X-Large Burner Head with Electrode 74007736 | Official Whirlpool Part | Fast Shipping | PartSelect
X-Large Burner Head with Electrode – Part Number: 74007736
( Grid squares measure 1x1 inch )
X-Large Burner Head with Electrode – Part Number: 74007736 X-Large Burner Head with Electrode – Part Number: 74007736 X-Large Burner Head with Electrode – Part Number: 74007736 https://partselectcom.azureedge.net/Schematics/Maytag/59565.gif

X-Large Burner Head with Electrode

PartSelect Number PS2085280

Manufacturer Part Number 74007736

Manufactured by Whirlpool

Product Description

X-Large Burner Head with Electrode Specifications

This is the burner head and electrode for your gas range. If your gas igniter glows but will not light, or if the element will not start or heat entirely, you may need to replace the burner head. This burner head is approximately 4¼ inches in diameter and is sold individually. Please note that the mounting screws for this burner head are sold separately. To replace the burner head, simply unscrew the old, defective burner head and screw in the new one.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Gas igniter glows, but will not light | Will Not Start | Element will not heat

This part works with the following products:

Cooktop, Range.

This part works with the following brands:

Jenn-Air, KitchenAid, Maytag.

Part # 74007736 replaces these:

1009484, 74007736, 74007736, 7505P306-60, AP4098508.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
8 questions answered by our experts.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 9 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Joe from Saratoga Springs, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
74007736, 74007735, 74007734
electrode would not lite burner
Unscrewed burner head and replaced with new burnerhead and electrode. Just like new. Parts cost 128.00 including shipping. Very simple repair. Saved 200.00 in labor. Parts came within 36 hours. Super Fast.
21 of 26 people found this instruction helpful.
Was this instruction helpful to you?
bill from spokane valley, WA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Parts Used:
WP74010652, 74007736, WP7733P410-60, WP3368921
electrode clicked but failed to light burner
I first tried to remove the torx screws only to have them break off..soooo as with most home repairs it grew into a bigger task. 1) unhooked the gas line and unplugged the unit 2) place the unit upside down on workbench 3) used a socket set to remove the hex screws that held the top on 4)removed all the other burners and disconnected electrical wire connected to the igniters. 5) Removed the top 6) uses pliers to remove the screw parts left in the burner base (wd-40 and lock wrench)..Replaced the old gaskets 7) put the top back on and screwed the top back on (make sure you pull the igniter wires through the top before securing it) 8) Reseat and screw in the burners using a torx bit
8 of 11 people found this instruction helpful.
Was this instruction helpful to you?
calvin from Edmond, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP74009336, 74007736, WP8273062
electrode broke, screw broke
The ceramic on the electrode broke due to water over boiling the week of Thanksgiving. When i tried to loosen the screw to replace the electrode it broke off inside the threads. Ordered whole new unit overnight. Back in business in five minutes. Thanksgiving was back on!! Thanks!
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Gayle from COUPEVILLE, WA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WP400021-1, 74011652, 74007736
Replacing burning assemblies and rusted screws
Installing the 2 new burner assemblies worked great with the new screws. New screws however, did not work with the old burner assemblies that have rusted screws I wanted to replace. New burner assemblies are slightly taller that the old ones.
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
W E from Camden, NC
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
74007736
electrode sparked but not enough to lite burner
Unscrewed burner assembly and removed wire. Unable to remove electrode screw. Striped head of screw. Tried penetrating oil but no luck. Tried to drill and use easy out bit but ruined burner assembly and had to order new burner assembly. When assembly came it had electrode in place but website does not show electrode with assembly except on one burner. With mail and all it took about a week to fix 2 burners. Returned unused electrode for credit. Overall, cheaper then a service call by far.
4 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Mike from Big Canoe, GA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
74007736, WP3368921
Burner would not light
Replaced burner assembly.
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
jose from san juan bautista, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
74007736
erratic spark from electode,gas would no ignate.
Removed the two fastening screws with a small square head screwdriver,lifted the burner head disconnected wire from damaged electrode. To install just reversed the steps,total time less than ten minutes.
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Catherine from FAIRFAX STA, VA
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
WP90767, 74007736
Replace X-Large Burner Head with Electrode
Disassembly: Removed 2 screws with nutdriver. Pulled off electrode connection. Screws were rusted and needed replacement.

Assembly: Slipped on electrode attachment. Went to local hardware store and bought 5/8" 8/18 pan head screws. Used screwdriver to screw down burner head. The 3/8" inch screws on the tech sheet do not work. Too short and flange is too wide to fit in opening in burner head.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Mike from LIVINGSTON, NJ
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
74007736
burners would not light
This is the 3rd burner head that was replaced . everyone had the screws break off , & had to be drilled out & re tapped .I would not purchase the replacement screws @$4.00 each . They were just plain sheet metal screws that were steel . Better going to a home center & purchasing brass or stainless machine screws at a 1/4 of the cost .If you are not familiar with drilling out broken screws ,then this is not the repair for you .
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
8 Reviews
4.8
out of 5
Filter By Rating:
  • 5 Stars
    7
  • 4 Stars
    0
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS2085280
Manufacturer Part Number: 74007736
Brand
Model Number
Description
Jenn-Air
JDS8850BDB
Range
Jenn-Air
JDS8850BDS
Range
Jenn-Air
JDS8850BDS19
Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS8850BDW
Range
Jenn-Air
JDS8850BDW18
Range - 30" SLIDE-IN Dual Fuel Range
Jenn-Air
JDS8850CDB00
Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS8850CDB01
Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS8850CDR00
Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS8850CDS00
Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS8850CDS01
Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS8850CDS02
Range - 30" SLIDE-IN Dual Fuel Range
Jenn-Air
JDS8850CDW00
Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS8850CDW01
Range - 30" SLIDE-IN DUAL FUEL RANGE
Jenn-Air
JDS8860BDP
Range
Jenn-Air
JDS8860BDP16
Range - 30" GAS DUAL FUEL
Jenn-Air
JDS8860BDP17
Range - 30" DUAL FUEL GAS RANGE
Jenn-Air
JGC
Cooktop - JENNAIR COOKING
Jenn-Air
JGC8430BDB
Cooktop
Jenn-Air
JGC8430BDQ
Cooktop
Jenn-Air
JGC8430BDS
Cooktop
Jenn-Air
JGC8430BDW
Cooktop
Jenn-Air
JGC8536ADB
Cooktop
Jenn-Air
JGC8536ADQ
Cooktop
Jenn-Air
JGC8536ADS
Cooktop
Jenn-Air
JGC8536ADW
Cooktop
Jenn-Air
JGC8536BDB11
Cooktop - 36" GAS COOKTOP
Jenn-Air
JGC8536BDS11
Cooktop - 36" GAS COOKTOP
Jenn-Air
JGC8536BDW11
Cooktop - 36" GAS COOKTOP
Jenn-Air
JGC9430ADB
Cooktop
Jenn-Air
JGC9430ADF
Cooktop