Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This is a push-and-turn switch. This kit includes all necessary hardware to install the part. Switch comes with a D-shaped shaft.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Stephen P - February 28, 2018
Verified Purchase
Easy to install after checking robertshaw.com conversion diagram.
Excellent buying experience from partselect. The new infinite switch had slightly different letters corresponding to the plugs because the new switch is an upgraded version. The photo shown on partselect.com is the old version. After reading the Robert Shaw conversion diagram on robertshaw.com, I was able to connect the wires properly. You could just guess, but I like to be sure when working with electricity. This was such an enjoyable and useful project for me that I posted a Youtube video on how I did the job. Look for " Jenn Air cooktop goes full hot." Partselect could enclose the Robert Shaw conversion chart with the new switch to simplify the installation process for novice diy folks.
★★★★★
★★★★★
William P - December 13, 2018
Verified Purchase
Right part
Just what we needed
★★★★★
★★★★★
BETH J - March 10, 2018
Verified Purchase
thanks
easy to install...great to have my stove working again!!!
★★★★★
★★★★★
Jim C - August 24, 2019
Verified Purchase
I
Good part. Worked as expected
★★★★★
★★★★★
Louis P - February 14, 2019
Verified Purchase
Working Part
The replacement part was in good condition. Once I figures out the correct wiring sequence it was easy to replace. My appliance is back in working condition.
★★★★★
★★★★★
Dale K - March 31, 2021
Verified Purchase
Infinite switch
Great part needs better labeling of the switch on the back or maybe just a piece of paper. Letting people know what connections are
★★★★★
★★★★★
Richard B - November 15, 2021
Verified Purchase
More information needed
More information needed on the variable control, and pilot hook up.
★★★★★
★★★★★
Glenn O - August 2, 2019
Verified Purchase
Wrong part...
The part number on the OLD switch is 240P-977. Below it is 203147. 240vac
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 32 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The switch needed to be replaced
I TURNED OFF THE POWER TO THE GRILL FIRST. Then Removed the knob on the top face plate and then removed the 2 self tapping screws at the high end and this allowed the face plate to be pushed forward. And allowed access to remove the switch I removed the wires one at a time and replaced them on the new switch. All done in 20 minutes.
Nora from AUBURN, WA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken knob dhaft
Replaced wires from broken to new part.
Richard from THE WOODLANDS, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner shorted out and runied the switch
Replaced the switch and put the new surface element in and it works great.
Rear burner always high, ignored temperature setting.
Turned off breaker for range. Removed 4 phillips screws on control panel, tipped it forward and rested it on top of partially open oven door. Removed knob and nut on old switch. Moved wires, one at a time from old to new switch. Put new switch in place, tightened nut and pushed on knob. Put control panel back in place and installed 4
... Read more screws... piece of cake.
Read less
Dana from Chapel Hill, NC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The stem of one of my burner switches broke off so I had to replace the switch.
Replacing the switch was very easy. First I unplugged the range to be sure there would be no electrical power to the switch. Then I removed four screws to remove the switch cover plate (located above the oven door). I disconnected the wires from the pin connectors on the broken switch, then removed the switch by removing one hex nut.
... Read moreThe new switch was installed by reversing the removal procedure. Took about 15 minutes total time.
Read less
John from Fulton, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
0 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
small burner only came on to high temp. no variable
I installed a new infinite switch, which created a new problem. The large burner switch turned the small burner on. I replaced the large burner switch an that stopped that problem. But now the small burner still only comes on to high temp. Need help in determining how to correct that problem.I had already replaced the small burner switch
... Read morebefore I replaced the large burner switch and I still have the small burner only coming onn to high heat.
We love our Jenn-Air electric range that we have owned since 1983 and couldn't get parts from where we bought it recently. We called around to Sears and other appliance dealers and they couldn't help us. We found your company searching on the internet and we are very much pleased with your parts listing and your great service. We will be
... Read moreback. Jody and Mike Hayden, Eden, Vt.
two of the surface unit infinite switch D-shaped pins were broken
following the directions in the package and on-line, this repair was easier than i could have imagined. changing out these two parts took less than 15 minutes.
1st-turned off breaker, 2nd- took out the two screws that hold the control panel and lifted it up so I could remove the surface unit switch,3rd- removed wires from old switch and securing nut and removed old switch,4th- installed new switch and plugged in wires, then turned on breaker to see if burner would work and it did. 5th-turned off
... Read more breaker again and removed the wires from the fan switch and used nut driver to remove retainer nuts,6th-installed new fan switch and plugged in wires, 7th- put control console back in place and the two screws that hold it in place. Turned breaker back on and everything worked.Didn't use the burner receptacle or burner.
Turn off elec. power at breaker box. Check twice. Removed burner switch cover. caarefull remove wires from switch, note with color to which terminal remove nut on switch replace new switch replace wires to switch, replace cover turn on power. ready.
John from Seguin, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
18 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Leo
November 13, 2018
Does this switch fix my problem which is when i turn on my rear left coil goes straight to high heat no low
Hello Leo, Thank you for the question. If the element turns on but goes right to high, the switch that controls the element will need to be replaced. If you can provide the model number of the appliance, we will be happy to verify the parts number for you. Thank you for your inquiry, good luck with this repair!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Drew
December 31, 2019
Does part number 700855k a push and turn infinite switch have the wire connections on the bottom of the part or are the wire connections around the outside of the part. Your pictures show the connections on the bottom but other people i know have ordered this part number from other places and it has the wire connections around the outside and is made by robert shaw and has a part number of w10894486 but is sold as part number 700855k. I really need the wire connections on the bottom so just want to make sure. Thanks drew purvis
Hello Drew and thank you for writing.
