This is a blower motor for your range, but you may also know it as a blower fan motor or a downdraft vent fan motor. This part is used with down draft models. It helps draw the steam and odors through the vent for the stove top when the switch is activated. The blower motor has a diameter of five inches. The shaft on this model has a 3/8-inch diameter with a counter clockwise rotation. This motor includes the foam seal.
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
RICHARD
May 8, 2018
Motor runs off and on. Does this usually mean the motor is about shot ? If so, how do i remove the motor from the plenum > thanks for your help !
For model number C201
Hello Richard, thank you for your question. If the fan motor is turned on, and starts and stops when engaged the issue is either the switch for the fan or the motor. The switch can be tested with a multimeter to determine if it is the problem. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Frances
August 2, 2019
Am concerned because of the number changes in the part that i have saved in the cart. I need to be sure that it will work with the model number of stove that i have.
For model number PS 207 6843
Hello Frances, thank you for writing. We would be happy to look into this, but we will need the model number for your stove to do so. We look forward to hearing back from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robin
May 30, 2022
JES9860CAB01. Hi there fan switch goes on it has power but the fan for the downdraft does not work? What do I need to purchase for parts or is the problem?
For model number JES9860CAB01
Hi Robin,
Thank you for your question. If the fan switch has power and the blower motor is not working, then it may be malfunctioning and you will need to replace it. The part number listed under your model number for the blower motor is PS11750204. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
blower motor died
Pulled the motor and blower wheel from below. Replaced both. I think it was easier to replace the two together than just the motor.I also had old light indicators so we replaced them since the stove was sort of apart. The repair was not difficult at all, and my 30+ stove top looks and runs great!
Important: Down load the helpful assembly diagram for the fan motor and study it for a few minutes. It's very straight forward. Also a good idea is to remove the bottom panel which comes off easy before starting.
My only problem was removing the existing blower/fan wheel without damaging it once I had the assembly on the work bench. It was rusted on tight and managed to remove after a few tries using penetrating oil. The wheel is in stock and I'd suggest buying a new one along with the new motor if I had to do the job again.
Bottom line; the fan motor fit perfect but did have to re-use part of the old existing electric pig tail because the motor does not come with the factory type motor terminal connectors. By using three twist on wire connectors was back in business. The down draft vent works like new.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff