Installation videos
2082000-1-M-Whirlpool-74004053-Top Burner Igniter
Maytag/Maytag_Thumb/50074.gif
See part 13 in the diagram
Replacing your Maytag Range Top Burner Igniter play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Top Burner Igniter

★★★★★
★★★★★
19 Reviews

Rated by 19 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 33.12   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS2082000
Manufacturer Part Number 74004053
Manufactured by Whirlpool
You May Also Need?
Burner Head
$143.82
$143.82
  In Stock
Product Description

Top Burner Igniter Specifications

This is a surface burner igniter, also known as a top burner ignitor and stove top spark electrode. It is used to generate the spark that lights the surface burner. If your stove will not start, element does not heat, or gas igniter glows but does not light, replacing the igniter can solve these issues. For this installation, you will need a Phillips screwdriver and needle nose pliers. First place the grate on top of the burner, then lift the burner and disconnect the wires. Next remove the two Phillips screws from the bottom of burner, pull igniter out of the burner and wiggle in the new one. Refer to the installation instructions provided by the manufacturer for more instructions.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Gas igniter glows | but will not light | Element will not heat
This part works with the following products:
Range, Cooktop.
This part works with the following products:
Maytag, Magic Chef, Jenn-Air, Amana.
Part# 74004053 replaces these:
AP4093621, 704111, 74004053, 74004053, 7432P100-60
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

17 questions answered by our experts.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roi
August 22, 2017
Installed top burner igniter and can't get spark .Other burner works fine .Could new part be defective any ideas
For model number jdg8130ads
Hello Roi, thank you for contacting us. The electrode only makes the spark, unless it was corroded it would not be defective. Its the part that sends the spark to the electrode. The part you would need is a spark module PS11744058 Hope this helps!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
MODULE- SP
$200.90

  No Longer Available
Roi
August 22, 2017
Electricity not going to one of the igniters.Are both on same circut or seperate do i need new prong electrode and wire
For model number jenn air gas cooktop
Hi Roi, Thank you for your inquiry. If your stove will not start, element does not heat, or gas igniter glows but does not light, replacing the igniter can solve these issues. For this installation, you will need a Phillips screwdriver and needle nose pliers. First place the grate on top of the burner, then lift the burner and disconnect the wires. Next remove the two Phillips screws from the bottom of burner, pull igniter out of the burner and wiggle in the new one. Refer to the installation instructions provided by the manufacturer for more instructions. I hope this helps. Thank you and have a great day!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Derrik
November 22, 2019
Our jenn air gas range has two burners that won't light. Do we need to replace both ignitors? They quit working at the same time? Or could there be another problem?
For model number JDS9860ACB
Hello Derrik, thank you for inquiring. You will need to replace the Spark Igniter Set, part number PS11744110 for your model range. Good luck with your repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Debby
December 12, 2019
One burner will not auto light but the burner behind it will. When i turn the dial to ignite there is no clicking sound.
For model number JGD8345ADB
Hi Debby, thank you for your question. There are a couple of parts to check in this case. First you should check your burner electrode. Then you should take a look at your igniter switches/harness. If those parts are fine then you may have to look into your spark module being the issue. We hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Patrick
February 7, 2020
No spark from burners on left side don't work but if I swap the burners from the right it works.
For model number JDS9860AAB
Hi Patrick. Try to clean out the igniters if this does not work than you will have to replace the igniter. Thank you for your question and good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Thomas
January 22, 2022
One burner ignites the other doesn't. Does that mean it is the top spark ignitor? This is a jenn-air where their are 2 burners in a tray
For model number jds9860aap
Hello Thomas, Thank you for your inquiry. We have researched the model number you have provided and if only one burner is igniting, the most likely parts are the burner spark igniter, and the spark module. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Shengli
November 11, 2019
I was cleaning up my stove (jenn air/Maytag jds9860acp) and somehow two burners on same side did now start afterwards. I thought the igniters were somehow damaged because of wet. Bought two new ones and installed. Still did not work. The igniter module is fine for sure because other two burners work just fine. What is the mysterious thing and how I can fix this problem. Thanks!
For model number JDS9860ACP
Hello Shengli, Thank you for the question. I suggest testing the Igniter Switch PartSelect Number PS11744350. These sit behind the knobs on the valve. Check the switch to see if it has continuity in the light position. Hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Switch Ignitor
$88.57

  In Stock
Shengli
November 11, 2019
Thank you for your reply. The igniter switch must be good because the good burners work at both left and right sides. I believe the voltage is there at the ignitor and the gap looks good as well. But just no sparks. Can you please advise? Thank you!
For model number JDS9860ACP
Hi Shengli, I could only recommend to replace the burner igniters on the non-working burners. Thank you for your question and good luck with your repair!

