2079029-1-M-Whirlpool-715396K-Indicator Light Kit
Part Location Diagram of 715396K Whirlpool Indicator Light Kit
See part 4 in the diagram
( Grid squares measure 1x1 inch )
2079029-1-S-Whirlpool-715396K-Indicator Light Kit 2079029-2-S-Whirlpool-715396K-Indicator Light Kit Part Location Diagram of 715396K Whirlpool Indicator Light Kit
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Indicator Light Kit 715396K

Rated by 6 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 55.70
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS2079029
Manufacturer Part Number 715396K
Manufactured by Whirlpool for Jenn-Air, Kenmore, Hoover, Hardwick

Jump to:

Product Description

Indicator Light Kit Specifications

This indicator light kit comes with two red jewel light lenses.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Cooktop, Range, Wall Oven, Microwave Oven Combo.
Part# 715396K replaces these:
AP4090437, 1585, 7-15396, 715396, 715396K, JA99715396
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.1 / 5.0, 6 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replace burnt out indicator light
I feel that the design of the indicator light, with the base attached to the bottom of the lens, is ingenious in that it eliminates the need for fasteners in that confined space, However, the plastic used for the base needs to be more flexible. Part of the base broke off in trying to force the base over the bottom of the lens. Fortunately, there was enough left on the base that I could slip it over the bottom of the lens and complete the installation.
Read less
  • Melanie from SALIDA, CO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Downdraft blower motor noise, fluctuating fan speed and binding. Also replaced indicator light for burner knob.
1. Turned off electrical breaker at electrical service panel.
2. Tested stove top to verify correct breaker was off as well as cook top.
3. Removed front electrical connection panel @ cook top.
4. Disconnected wires to blower fan. (Before disconnection I color coded wires for correct reconnection)
5. Removed the bracket holding the armored cable (protecting motor wires) and removed wires (where connects to electrical connection box).
6. Removed 4 nuts @ blower motor housing and removed blower motor housing and fan.
7. Removed 3 screws that attached the blower fan to the blower motor housing noting or marking the position of the housing to the motor bracket in order to have the same placement position.
8. Pulled the 3 connecting wires from the armored cable protector to separate housing from motor.
9. Removed the fan assembly from the blower motor shaft by using an allen wrench carefully noting the distance from motor face to the fan.
10. Noting/marking the position of the motor mounting bracket connections unscrew the nut and screw that secures the bracket to the motor.
11. Reassemble in reverse order.
Note:
I taped the motor wires tightly together every 3 or so inches to be able to slide through the armored cable.
I also had to rotate the mounting bracket a little to be able to perfectly match the motor housing to the motor bracket.

The new fan motor works great but it's a little bit louder.
Read less
Other Parts Used:
Motor Isolator Indicator Light Kit
  • John from FRESNO, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set, Wrench set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
blower motor died
Pulled the motor and blower wheel from below. Replaced both. I think it was easier to replace the two together than just the motor.I also had old light indicators so we replaced them since the stove was sort of apart. The repair was not difficult at all, and my 30+ stove top looks and runs great!
Other Parts Used:
Indicator Light Kit Blower Motor Exhaust Vent Blower Wheel
  • Janellen from Aiken, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Wrench set
35 of 56 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dead element; broken switch shafts; light out
This was a piece of cake since the parts were a perfect replacement. I took the element apart and replaced the two receptacles by cutting the old wires and using the included wire nuts to splice the wires. The two switches were easily replaced by carefully connecting the wires like they were hooked up on the old switches. The indicator light was also easily replaced, although snapping the lens into place seemed to take a lot of force (I was afraid that I might break it). All in all, quite easy.
Read less
Other Parts Used:
Infinite Switch Indicator Light Kit Surface Burner Receptacle Kit
  • Robert from Gainesville, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
14 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner would n.ot het hot
We unscrewed the top plate, unscrewed the top of the switch removed the ballast underneath and it worked. I was so glad to be able to still get the parts.
Other Parts Used:
Drip Bowl - Chrome - 8 Inch Drip Bowl - 6 Inch Indicator Light Kit Surface Unit Infinite Switch Kit
  • Jeffrey from Clearwater, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Oven Handle and Missing Indicator Light
Removed the outer cover from the oven door by taking out approx. 9 screws. Cleaned the inside while I had it off. Attached the new handle with two screws (weren't included) had to use old screws. Then reattached the cover.
Replaced the indicator light by removing approx. 4 screws from the control panel. Slipped the new indicator lens in the hole and slid the light socket into place to hold the lens. Reattached the control panel.
Job Complete!
Read less
Other Parts Used:
Indicator Light Kit Oven Door Handle Assembly
  • Tina from Hernando, MS
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
5 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ed
February 11, 2018
I am replacing an infinite switch. I have the bolts on the infinite switches (4) released and the screw behind the cover loosened. I need to remove the bulbs in order to remove the cover. I do not want to damage the bulbs. Can you help?
For model number C201
PartSelect logo
Hello Ed, Thanks for your question. You will need to remove the air grill. On the rear of the control there are two screws in the vent area to remove. Lift the control carefully and tilt it back. The LED lights clip onto the lens to stay in place, and can be unclipped. I hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Back to Top
You May Also Need ?
Surface Burner Knob
$31.31
$31.31
  In Stock
Surface Unit Infinite Switch Kit
$159.91
$159.91
  In Stock
Infinite Switch
$90.02
$90.02
  In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
$12.58
  In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
$19.09
  In Stock
Produce Preserver Filter
$21.50
$21.50
  In Stock
Affresh Cleaner
$19.09
$19.09
  In Stock
Cooktop Cleaner
$17.74
$17.74
  In Stock
Affresh Washing Machine Cleaner Tablets – 6 Count
$21.14
$21.14
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2079029
Manufacturer Part Number: 715396K
Brand
Model Number
Description
Kenmore
21246
Range - Kenmore Range/Stove/Oven Model 21246(1988) Parts
Kenmore
21334
Microwave Oven Combo - Kenmore Oven/Microwave Combo Model 213.34 (21334, 213 34) Parts
Jenn-Air
22001
Cooktop - Electric
Jenn-Air
22112
Cooktop - Electric
Jenn-Air
22113
Cooktop - Electric
Jenn-Air
22116
Cooktop - Electric
Kenmore
22302
Range - Kenmore Range/Stove/Oven Model 22302(1988) Parts
Kenmore
22303
Range - Kenmore Range/Stove/Oven Model 22303(1988) Parts
Jenn-Air
22305
Cooktop - Electric
Kenmore
22306
Range - Kenmore Range/Stove/Oven Model 22306(1988) Parts
Kenmore
22308
Range - Kenmore Range/Stove/Oven Model 22308(1988) Parts
Kenmore
22309
Range - Kenmore Range/Stove/Oven Model 22309(1988) Parts
Jenn-Air
22401
Cooktop - Electric
Hoover
4760
Range
Hoover
4770
Range
Hoover
4775
Range
Hoover
4790
Range
Hoover
4855
Range
Hoover
4860
Range
Hoover
4870
Range
Hoover
4875
Range
Hoover
4890
Range
Kenmore
62922001
Cooktop
Kenmore
62922112
Cooktop
Kenmore
62922113
Cooktop
Kenmore
62922116
Cooktop
Kenmore
62922401
Cooktop
Jenn-Air
88168
Range - Freestanding, Electric
Jenn-Air
88169
Range - Freestanding, Electric
Jenn-Air
88170
Range - Freestanding, Electric
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service
Indicator Light Kit
$ 55.70
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.