The connections are as shown in our picture, so the way you need them. Part numbers w10894486 (manufacturer part number) and PS700855k (our number) are the same item. We hope this helps. Please contact us anytime if you require further assistance.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Joseph
December 26, 2017
Does this switch work with the 8'' and 6'' burner. Is there a front and rear model.
For model number D120
Hi Joseph,
Thank you for your question. It looks like this switch would work for all of your burners. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Linus Paul
April 9, 2018
Does part come with wiring diagram ? We tried another switch from another supplier and did not work. Some how the wires seem to be switched in all the confusion . I thought we saved all the wiring diagram . Where can i find the proper way to wire the new switch. Thank you
For model number C221
Hi Linus,
Thank you for your question. There is an instructions sheet that comes with the switch. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Elizabeth
December 2, 2019
Our electric panel is outside, and one of our California deluges soaked in the breakers for our Jenn-Air cooktop. My husband dried the area and breakers, reinserted it, but our cooktop's heating elements are not receiving power. The fan works, the lights work. Is there a breaker on the underneath of our cooktop? Or do I need these "infinite" switch replacements? Would that be all of the switches on the top, or is that a control under the cooktop. We are not handy by any stretch of the imagination, so if these are dumb questions, sorry. Ours is 47 inch wide, ca 1987, electric, 4 burners, grill and frywell. I cannot find parts for the frywell either. Model number C301 and serial number 346818RR.
For model number C301
Hi Elizabeth,
Thank you for your question. If the elements on top of the stove are not lighting, you will need to check the check the electric burners, the switches and the terminal wiring with a multimeter to see which part is causing the issue. To test the terminal wires, Visually inspect the terminal block for any signs of damage, cracking, or burning. Using a multimeter on the Rx1 setting, touch the probes to the terminals. If your receptacle has multiple sets of terminals, test each set individually. If there is continuity, your multimeter will produce a reading of zero. If you receive any reading other than zero, you will need a replacement receptacle. To test the switches, place your multimeter on Rx1 mode, test for continuity by touching the L1 and H1 terminals with the probes. Once you have completed that test, touch the probes to the L2 & H2 terminals. If your test results indicate that there is no continuity between one or both sets of terminals, you need a replacement infinite switch. To test for a shorted element, touch each of the terminals one at a time with one probe while holding the other probe to the outside surface of the element. If either terminal show continuity, it is defective. To test the entire element for continuity, place each of the probes on the terminals, one on each. The exact reading you should receive varies between models, refer to your owner’s manual to determine what yours should be, but if any element has a reading outside of 19 to 115 ohms, it is defective. If you do not receive the correct readings from the tests above or find damage on your element, you will need a replacement surface burner element. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Peter
December 6, 2019
The 2 larger solid elements do not heat up to their full heating capacity whereby it takes a long time to even boil water. What could be the problem and what part numbers might i need? Thank you.
For model number C301 (Jenn-air cooktop with 2 large solid elements, 2 smaller solid elements, & a center grill
Hello Peter, thank you for writing. This is likely due to a faulty Infinite Switch, this part number PS2076107 for your model. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dave
December 11, 2019
Is this a set of four or only a single switch?
For model number C201
Hello Dave, Thank you for the question. This kit includes all necessary hardware to install the part and the individual Switch. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jim
July 11, 2019
Please provide bottom view so I can see location and number of blade connections. Also, list of included parts in kit. Thanks.
For model number Jenair c221
Hello Jim, Thank you for the question. This kit includes all necessary hardware to install the part. We can not send pictures through Q&A sorry but you can google image the Manufacturer Part Number 700855K for more views to see the 5 blade connectors. Hope this helps!
Was this helpful?
Thank you for voting!
Jerry
December 26, 2023
Tried to replace Infinite burner control switch on 40 year old Jenn Air cooktop. Old part has these numbers: INF-240P-871 201241 240VAC
Part number on the package of the new switch: 700855K.
Old one has different markings for the wires than the new one, and the new one has a place for a wire that is labeled with a blue dot. The old one does not have this. I labeled the wires with the labels from old switch, and put them on the new switch with the same labels. Must have done something wrong, because when we turned the breaker back on, the knob made a popping sound. We immediately turned breaker back off, assuming the switch is ruined? If we order a new one, how can we install it correctly? Also, the shaft was not aligned "squarey" with the switch. In order for my knob to work, the flat side of the D needs to be parallel to the front (top) of the switch. Instead, it's slanted.
For model number C300
Hi Jerry, thank you for reaching out. We have found the instructions to install the infinite switch, part number PS2076107. These may not be of the same model but will help you in installation. You may need to follow these steps:
1. Shut off the circuit breaker.
2. Remove the vent grill and locate the screws that hold the control panel and then remove them.
3. Pop the knob off and pull it straight off.
4. Take off the nut with the wrench.
5. Lift the control panel straight up, you have to slide it forward a little, and then pick it up.
6. Under the control panel, you'll see the infinite switches.
7. Took the one out that is labeled P l1 l2 top a ch2 h2 and h1.
8. Once you get all the wires, fastened them back onto the new infinite switch.
9. Secure the nut at the top with the wrench.
10. Tight it and make sure that the orientation for your knob is correct.
11. Push it in and make sure that it pops up to the off position.
12. Follow the steps backward to complete the installation.
We hope this information helps!
Was this helpful?
Thank you for voting!
Jack
July 19, 2021
Part #wpl-700855k. Is this rocker switch used to turn on the exhaust fan ?
For model number C-201
Hello Jack, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2005746. We looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with he updated substitution number. We hope this helps!