Was this helpful?
Thank you for voting!
Alexander
February 1, 2020
Need igniter and the gasket also as mine is deteriorated
For model number 31213wav
Hello and thank you for writing. The top burner ignitor with electrode PS2082000 is in the list of compatible parts for your model. We hope this helps. Please contact us anytime if you require further assistance. The gasket is no longer available it has been discontinued.

Was this helpful?
Thank you for voting!
Hazem
February 5, 2020
I replaced the top burner igniter but still did not spark
For model number MGR5752BDQ
Hello and thank you for writing. It certainly sounds like it could be a faulty spark module PS2086288 you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.

Was this helpful?
Thank you for voting!
Related Parts:
Spark Module
$141.53

  In Stock
Back to Top
Part Videos

Replacing your Maytag Range Top Burner Igniter

Replacing your Maytag Range Top Burner Igniter play video
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.8 / 5.0, 19 reviews. What's this?
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
gas burner ignitor failure
Lift out sealed burner assembly rear of stove first while careully sliding to rear to disengage ignitor probes.Remove philips head screws from bottom sheet metal housing to expose bottom of burners Remove gas tube assembly screws and move tube away carefully.Unplug wires from ignitor.Remove screws for ignitor .Remove ignitor, I noticed that rust and dirt had built up around burner to pan connection.I used my oil filter wrench to turn slightly the burner to remove it from the pan to clean.Reassembled in reverse order.
  • roy from East Providence, RI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
138 of 154 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas burner head on stove top rusted out producing blue flame where there shouldn't be
Removed stove top module and unscrewed the bottom panel. Burner head rotated out fairly easily. I ordered both the burner unit and the igniter just to be safe even though the old igniter still worked. I used the other module as a guide to reassemble the unit. The new burner head was little difficult to rotate back in and did not rotate quite as far as the original so the gas pipe was just a fraction out of alignment but there is some flex so it worked out OK when it was re-installed. Everything worked perfectly when I turned on the burner and there are no gas leaks and no blue flames where there shouldn't be!
Other Parts Used:
Burner Head
  • Joellen from Castro Valley, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
66 of 69 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
porcelan on igniter broken (2)
remove 2 screws that hold element in place, remove element, replace with new element, and replace screws , replaced burner assy on other
Other Parts Used:
Burner Head Cap with Spark Electrode
  • paul from mc neal, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
31 of 45 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner would not light; ignitor did not produce spark
Take a few screws off the back of the slide in burner module. Take off the back. Unscrew the ignitor screw, remove ignitor carefully, replace with the new ignitor, put the screw back in, put the back back on, try it out! Ours worked after a couple of tries - don't know if the ignitor had to "rev up" by several sparks or we just didn't have it properly installed at first. Anyway, very easy. Did it in my pajamas on a Saturday morning.
  • Candace L. from Woodinville, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
16 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burners were leaking gas, igniters didn't work
I had to use a pipe wrench to remove the burners. They were pretty stubborn to remove from the insert. Once this was done, I installed the ingniters into the underside of the burner, then installed the venturi tubes. After that, installing the burners only took simple placement and a quarter turn to lock them in. I adjusted the burner with a screwdriver and wrench as per the manuals instructions and that is all it took. I did a repair that cost me approx $150.00 to all 4 burners instead of buying two complete new burner inserts for $600.00 and it took less than 1 hour to do. I would do it again anytime.
Other Parts Used:
ORIFICE # Venturi Burner Tube Front Gas Tube
  • Mitch from San Jose, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable), Wrench set
14 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The burner igniter would not spark to light the burner.
I had to unscrew 4 screws on the burner unit and then 2 screws on each igniter. slip the olds out and the new ones in and then replace all the screws. And wa la they sparked and I was cooking again.
  • Margie from San Antonio, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
12 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner would not ignite
Even though the ceramic insulator looked new (white), it had become non-functional, replacement was simple, 2 phillips screws, reassemble and test. Now I will have to order the other 3.
