Install videos!
2052494-1-M-Whirlpool-56000-Blower Wheel
Part Location Diagram of 56000 Whirlpool Blower Wheel
See part 9 in the diagram
Replacing your Amana Dryer Blower Wheel
2052494-1-S-Whirlpool-56000-Blower Wheel 360 view
( Grid squares measure 1x1 inch )
2052494-1-S-Whirlpool-56000-Blower Wheel 2052494-2-S-Whirlpool-56000-Blower Wheel 2052494-1-S-Whirlpool-56000-Blower Wheel 360 view
Part Location Diagram of 56000 Whirlpool Blower Wheel Replacing your Amana Dryer Blower Wheel
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Blower Wheel 56000

 Fits your LG1112!
★★★★★
★★★★★
10 Reviews

Rated by 17 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 64.21
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your LG1112!
PartSelect Number PS2052494
Manufacturer Part Number 56000
Manufactured by Whirlpool for Amana, Speed Queen, Maytag, Whirlpool
Product Description

Blower Wheel Specifications

If your dryer is noisy, will not tumble, or is not producing enough heat, you may need to replace the blower wheel. This part is white in color, and is made of plastic. This part is approximately 8 inches in diameter. The blower wheel is located near the bottom of your dryer cabinet. To access it for this repair, you will need to remove both the front panel and the front bulkhead assembly. Before you begin this repair, be sure to disconnect the power source to the dryer. To complete this repair, you will need a 5/16 inch nut driver, a 1/4 inch nut driver, a pair of locking pliers and a 7/8 socket with a short extension and a ratchet.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Amana Dryer Blower Wheel

