546

Manufactured by Whirlpool

Product Description
Troubleshooting
Questions and Answers
Customer Repair Stories
Customer Reviews
Model Cross Reference

Product Description
Troubleshooting
Questions and Answers
Customer Repair Stories
Customer Reviews
Model Cross Reference

Product Description

Door Hinge - Left or Right Side Specifications

This door hinge can be used for the left or right side. As per the manufacturer if the hinges have never been replaced on the appliance, they suggest to replace the door hinge receptacle kit.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Door won’t close

This part works with the following products:

Range.

This part works with the following products:

Maytag, Amana, KitchenAid, Jenn-Air.

Part# 74010546 replaces these:

AP4101089, 1073304, 7106P124-60, 74008743, 74010546

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

3 questions answered by our experts.

< Prev
1
Next >

Sort by:

Robert

November 8, 2017

Got the door off can not get it back on

For model number AER5715QAW

Hi Robert, Thank you for your question. You should be able to slide your door back on to the hinges. We did have a customer who wrote in with some instructions that may help you: " I had a lot of trouble unlocking the door hindge you must pull the door out to change the hinge they are on the hinge and slide foward then pull the door up and out lay the door flat on a table cover the table with a towel so you don't scrach either one. Unscrew 6 screws on the door cover. 3 on top 3 on bottom take the cover off the hinges are exposed there 3 screws on the hinge 1 on the front and 2 on the bottom replace hinges install face insert door and lock the hinge it's all done. " I hope that helps. Good luck with your repair.

3 people found this helpful.

Was this helpful?

Thank you for voting!

E T

December 18, 2017

The springs on this oven door produce loud "stretching" noise when the door is opened or closed, especially when hot. Do i need to replace them is there some way to quiet them ? I found the hinge/spring assembly # 74010546. Is the spring availablr alone or must i replace the entire assembly ? Thanks, eti

For model number MERH 752BAN

Hi E T, Thank you for your question. If your door hinges are making a loud noise when you open the door, especially when it is hot, you will need to replace them. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?

Thank you for voting!

Lenny

November 8, 2019

Oven door does not close tight

For model number MER5755QAW

hello Lenny, Thank you for the question. I suggest checking the Door Hinges PartSelect Number PS2087906 and the Hinge Receptacle PartSelect Number PS11744396 for wear or damage. Hope this helps!

Was this helpful?

Thank you for voting!

Related Parts:

Hinge Receptacle

$14.41

< Prev
1
Next >

Customer Repair Stories

Average Repair Rating: 3.8 / 5.0, 9 reviews. What's this?

< Prev
1
Next >

Sort by:

Oven door was not closing all the way

First I released the lock on the oven door hinge so that I could take the door off by lifting it up and out. Then it was just a matter of removing screws, replacing the hinges, and putting it back together. I did have to guess a little as I started removing screws as I wasn't sure exactly what to remove, but it became pretty self evident as I looked it over. Not as bad as I had expected.

Odin from Warrensburg, MO
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

15 of 29 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

I leaned on the door and broke the hindge

I had a lot of trouble unlocking the door hindge you must pull the door out to change the hinge they are on the hinge and slide foward then pull the door up and out lay the door flat on a table cover the table with a towel so you don't scrach either one. Unscrew 6 screws on the door cover. 3 on top 3 on bottom take the cover off the hinges are exposed there 3 screws on the hinge 1 on the front and 2 on the bottom replace hinges install face insert door and lock the hinge it's all done. I wish I had these directions

Norman from Brockton, MA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

13 of 22 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Door won't close properly

Removed and replace the old spring and it close properly again.

Other Parts Used:

Lock Hoop Door Assembly

Joseph from San Jose, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

8 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

replaced faulty door hinge and installed tip-over bracket to floor

removed door (no tools required - just lift and pull door out of range). removed front door panel with a screwdriver. removed/replaced door hinge with nutdriver. replaced front door panel with screwdriver. replaced door on range (again, no tools required). then installed tip-over bracket to floor/wall behind range. measured location, drilled pilot holes and installed wood screws into the floor and rear wall stud.

Other Parts Used:

Anti-Tip Bracket

Rodney from Knoxville, TN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set

6 of 20 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

the oven door would not shut all the way, so heat was leaking

The part fit perfectly.Ther repair was logic. The door was of course heavy . I needed an extra hand.
I would have appreciated of instructions were included with the part. Also a web link on how to do it would alos have helped greatly

mohaemd from pittsburgh, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

4 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

My wife dropped a cast iron dish on the door while it was open, bent the hinges, so it would not close properly.

It was really easy, just lift the door off from the range, I set it down on the box that the hinges came in, took the six screws out to release the front fascia of the door from the back, hinges are right there, un-screw and install the new hinges, put everything back together in reverse and lift the door back on to the range, less than 10 minutes!

Barry from Barre, VT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The door was stepped on and did not open or close correctly

I took the door off, removed the inside of the oven door and replaced the three screws for each hinge. I replaced the inside of the oven door and put the door back on and everything worked GREAT.

Other Parts Used:

Valve Knob

Andrew from Mableton, GA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

3 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven door hinges would secure door tightly

Removed door from oven. Removed 6 screws to dismantle door. Removed 3 more screws to remove hinge from door...reverse order to assemble.
Very easy

Jeff from Syracuse, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Oven door would not close tightly

Remove door
Remove front cover of door
Remove hinge screws
Put back together.

Allen from PISGAH FOREST, NC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

< Prev
1
Next >

Customer Reviews

Average Rating:

★★★★★

3 Reviews

3.7

Filter By Rating:

5 Stars

2
4 Stars

0
3 Stars

0
2 Stars

0
1 Star

1

< Prev
1
Next >

Sort by:

★★★★★

Verified Purchase

Exact part, mint condition-cavalier about delivery

Great part - ordered wee AM hrs day before Thanksgiving, paid top dollar for priority delivery, but didn't touch the part for shipping until after Thanksgiving, not cool.

★★★★★

Verified Purchase

Jenn-Air oven door hinges

The parts were packaged differently but were a perfect fit. I recommend viewing tutorials on You Tube. What they did not mention in the tutorial is that the screws that hold the door together (top and bottom) must be removed in order to remove/install the part; but this is common when you look at the door assembly. The parts installed in minutes and the oven is like new again.

★★★★★

Verified Purchase

Failed

Repair seemed to go well but hinges failed after second use. Locked up and couldn’t disengage. Needed to replace oven.

January 22, 2019

Hello, Thank you for leaving a review on the part ordered. I have sent you an email in regards to the order. Hope to hear from you!

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

PartSelect Number: PS2087906
Manufacturer Part Number: 74010546

Kenmore

10658039802

Refrigerator

Amana

AER5515QAQ