  • Scott from Sacramento, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lack of burner gas ignition
I used the other good burner assembly to isolate the problem to the igniters or the igniter block. I ordered both parts from Parts Select. They shipped the parts promptly and after 10 minutes of install time, the burners worked flawlessly.
Thank You Parts Select.
  • Andrew from Lufkin, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced igniter in right rear burner
Simply remove the box containing the two right burners. Access the igniter by removing about 8 screws and pull the coupler for the igniter off with a pair of needel nose pliers. Replace with new igniter using the same tool. Re-assemble the box by screwing in the screws and give it a try. Worked great. Once slight hitch, be sure you don't leave a second screw driving in the box. As it will raddle. So I had to remove and reassemble twice. I'm not a surgeon! Thanks for the fast delivery!
  • Marty from Kennesaw, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
5 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Igniter insulation had cracked and spark was shorting out on the flame holder whatchmacallit.
The flame holder twists about 1/2 inch to left and lifts off. I removed the two screws that holds the igniter on and removed it and installed the new igniter.
There was one complication: when I put it back together, there was no spark. I removed the ground wire and cleaned and scraped it and replaced it and still no spark. But, for no apparent reason the spark returned and has been okay since.
  • Melvin from Santa Maria, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
19 Reviews
5.0
Filter By Rating:
  • 5 Stars
    19
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Andrew Y - October 16, 2022
  Verified Purchase
Easy to replace. Great service, and arrived quickly.
Perfect replacement.
★★★★★
★★★★★
Steve S - April 30, 2022
  Verified Purchase
??
??
★★★★★
★★★★★
Dorothy M - July 28, 2021
  Verified Purchase
Fairly easy install
Was glad to find a part for a 20 year old gas range. The video was not accurate for this installation but I figured it out.
★★★★★
★★★★★
John G - November 19, 2020
  Verified Purchase
Fixed Burner Ignition
Burner had no spark, purchased and replaced igniter, install easy and straight forward, 30 mins. Part matched perfectly.
★★★★★
★★★★★
BUD R - September 8, 2020
  Verified Purchase
It works!
Getting ready to sell an 18 yr old home with a Jennaire. One set of burners didn’t work so I replaced it with the bbq unit. A week later I took the unit apart and figured out igniters were bad. Got new ones, installed them and took unit back to home. It worked! Now I don’t feel guilty for a stove that wasn’t totally there.
★★★★★
★★★★★
Steve S - December 30, 2019
  Verified Purchase
easy repair, worked as expected
the part was in great condition and came fast. My stove is back to working order!
★★★★★
★★★★★
RICHARD M. W - April 26, 2019
  Verified Purchase
Worked perfectly
This was a factory part in a factory wrapper. Worked like it was made for it, because it was. Fast service, reasonable price too. Thanks guys.
★★★★★
★★★★★
Deborah E - March 5, 2019
  Verified Purchase
fast and easy repair
The part came quickly and the stove is working great.
★★★★★
★★★★★
Joe Z - January 17, 2019
  Verified Purchase
Easy Repair
This was a fairly easy installation - wish we had done it sooner!!
★★★★★
★★★★★
Raymond F - October 19, 2018
  Verified Purchase
Easy fix and great video
Recieved part within a week. Perfect condition. I will use part select again and I also recommend them to others
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2082000
Manufacturer Part Number: 74004053
Brand
Model Number
Description
Magic Chef
31003SAA
Range - Freestanding, Gas
Magic Chef
31003SAW
Range - Freestanding, Gas
Magic Chef
31203KAW
Range - Freestanding, Gas
Magic Chef
31203PAA
Range - Freestanding, Gas
Magic Chef
31203PAQ
Range - Freestanding, Gas
Magic Chef
31203PAV
Range - Freestanding, Gas
Magic Chef
31203SAA
Range - Freestanding, Gas
Magic Chef
31203SAW
Range - Freestanding, Gas
Magic Chef
31203WAA
Range - Freestanding, Gas
Magic Chef
31203WAW
Range - Freestanding, Gas
Magic Chef
31213SAA
Range - Gas
Magic Chef
31213SAW
Range - Gas
Magic Chef
31213WAA
Range - Gas
Magic Chef
31213WAM
Range - Gas
Magic Chef
31213WAV
Range - Gas
Magic Chef
31213WAW
Range - Gas
Magic Chef
31213XAA
Range - Gas
Magic Chef
31213XAW
Range - Gas
Magic Chef
61S04PAA
Range - Gas
Magic Chef
61S04PAW
Range - Gas
Magic Chef
61S14WAA
Range - Gas
Magic Chef
61S14WAW
Range - Gas
Magic Chef
61S14XAA
Range - Gas
Magic Chef
61S14XAB
Range - Gas
Magic Chef
61S14XAW
Range - Gas
Magic Chef
8241RA
Cooktop - Gas
Magic Chef
8241RB
Cooktop - Gas
Magic Chef
8241RS
Cooktop - Gas
Magic Chef
8241RT
Cooktop - Gas
Magic Chef
8241RV
Cooktop - Gas
Back to Top

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service
Top Burner Igniter
$ 33.12   In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.

Close