Maytag/Maytag_Thumb/56395.gif
See part 11 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Upper Bake Element - 240V

★★★★★
★★★★★
22 Reviews

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your MER6755AAB Range!
 Fits your MER6755AAB Range!
PartSelect Number PS2082040
Manufacturer Part Number 74004105
Manufactured by Whirlpool
Product Description

Upper Bake Element - 240V Specifications

This bake element is found on the bottom of the oven.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Element will not heat | Little to no heat when baking | Oven not heating evenly
This part works with the following products:
Range.
This part works with the following products:
Maytag, Kenmore, Jenn-Air, Whirlpool.
Part# 74004105 replaces these:
AP4096820, 704161, 74004105, 7406P427-60, W10314702
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

6 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Dean
    December 10, 2017
    Serial number 20632778cp,series 20.Will part # 74004105 work on this series?
    For model number MER6872BAS
    Hello Dean, Thank you for the question. Yes this Bake Element will work on your appliance model and serial number. Good luck with the repair!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    STELLA
    June 28, 2019
    I have the Maytag double oven and i want to know is this part for the top bottom oven?
    For model number MER6555, MER6751,MER6755, MER6775,
    Hello Stella, thank you for writing. This Bake Element is for the upper oven. The Bake Element for the lower oven is part PS11744518.

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Rob
    March 18, 2020
    This looks like the part i need in the diagram but the description says it’s for the bottom oven i need the top element in the top oven, any advice would be greatly appreciated. I’ve ordered parts from you guys before and they were exactly what i needed and as described, i just want to double check before i order, Thanks, rob
    For model number MER6772BAW
    Hello, Thank you for your question. This is the part you are needing- Part #: PS2342087, this is the broil element for the upper oven. We hope this helps.

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Richard
    June 27, 2021
    The heating element on the upper oven is not working. When we set the upper oven to heat, the broil element comes on. ( broil element also comes on when we set to broil). Is replacing the heat element going to solve the problem?
    For model number MER6755AAW
    Hello Richard, Thank you for the question. Yes, if the Broil element is working properly but the Bake element is not we suggest replacing the Bake Element. Thank you for your inquiry, good luck with this repair!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Richard
    June 28, 2021
    When the bake button is pressed on the upper oven, is the broiler element activated along with the bake element during the pre-heat cycle?
    For model number MER6755AAW
    Hello Richard, Thank you for the question. During the Pre Heat the bake and broil element will come on until the temperature reaches the set temperature. We hope this helps!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Richard
    July 2, 2021
    I received and replaced the upper oven bake element. (ps2082040). The element still does not heat. I checked continuity on the old element and it appears to be ok. Could the problem lie in the control panel? Is there a way to reset the control panel to factory settings?
    For model number MER6755AAW
    Hi Richard, Thank you for your question. If you have replaced the baking element and it is still not heating, there may be an issue with the oven temperature sensor. This fixes the issue the majority of the time. You will need to test the sensor with a multimeter to see if it is working correctly. Set your multimeter to the Rx1 setting and touch the terminals with the probes. The reading you should receive varies between models, refer to your owner’s manual to determine how much resistance a functioning thermostat should have for your model. Additionally, refer to your wiring diagram to determine which set of contact(s) you should be testing. If the issue is not with the sensor, you will also need to check the electronic control board and the wiring between the parts to see which part is causing the issue. We hope this helps! Good luck with the repair!

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Customer Repair Stories
       Average Repair Rating: 3.6 / 5.0, 9 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        oven heating elements were burned out
        I unplugged the oven then, one element at a time, I removed the screws and pulled the connecter out of the sleeve. This was the hardest part as it is a tight fit. Then, reverse the order to replace the element. The upper elements were more work because of the brackets used to hold them in place. But this only took alittle more time to remove and replace each one. When I plugged the oven back in and turned it on everything worked great! Back to baking!
        Other Parts Used:
        Broil Element - 6 Pass Broil Element - Push On Terminals Lower Bake Element
        • Theresa from Belfair, WA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Screw drivers
        10 of 16 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Heating element did not heat
        I removed the two small screws, gently pulled the element outward, slid the wire connectors off the ends of the element legs and reversed the process to install the new one. THE ELEMENT STILL DOES NOT HEAT. There must be a bad switch or thermostat at the ON switch area. That will be checked out by a Repair man as soon as I can get a schedule from him.
        • Ernest from Live Oak, FL
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        9 of 10 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        The much used, upper oven heating element burned out and needed to be replaced.
        I pulled the range out, unplugged it and removed the back panel with a Phillips-head screwdriver. I then removed the two screws inside the oven that holds the element in place. I located the two wires on the back of the range attached to the element. I gently pulled off the wires using a pliers and then easily removed the burned out element. I put the ends of the replacement element into the respective holes, screwed them in and then plugged the wires back on at the back of the range. After replacing the back panel, I plugged the range back in. I turned the oven on with an oven thermometer inside, to test it out. I imagine I saved at least a couple of hundred dollars for the repair with this simple DIY, if not, the cost of a new double oven range!
        • Madelyn from BOCA RATON, FL
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Pliers, Screw drivers
        4 of 4 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        dual oven range, upper bake element melted
        Removed oven door and rack. Removed two screws holding element. Disconnected wires to element. One of the wires slipped into the back wall of the oven. The range had to be removed from the counter and back panel removed to gain access to the element wires. Install new bake element in upper oven. Connect wires to element spade lugs. Install rear panel. Restore power at circuit breaker panel. Very important - aways disconnect power before starting work.
        • JAMES from WAYNE, PA
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          More than 2 hours
        • Tools:
          Pliers, Screw drivers
        4 of 4 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Lower element in oven burned out
        When the element failed, it continued to glow nearly white-hot and slowly burned along a spiral path on the element. I figured this MUST be due to a voltage leak - the control was OFF on the range.

