Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
August 4, 2021
Hi just ordered and installed a new long heat sensor for my Maytag wall oven, hoping that was my problem. The part arrived on time thanks! However, it didn't fix the problem. Ihere's the deal: I set my temp at 350, it beeps when it reaches the assigned temp, but continues to go up to about 385. Then, it comes back to about 355 360, then stays there for a bit, then goes back up to 380 390, then back to about 375. Etc etc etc.So.... do i need a new thermostat?
For model number MEW6530DDS
Hi Richard,
Thank you for your question. If you have just replaced the sensor and the oven is still not heating correctly, there are some other parts that you will need to check to see which one is causing the issue. You will need to check the high limit thermostat, the electronic control board and the wire connections between the electronic control board and the sensor. We hope this helps! Good luck with the repair!
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
