Maytag/Maytag_Thumb/37271.gif
See part 40 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Syphon Break Elbow Kit with Clamp

★★★★★
★★★★★
5 Reviews
$ 24.62   On Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS2017573
Manufacturer Part Number 208847
Manufactured by Whirlpool
Product Description

Syphon Break Elbow Kit with Clamp Specifications

For drain hose 7/8".

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking | Will not drain
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Maytag, Kenmore.
Part# 208847 replaces these:
AP4024083, 436287, 2-14764, 2-8847, 208847, 214764
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

4 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Carl
    February 16, 2018
    Water will not exit doing spin cycle, why is this happening?
    For model number LA209
    Hello Carl, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: drain pump-check to see if it is clogged first, the drain hoses, the siphon break elbow for the drain hose, siphon break connector, the lid switch, the motor pulley and the drive motor-if it is not spinning fast enough, it may not drain. You can test the parts with a multimeter. Hope this helps!

    5 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Jay Gupta
    January 28, 2019
    We broke the syphon break elbow. On our model, there is no access opening on the back of the cabinet. I need instruction on removing the cabinet to replace syphon break elbow. Is part #ps2017573 the correct syphon break elbow number for our model? Many thanks, jay gupta - jaykgupta@gmail.Com or cell 719-650-5700
    For model number Maytag Washer A512 Series II Ser 115067 BM
    Hello Jay, Thank you for your question. We do have an installation video for this part on our website. Simply enter in the part number PS2017573 on our website and scroll to the installation video below the information for the part. Should you need further assistance, I suggest to contact the manufacturer directly. I hope this helps! Have a nice day!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Paulette
    August 1, 2019
    We replaced the water inlet valve as cold water entered the washer very slowly. Restarted, cold water flowed into the tub nicely. But we now have a leak. Some water came out at the rear left near the upper part of the drain hose. Did we screw something up with our repair, no leak before.
    For model number Maytag LA 512
    Hi Paulette, thank you for you question. I would suggest you check all of your connections to see if perhaps there is a connection that has come loose. You may also just want to check the parts to see if anything was accidentally damaged in the installation. I hope that helps. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
    Doug
    January 14, 2020
    Looking for a siphon elbow - part no. 2-14764 and it seems to be replaced by part # 208847. The replacement part is for a 7/8 drain hose. The original part is for a 1 inch hose. Can you still get an elbow with a 1 inch discharge? Is there an adapter available? Or are you forced to use a 7/8 discharge hose?
    For model number Maytag LA512 Series 4
    Hello Doug and thank you for writing. There is no adapter available as the manufacturer made these changes and is telling us that this is the only available option for your model and elbow part number: PS2017573 is in the list of compatible items for your model. You might not have to change the hose as the included clamp might be able to be tight enough to avoid leaks. We hope this helps. Please contact us anytime.

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your Maytag Washer Syphon Break Elbow Kit with Clamp

      Customer Repair Stories
       Average Repair Rating: 3.5 / 5.0, 21 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Water leak noted on floor at front of washer and at sides
      Occasional noted leak became worse and I had a repair service out. Incorrect detection of outer tub seal made so cancelled them and read comments about raising the top. Did so just at start of a rinse cycle to see soapy water shoot from top of syphon break then continue to dribble out through tub empty process--this is what had cause the water to flow down the interior drain hose and out through the side and bottom near the pump.

      Ordered all the parts shown here and they arrived just in time for planned work. Did not need or use the clamp and gasket purchased as the gasket was included in the break package and I really like the old-style clamps much better.

      Replaced the break and the elbow and put it back together. Things went south on a rinse as water shot out the back hose at the new elbow. I had not realized the size of the new elbow was smaller than the original. Went back to the old elbow but it bothered me that it would still move when the 4 assembly bolt-screws were completely tight.

      So far this seems to have worked. There does not seem to be any leaking at all. For those who read this, the job could be done in about and hour for less than I spent if you observe and diagnose properly. It appears that the washer at the end of the Syphon Break wore out and that is what caused the leak.