        I shut off the breaker, removed the two screws where the element goes through the back of the oven, pulled the element forward and pulled the wires off of the element. (Found it handy to twist the wire connectors outward to prevent the wires from slipping through the back of the oven.)

        A new element won't "fit" exactly but you can easily push it into position to get the screw holes to line up. Total time was less than 15 minutes.
        • Tom from Plainwell, MI
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Screw drivers
        4 of 6 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        The heating element was damaged by a fire extinguisher.
        First I unplugged the range from the wall outlet power source...VERY IMPORTANT!!! Then I unscrewed the 2 mounts in the back of the range that hold the heating element in place. I removed the old and installed the new one and reattached the 2 new mounts with the original screws and plugged the range back into the wall outlet. Other than the small and dark work space inside the small oven, it was super easy to do and probably saved us $175!
        • Cody from Medford, NJ
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Pliers, Screw drivers
        2 of 4 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        element burned out
        after removing the element as decribed, my husband replaced the new element with the screws removed and it worked like new, less than 10 minutes and we appreciated so much the element was received so quickly.
        • Bessie from Covington, TN
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Screw drivers
        2 of 5 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        element malfunction coating starting to deteriorate
        Turned power off at the breaker for the range--double check to be on the safe side ---pair of light rubber type gloves-- stool to sit my old butt down on and a Phillips screw driver--removed the top burner first this is accomplished by removing the screws on each end of the burner unit--now each end of the burner unit has an coupling which will pull apart--wiggle the connection side to side and pull--when you have the couplings apart you have to remove the top brace that this burner unit slides into you remove the old unit and remove the bottom unit the same way except it doesn't have a brace---it helps to have long arms, which I don't , it was a bit of a stretch--be careful---plus I have a very thankful wife!!!!
        Other Parts Used:
        Broil Element - Push On Terminals
        • Louis from Summit HIll, PA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers
        0 of 3 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Element showed signs of deterioration. Aleady replaced broiler so it was time fr the ake element.
        Couple of screw, couple of minutes. Simple R and R. Took longer to walk down and turn the breaker off ;)
        • Mitch from Pickerington, OH
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Screw drivers
        0 of 3 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          22 Reviews
          4.8
          Filter By Rating:
          • 5 Stars
            18
          • 4 Stars
            4
          • 3 Stars
            0
          • 2 Stars
            0
          • 1 Star
            0
          Sort by:
          Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS2082040
          Manufacturer Part Number: 74004105
          Brand
          Model Number
          Description
          Kenmore
          22-98002
          Range - Kenmore Range/Stove/Oven Model 22-.98002 (2298002, 22 98002) Parts
          Kenmore
          22-98009
          Range - Kenmore Range/Stove/Oven Model 22-.98009 (2298009, 22 98009) Parts
          Kenmore
          62260002600
          Range
          Kenmore
          62260003600
          Range
          Kenmore
          62260008600
          Range
          Kenmore
          62260009600
          Range
          Kenmore
          62960002600
          Range
          Kenmore
          62960002606
          Range
          Kenmore
          62960003600
          Range
          Kenmore
          62960008600
          Range
          Kenmore
          62960008606
          Range
          Kenmore
          62960009600
          Range
          Kenmore
          62960009606
          Range
          Kenmore
          66598002700
          Range
          Kenmore
          66598003700
          Range
          Kenmore
          66598009700
          Range
          Kenmore
          66598013700
          Range
          Kenmore
          66598019700
          Range
          Whirlpool
          GGE350LWB00
          Range - Freestanding, Electric 30"
          Whirlpool
          GGE350LWQ00
          Range - Freestanding, Electric 30"
          Whirlpool
          GGE350LWS00
          Range - Freestanding, Electric 30"
          Jenn-Air
          JDR8895AAB
          Range
          Jenn-Air
          JDR8895AAS
          Range
          Jenn-Air
          JDR8895AAW
          Range
          Jenn-Air
          JDR8895ACB
          Range
          Jenn-Air
          JDR8895ACS
          Range
          Jenn-Air
          JDR8895ACW
          Range
          Jenn-Air
          JDR8895BAB13
          Range - 30" DUEL FUEL RANGE
          Jenn-Air
          JDR8895BAS13
          Range - 30" DUEL FUEL RANGE
          Jenn-Air
          JDR8895BAW13
          Range - 30" DUEL FUEL RANGE

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service