Replacing your Amana Dryer Blower Wheel
Back to Top
Troubleshooting
This part fixes the following symptoms:
Noisy
This part works with the following products:
Dryer, Range, Washer Dryer Combo.
Part# 56000 replaces these:
AP4062362, 1004897, 14218925, 56000, 56000P, R0603532, R6035-32
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
5.0
Filter By Rating:
  • 5 Stars
    10
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Robert F - May 1, 2024
  Verified Purchase
Easy repair. The parts were all correct and delivered quickly.
The parts fit properly. The dryer is back in service.
★★★★★
★★★★★
Mike B - January 14, 2024
  Verified Purchase
dryer blower wheel
great fit, works fine now
★★★★★
★★★★★
Donald T - November 2, 2022
  Verified Purchase
Great part correct fit
Fairly easy fix, back in service after about 1 hour
★★★★★
★★★★★
Guy S - July 31, 2022
  Verified Purchase
No problems
Fit perfect
★★★★★
★★★★★
Jacob M - July 11, 2020
  Verified Purchase
Quick fix
My dryer was getting hot but the clothes would not dry. It would eventually overheat and turn off. I checked the vent system and couldn't find any clogs. The blower wheel appeared to be fine but was wobbly. I swapped it out with the new blower wheel and now it works great.
★★★★★
★★★★★
Mark K - February 4, 2019
  Verified Purchase
Replacing Blower Wheel
The part came in 2 days and in great condition. Taking the old wheel off was a little difficult because the plastic was stripped around the metal hub so I drilled small holes in the plastic around the metal hub to break it apart, then I could get blower wheel out and get a vice grip on the hub. total repair time still only took 45 minutes. My wife is happy so I thank parts select. mark
★★★★★
★★★★★
Joe H - January 22, 2019
  Verified Purchase
It went good
Fun fun fun
★★★★★
★★★★★
Paul R - June 14, 2018
  Verified Purchase
easy repair
The wheel was shipped fast, worked great, the dryer is up and running great.
★★★★★
★★★★★
Torey T - April 1, 2018
  Verified Purchase
Fast shipping
Very satisfied, exact fit, and ordering was easy. I received the part the next day.
★★★★★
★★★★★
Michael M - March 13, 2018
  Verified Purchase
GREAT PART / REPAIR WENT WELL.
PART WAS RIGHT AND DRYER WORKS PERFECTLY AGAIN!
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.8 / 5.0, 17 reviews. What's this?
Sort by:
  • 1
  • 2
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Noisy and blower wheel spin without turn motor shaft
Removed lower panel, door assembly, belt and drum.
Removed blower wheel cover.
Used dremmel tool to cut plastic from metal that attaches the blower to the motor shaft.
Used adjustable wrench to keep motor shaft from turning.
Used vise grip to clamp on metal and turned to loosen blower wheel.
Attached new blower and re-assembled.
Read less
  • William from FORT WAYNE, IN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Delaminated blower fan
I followed the online video on PartSelect website. No other instruction necessary.
  • Geoffrey from GREAT FALLS, VA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I changed multiple parts on my dryer.
I totally disassembled the Dryer, and replaced the Guide Rollers, Blower Wheel, Idler Pulley Shaft, Idler Pulley, and Belt.
  • Edward A. from PHILADELPHIA, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy and not drying the clothes
This was my first time repairing a dryer. If I knew when I started the project what I know now, it would have been an easy repair. First, you should know that the series number (used for selecting a wiring diagram) is the last two digits of the unit's serial number (not model number). In my case, the series number was 11. The hardest part for me was figuring out how to take the dryer apart. I made the mistake of starting with the top instead of the front. In fact, I removed the control panel and disconnected all the wires, labeling them carefully, and creating a diagram, so i could put it all back together later. I now realize I could have left that all together and just lifted the top up in the front without removing it. That knowledge would have saved hours of work, so I hope it helps someone (prop up the front a few inches and start by removing the panel on the lower front, then remove the screws on the main front panel, and then pull out the bottom of that panel toward you until the top of that front panel disengages from the top of the dryer - the rest is obvious). So it turns out there were two separate problems: 1) the blower wheel had broken completely off of the motor so it wasn't spinning - this is why hot air wasn't being pulled through from the heater in the back of the dryer; 2) the pulley on the spring-loaded lever arm attached to the motor was squeaking due to lack of lubricant. So the solution was to replace the blower wheel and spray WD-40 in the pulley (and also, for good measure in the roller bearings that support the drum in the back of the dryer). Most of the time spent on the repair was just due to my own mistakes. In particular, once I got everything back together after the repair, it stopped squeaking and there was good airflow, but it wasn't heating. I spent an entire day trying to troubleshoot the lack of heat. I tested and bypassed all of the thermostats and heater fuses and the heating element still wouldn't come on. I even managed to accidentally ground one of the leads from the fuse and had to replace a melted wire connector (trip to the Shack). In the end, it turned out that a wire which had been accidentally disconnected from the main power cord to the dryer, I had put back in the wrong spot. There is L1, L2, and neutral going into the dryer. I had the heater on the same circuit as the motor and other stuff. Once I traced the wiring diagram back, I realized this and corrected it by putting the heating circuit back onto L2. Now it "hums like a Singer". If everything had gone smoothly, instead of being a 2-day repair, it would have been a 2 hour repair. 2 hours instead of 1 because to get the leverage I needed to remove the old blower nut, I had to actually pull the motor assembly out of the dryer and move it to my workbench. Someone who is strong or more limber or has better tools might be able to skip that step, reducing the time by about 45 minutes. Good luck!
Read less
  • Pietro from Fairfax, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable), Wrench set
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud Grinding type noise - Broken Blower Wheel
Very simple repair. Remove front panel, door, drum etc. Try to keep everything seperated, screws etc. I put lockjaws on the back to get the nut off the front. Make sure to check the housing for "melted on" blower wheel residue. Easy enough to remove. I checked with my local parts dealer he wanted twice the price and needed to order it (at least a days wait). PartSelect sent the exact same part in a day and a half. Put everything back the same way I removed. Hardest part is the drum and belt. While you have everything apart don't forget to clean the thermastats etc. PartsSelect was quicker and cheaper.
Read less
  • Ron from Portage, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set, Wrench (Adjustable)
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat ... rattle ... no air through vent
Determined no air flow or heat through system even though dryer spun and timer worked. Ouside vent dispelled no air. Opened dryer panel.
Blower wheel/fan broken off from shaft. Googled appliance parts ... found ... Partselect .... keyed in mfg, model number ... schematics available ... found part ... ordered ... received in two days ... installed ... reassembled. Working fine ! $ 30.00 compared to buying new dryer ! This was a refreshing and rewarding repair. If it could always be this smooth !!! Great resource ... PARTSELECT !
Read less
  • Pete from Charlotte, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer started making a terrible sound, when my son opened up the appliance he found that the Blower wheel was broken and the housing was full of debris.
My son will discribe how he did the repair.
First I opened the top, then I removed the front with a 1/4 inch ratchet and socket. I took the cover off the blower housing with a nut driver. Used the appropriate socket and a 1/2 inch ratchet, and an adjustable wrench to hold the motor shaft and removed the Blower wheel. I replaced the broken Blower Wheel and put all it back together.
Our dryer is now working great and there are no unwanted sounds emanating from within. We are very happy with PartSelects promptness and that we recieved the correct part as ordered. PartSelect website was easy to navigate. We plan if the need arises to do so again in the future.
Thankyou Frank and Rodney
Read less
  • Frank from HOOPA, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Socket set, Wrench (Adjustable)
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Load noise from dryer
Had to figure out how to open the dryer - bottom screws in front and work up, removed the drum and found the fan blade was broken. Had some difficulty removing the fanblade from the motor shaft but after that the new one was easy to install. I did need help to place the belt and drum back into place. as one person has to hold the belts on the pulley while the other adjusts the belt while putting the drum back into place.
Read less
  • Mike from Pacifica, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Socket set, Wrench (Adjustable), Wrench set
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer racket, not drying clothes
Being my lousy Maytag washer died THE PREVIOUS DAY, spewing water, etc. and I had rushed out and bought a new washer, I was determined not to replace the dryer (though I now am a serious NON_FAN of Maytag).

