Surface Burners Spark Module Kit 1430322 | Official Whirlpool Part | Fast Shipping | PartSelect
Surface Burners Spark Module Kit – Part Number: 1430322
Surface Burners Spark Module Kit – Part Number: 1430322 Surface Burners Spark Module Kit – Part Number: 1430322 Surface Burners Spark Module Kit – Part Number: 1430322 Surface Burners Spark Module Kit – Part Number: 1430322 https://partselectcom.azureedge.net/Schematics/Maytag/45160.gif

Surface Burners Spark Module Kit

Product Description

Surface Burners Spark Module Kit Specifications

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Will Not Start | Gas igniter glows, but will not light

This part works with the following products:

Range, Cooktop, Microwave Oven Combo, Wall Oven.

This part works with the following brands:

Magic Chef, Caloric, Amana, Maytag, Hardwick, Admiral, Jenn-Air, Crosley, Norge, Kenmore, Litton, Whirlpool.

Part # 1430322 replaces these:

0052269, 0066564, 0302477, 0306035, 0311627, 1430322, 1522102, 1522106, 3039, 306035, 311627, 359-219, 359-243, 359-245, 359-246, 359-251, 359-259, 359-281, 551005, 561084... Show More
Questions and Answers
Ask our experts a question on this part and we'll respond as soon as we can.
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 5 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
nicholas from livermore, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
1430322
gas burners and gas oven would not light
unplug the oven and pull it away from the wall. looking at the oven from the back, the spark module is at the bottom on the lower left. there is a two piece sheetmetal cover over the area of the spark module. use a phillips head screwdriver to remove five screws and the covers come off. the spark module is the blue cube with four push on wire connectors. all you have to do is hold the new one next to the old one and swap one wire at a time. both were clearly marked with identical numbers and letters. really nothing to it. it took me longer to clean the back of the oven than to replace the module. the old module was eaton part number Y-54052-3. the new one is eaton part number Y-054052-34.
13 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Adrienne from Lake Havasu City, AZ
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
1430322
The range burners would not catch a spark and ignite. They would just keep clicking with no ignition.
I had an appliance repair rep do the replacement. He made it look relatively easy.
The repair man first turned off the breaker to the range and confirmed there was no power to the range.
After lifting off the range top cover exposing the burner igniters, he unhooked and removed the igniters. He opened the lower oven door exposing the screws which hold the front knob plate in position. He took those out. After loosening the knob plate he was able to unscrew and raise the inside cover which exposes the wires and the spark module.
My spark module was located in the front left corner area tucked a little under the knob plate. That is another reason why he had to loosen the plate. The replacement part was a universal part so he had to do a little work on the wire connectors but it only took a couple of minutes. Once he configured the wire ends, he was able to plug in the new spark module and put the top back together again.
The repair man knew exactly what to do and made it look relatively easy. I did not want to tackle this problem because I did not know exactly where the spark module was since some models have them in the back of the oven and the oven has to come out from the wall. Also, the wire connections had to be worked with a little and he knew exactly how to do that.
The repair man took about 45 minutes from beginning to end with most of that time spent getting to the part and putting it back together. The replacement itself took only about 10 minutes.
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
James from Gorham, ME
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
1430322
Surface burners would not light
None of the surface burners (two Uni-burners) would light without using a match. I first ordered two replacement PS2089818 top burner spark electrodes. I replace one which was very easy - the electrode just clips into the burner - and I traced the wires down to the back bottom of the stove where I found they plugged into an ignition module. The new electrode didn't help, but since all four burners were out it made sense that the ignition module would be the problem and not the two separate electrodes. So I ordered a new ignition module. It plugged in easily with the terminals well marked like the original. I put the original electrode back in and all four burners now light properly with the desired "tic tic tic" sound with the knobs in the "high/light" position.
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Steve from Sedona, AZ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
1430322
Igniters did not spark
Unplug and pull range away from wall.
Remove metal panel from back of range by using nutdriver to remove 4 screws.
Use phillips scewdriver to remove 2 screws holding old spark module.
Unplug 4 wires from spark module and note placement of wires for reinstall.
Install new module by reversing procedure.
Slide range back against wall and plug in.

Entire process took less than 30 minutes.

NOTE: Spark Module received from partselect.com did not match old part exactly. The screw holes on the new part did not line up with screw holes from old part. I reinstalled new part with just 1 screw. Was told by partselect customer service that the part I received had been substituted and would work fine. It does work but it did not fit correctly.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Robert from St. Remy, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
1430322
Burners would not light sometimes
Slide stove out unplug remove cover on back bottom left 3 screws remove wires from old module and plug into new module could not remove old module I glued new to old replaced cover pluged back in slide stove back in and the burners lit
1 person found this instruction helpful.
Was this instruction helpful to you?
Model Cross Reference

This part works with the following models:

PartSelect Number: PS2011188
Manufacturer Part Number: 1430322
Brand
Model Number
Description
Admiral
1088AF-CKZ
Range - Freestanding, Gas
Admiral
1088WF-CKZ
Range - Freestanding, Gas
Magic Chef
1100PAW-K
Range - Freestanding, Gas
Magic Chef
1100PAW-KL
Range - Freestanding, Gas
Magic Chef
1100PRA-K
Range - Freestanding, Gas
Magic Chef
1100PRW-K
Range - Freestanding, Gas
Magic Chef
1111WAW
Range - Freestanding, Gas
Magic Chef
1111WAW-L
Range - Freestanding, Gas
Magic Chef
1111WRA
Range - Freestanding, Gas
Magic Chef
1111WRW
Range - Freestanding, Gas
Admiral
1171AH-30K
Cooktop - Freestanding, Gas
Admiral
1171AJ-30K
Cooktop - Freestanding, Gas
Admiral
1171AL-30K
Cooktop - Freestanding, Gas
Admiral
1171WH-30K
Cooktop - Freestanding, Gas
Admiral
1171WJ-30K
Cooktop - Freestanding, Gas
Admiral
1171WL-30K
Cooktop - Freestanding, Gas
Admiral
1172AJ-30K
Cooktop - Freestanding, Gas
Admiral
1172WJ-30K
Cooktop - Freestanding, Gas
Maytag
11EA-1KW
Range - Maytag Range/Stove/Oven Model 11EA-1KW (11EA1KW, 11EA 1KW) Parts
Magic Chef
11JA-10
Range - Gas
Magic Chef
11JA-10K
Range - Gas
Magic Chef
11JA-1KW
Range - Gas
Magic Chef
11JA-2KW
Range - Gas
Magic Chef
11JK-10
Range - Gas
Magic Chef
11JK-10K
Range - Gas
Magic Chef
11JK-1KW
Range - Gas
Magic Chef
11JK-2KW
Range - Gas
Magic Chef
11JN-10
Range - Gas
Magic Chef
11JN-10K
Range - Gas
Magic Chef
11JN-1KW
Range - Gas