
Pulley
$
105.09
In Stock



Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
PartSelect Number PS2020240
Manufacturer Part Number 22002315
Manufactured by
Whirlpool
You May Also Need?
Troubleshooting
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Maytag, Crosley, Amana.
Part# 22002315 replaces these:
AP4027333, 824614, 22001998, 22002315
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
March 8, 2019
Belt rolls to back of pully rubs back of drum should i just replace belt or can the pully be worn out too
For model number MAH5500BWW

Hello David, Thank you for the question. This sounds like the belt is wore out and stretched and not sitting on the pulley securely. I suggest replacing the belt, PartSelect Number: PS2003327. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Marc
July 2, 2019
What is the outer diameter of part 22002315? I think the wrong drum pulley has been installed and i want to make sure before purchasing a new one.
For model number MAH14PDABW

Hello Marc, thank you for writing. This replacement Pulley for your model is approximately 14.25" in diameter.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ralph
February 2, 2022
I replaced belt and belt migrates to back of tub and is rubbing into outer tube. Does the pulley have raised edges on both sides to prevent from belt coming off. The pulley I have now has a raised edge on outside, but is smooth on inside next to tube. Has that raised edge been worn off.
For model number MAH6500AWW

Hello Ralph, Thank you for the question. Both sides of the pulley should be raised. The one side may have bene running and worn down. The Pulley should be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Chris
November 16, 2019
The washer belt rubs on the back of the tub and will not stay on the wheel. Do I need a new bearing and wheel?
For model number MLG2000AWW

Hi Chris, I would inspect the belt to make sure it is not damaged. This is the most likely part to get worn out. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 1 reviews.
What's this?
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer was so loud in the spinning cycle it sounded like a jet was taking off
We took the washer completely apart. Replaced the bearings, pulley and
belt. We decided to replace anything that involved the spinning cycle while we had it all apart.
It was well worth the time and effort we put into it. It works like a chime
and is very quiet . Silence is golden ! Hopefully it will work another 18 years.
belt. We decided to replace anything that involved the spinning cycle while we had it all apart.
It was well worth the time and effort we put into it. It works like a chime
and is very quiet . Silence is golden ! Hopefully it will work another 18 years.
Other Parts Used:
-
Loanne from W BROOKFIELD, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers, Socket set, Wrench (Adjustable)
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2020240
Manufacturer Part Number: 22002315
Manufacturer Part Number: 22002315
Brand
Model Number
Description