I disassembled the whole dryer and finally got to the blower wheel which was broken lose from the molded nut. I supposed something like a dime or penny got in there to shred it.

PartSelect's website allowed me to find the part in 5 minutes. It was on my doorstep the next afternoon.

Installation was straightforward BECAUSE I stacked all the screws and and labeled them appropriately. It took about 30 minutes to reassemble and the toughest bit was getting the drum in with the belt positioned properly.
Read less
  • Richard P from Fort Worth, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer making a lot of noise and clothes were getting very hot
Remove the 2 screws at bottom of front panel, remove lower panel. Then remove the two screws at bottom of front door. Lift door forward so spring hooks can disengage from the top panel. remove door, disconnect the 5 wires to the door latch and light. remove the two screws at top of dryer to lift up top panel. Remove 4 screws at the front holding the drum. Disengage the belt from the tension pulley and remove drum. Replaced both roller wheels at the rear of the drum( one was broke). Then remove the screws (about 6 holding the plate in front of the blower wheel. Use a wrench to hold the nut at the back of the motor and a scocket wrench to remove blower wheel. (The Blower wheel was broken from the shaft and was spinning freely). Then do it all backwards to re assemble. i spent more time cleaning the lint from the inside than I took making the repair!
Read less
Other Parts Used:
Drum Support Roller Blower Wheel
  • MedPro from Crest Hill, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Wrench (Adjustable), Wrench set
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
STEPHEN
July 30, 2022
Does this part fit LEA30W?
PartSelect logo
Hi Stephen, Thank you for your question. Yes, this would be the correct blower wheel for your dryer. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
  • 1
Back to Top
You May Also Need ?
Multi Rib Belt
$9.43
  In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
  In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
  In Stock
Produce Preserver Filter
$21.50
  In Stock
Affresh Cleaner
$19.09
  In Stock
Cooktop Cleaner
$17.74
  In Stock
Affresh Washing Machine Cleaner Tablets – 6 Count
$21.14
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2052494
Manufacturer Part Number: 56000
Brand
Model Number
Description
Amana
7493-LEM437
Dryer - DRYER
Admiral
ADE7005AKW
Dryer - Residential
Admiral
ADE7005AYW
Dryer - Residential
Admiral
ADE9005AGW
Dryer - Residential
Admiral
ADG7005AWW
Dryer - Residential
Speed Queen
AE3213
Dryer - Residential
Speed Queen
AE3413
Dryer - Residential, Electric
Speed Queen
AE4113
Dryer - Residential
Speed Queen
AE4213
Dryer - Residential
Whirlpool
AE4413
Dryer - Whirlpool Dryer Ae4413
Speed Queen
AE5113
Dryer - Residential
Whirlpool
AE5213
Dryer - Whirlpool Dryer Ae5213
Speed Queen
AE5413
Dryer - Residential, Electric
Speed Queen
AE7133
Dryer - Residential
Speed Queen
AE7233
Dryer - Residential
Whirlpool
AE9133
Dryer - Whirlpool Dryer Ae9133
Whirlpool
AE9233
Dryer - Whirlpool Dryer Ae9233
Speed Queen
AE9433
Dryer - Residential, Electric
Whirlpool
AEE933
Dryer - Whirlpool Dryer Aee933
Speed Queen
AEE953
Dryer - Residential, Electric
Speed Queen
AEM197
Dryer - Residential, Automatic
Speed Queen
AEM333
Dryer - Residential, Electric
Speed Queen
AEM353
Dryer - Residential, Electric
Speed Queen
AEM377
Dryer - Residential, Automatic
Whirlpool
AEM397
Dryer - Whirlpool Dryer Aem397
Speed Queen
AEM407L
Dryer - Residential, Automatic
Amana
AEM407L2
Dryer
Speed Queen
AEM407L2-PAEM402L2
Dryer - Speed Queen Dryer Model AEM407L2-PAEM402L2 (AEM407L2PAEM402L2, AEM407L2 PAEM402L2) Parts
Speed Queen
AEM407W
Dryer - Residential, Automatic
Amana
AEM407W2
Dryer
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service
Blower Wheel
$ 64.21
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.