      Thanks much to PartSelect for being in business and to all the posters on this site for helping everyone to get these things done right!
      • Jeff from Moorpark, CA
      • Difficulty Level:
        Difficult
      • Total Repair Time:
        More than 2 hours
      • Tools:
        Screw drivers, Socket set
      • Parts Used:
        208847, WP285655, WP214765, 206638
      55 of 63 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      I accidentally broke the syphon elbow kit moving the washing machine
      Simply disconnected 2 screws that hold on a metal cover plate for your arm to fit in.
      Then disconnected 4 screws that hold the syphon in place, remove the syphon elbow and replace it with the new one, insert the four screws again and tighten making sure your arm is holding the elbow from the inside of the machine through the access hole. Then install access panel with the screws, do a test run with the machine pulled out to see if there are any leaks. Done.
      • Alex from Downers Grove, IL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Pliers, Screw drivers
      • Parts Used:
        208847
      14 of 15 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      I broke the elbow when I pulled the washer too far from the wall for another repair.
      I removed 2 screws holding the front of the cabinet and set the front panel aside. Next I removed the screw securing the relay and water level switch to the front of the cabinet, and removed 4 screws holding the top of the washer to the cabinet. I removed the hose, then removed the 4 screws securing the siphon break to the rear panel and pulled it inside the cabinet. I removed the elbow and gasket, installed the new elbow and gasket, and reassembled all parts previously removed. I reconnected the hose and fastened it to the drain, and I was back in business. It took about 35 minutes.
      • George from Smithfield, KY
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Nutdriver, Screw drivers
      • Parts Used:
        WP22003410, WP214765, 208847
      12 of 19 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      loud schreech in dryer
      replaced drum rollers and shafts. Had to go back to your web site and watch the video for replacing the belt. After that it was easy. Thanks for the help. You saved me several hundred dollars
      • Johnny from Warr Acres, OK
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Nutdriver, Screw drivers, Socket set, Wrench set
      • Parts Used:
        WP6-3129480, 208847, 12001541
      4 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The Syphon Break Elbow was broken when the washer was moved.
      I removed the screws holding the Elbow in place. Removed the broken pieces and replaced them with the new part. Maytag gives great access to the back of the washer so I could easily bring the part into position to replace the screws that hold it. Worked like a champ!
      • Bud from Clyde Hill, WA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Screw drivers
      • Parts Used:
        208847
      4 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Siphon hose joint kit
      You may want to use a lite silicone sealer to eliminate any water leaks at hose clamp but you can get away without it.
      • john from SACRAMENTO, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Pliers, Screw drivers, Socket set
      • Parts Used:
        208847
      3 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      I broke the syphon break elbow pulling the washing machine out from the wall
      First I removed the 4 screws holding the old elbow in place. Then I removed the screw holding the cover over the upper access hole on the below the syphon break elbow. I reached up through the access hole and removed the old elbow from the inside. I slid the new elbow up through the hole, aligned it with the housing plate and then screwed the screws back in to hold it in place. I had to cut about 3" off my old drain hose, because the outside diameter of the old syphon break elbow was about 1/16" larger and had stretched the end of the hose too much to fit tightly on the new elbow. I then attached the drain hose to the new elbow and tightened the hose clamp and reinserted the hose into the drain and pushed the washer back into place. (I used the old hose clamp rather than the one included with the new elbow because it still worked fine and looked sturdier than the enclosed one.)
      • JANET from CAMPBELL, CA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Wrench set
      • Parts Used:
        208847
      2 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Broken drive belt and cracked elbow connector for water drainage
      Unplugged the power chord, disconnect the water lines and the drainage hose connected to the elbow. Created and cleaned a space to work, opened the top cover and the front panel to be able access to the elbow area to replace it with a new part, placed back the top cover and front panel. Installing the new drive belt at the bottom was surprisingly easy.
      • Francisco from San Jose, CA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Screw drivers, Socket set, Wrench set
      • Parts Used:
        12112425, 208847
      2 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Part replacement and hookup
      My wife got the washer for free but the elbow where the water is released got snapped off when it was removed from its previous location. I looked up the schematics online, ordered the part, and it came a day and a half later. The installation video on the PartSelect.com website was perfect. I followed it step-by-step and installed the part in just a few minutes. The hardest part was hooking up the washer without leaks. Everything went great and I will definitely use the service again when needed. Best part? My wife is happy.
      • George from RESEDA, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Pliers
      • Parts Used:
        208847
      1 person found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      When moving the washer to install new hoses the elbow for the waste water snapped.
      I removed the two screws holding the front panel and lifted out of the way. I then removed the front two bolts holding the top to the frame. I slid the top forward providing access to the interior. I then removed the four screws holding the discharge unit against the back panel. I removed the broken elbow and installed the new one. I reversed the removal procedure and installed the discharge hose to the new elbow. (Note: the new elbow was slightly smaller at the discharge end than the old one. The discharge hose had a larger inside diameter than the elbow. Probably due to the age of the machine). I will pay attention to the discharge hose if I have to move the washer again.
      • Russell from Cranberry Township, PA
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers, Socket set
      • Parts Used:
        208847
      1 person found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      5 Reviews
      4.6
      Filter By Rating:
      • 5 Stars
        3
      • 4 Stars
        2
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS2017573
          Manufacturer Part Number: 208847
          Brand
          Model Number
          Description
          Kenmore
          106T14FL
          Refrigerator - COLDSPOT REFRIGERATORS
          Maytag
          A104
          Washer - Top Loading
          Maytag
          A105
          Washer - Top Loading
          Maytag
          A110
          Washer - Top Loading
          Maytag
          A112
          Washer - Top Loading
          Maytag
          A180
          Washer - Top Loading
          Maytag
          A181
          Washer - Top Loading
          Maytag
          A182
          Washer - Top Loading
          Maytag
          A183
          Washer - Top Loading
          Maytag
          A190
          Washer - Top Loading
          Maytag
          A1910
          Washer - Top Loading
          Maytag
          A209
          Washer - Top Loading
          Maytag
          A209S
          Washer - Top Loading
          Maytag
          A210
          Washer - Top Loading
          Maytag
          A210S
          Washer - Residential
          Maytag
          A211
          Washer - Top Loading
          Maytag
          A211S
          Washer - Top Loading
          Maytag
          A212
          Washer - Top Loading
          Maytag
          A212S
          Washer - Residential
          Maytag
          A282
          Washer - Top Loading
          Maytag
          A283
          Washer - Top Loading
          Maytag
          A284
          Washer - Top Loading
          Maytag
          A305
          Washer - Top Loading
          Maytag
          A310
          Washer - Top Loading
          Maytag
          A310S
          Washer - Residential
          Maytag
          A312
          Washer - Top Loading
          Maytag
          A312S
          Washer - Residential
          Maytag
          A382
          Washer - Top Loading
          Maytag
          A390
          Washer - Top Loading
          Maytag
          A3910
          Washer - Top Loading

          Get in touch, we're here to help!

          Open until 10PM EST

          Contact Customer Service