Non-Adjustable Buzzer 33001623 | Official Whirlpool Part | Fast Shipping | PartSelect
Quick Question!

Have you ever purchased from PartSelect.com before?

Non-Adjustable Buzzer – Part Number: 33001623
Non-Adjustable Buzzer – Part Number: 33001623 Non-Adjustable Buzzer – Part Number: 33001623 Non-Adjustable Buzzer – Part Number: 33001623 https://partselectcom.azureedge.net/Schematics/Maytag/55274.gif

Non-Adjustable Buzzer

Your Price

PartSelect Number PS2035482

Manufacturer Part Number 33001623

Manufactured by Whirlpool

This part works with the following brands: Maytag, Amana, Crosley, Jenn-Air, International

This part works with the following products: Dryer, Washer Dryer Combo, Washer

Installation Instructions Provided by PartSelect customers like you.
Average Repair Rating: 3.3 / 5.0, 4 reviews
What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Mark from Lafayette, LA
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
WP33002535, 33001623, 306508, 12001541
Dryer squeeking loudly becoming worse quickly
I received my parts promptly and had no problems, they were accurate and fit well.

After removing the screws to the front door and panel I removed the wires to the door switch. Carefully I removed the belt and removed the drum. I took the time to vacuum all of the lent from the inside and and remove from all the wiring, motor and heating elements, etc. I replaced the drum rollers, belt, front glides and a buzzer that was on the blink. I reassembled the dryer and unforetunately the dryer was still squeeking. I later repeated the process and found that the tensioner wheel for the belt was the culprit. I cleaned then greased the bearing portion and replaced it. I reassembled the dryer a second time and now it's quiet as a mouse. By the way, you will need a rivet gun to replace the front glides and I recommend you give the belt tensioner wheel a good inspection the first time.

If your dryer is squeeking, go ahead and order the tensioner wheel also, it's a little money spent toward making sure you get rid of the noise! It might save you a lot of time and trouble.
333 of 415 people found this instruction helpful.
Was this instruction helpful to you?
Thomas from Inverness, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
33001623
Buzzer did not work.
First I removed the four screws that hold the back cover of the control panel. I then disconnected the two wires from the buzzer and removed two screws holding the buzzer. Install the new buzzer.
8 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Jack from Oro Valley, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
33001623
Buzzer didn't work
Unplug dryer--remove back panel of control console--swap out buzzer--cover back--plug in--good to go.
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Joseph from Baldwin, NY
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set
Parts Used:
WP33001632, 33001623, WP489128
dryer did not shut off no heat
took control pannel apart removed timer took new timer and replaced wire for wire the mounted new timer . removed old buzzer and replced wire for wire then mounted new buzzer screw was just in case I lost or stripped old one not needed . reassembled control pannel ,tested and found I needed more parts no heat so I opened the bottom and I ordered Igniter, sensor ,and thermostat and new coil kit . now i have heat but thermostat is back ordered timer works but not on regular auto dry but I do have heat ?? it has to be thermostat . now all the repair was relitivly easy but you had to watch and be carefull of what you were doing . when thermostat comes in I hope that will solve all the problems if not
5 of 16 people found this instruction helpful.
Was this instruction helpful to you?