2004037-2-M-Whirlpool-12002750-Rear Convertible Tine Kit
Part Location Diagram of 12002750 Whirlpool Rear Convertible Tine Kit
See part 13 in the diagram
( Grid squares measure 1x1 inch )
2004037-1-S-Whirlpool-12002750-Rear Convertible Tine Kit 2004037-2-S-Whirlpool-12002750-Rear Convertible Tine Kit 2004037-3-S-Whirlpool-12002750-Rear Convertible Tine Kit Part Location Diagram of 12002750 Whirlpool Rear Convertible Tine Kit
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Rear Convertible Tine Kit 12002750

★★★★★
★★★★★
3 Reviews

Rated by 4 customers 

Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 105.98
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS2004037
Manufacturer Part Number 12002750
Manufactured by Whirlpool
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
Maytag, Amana.
Part# 12002750 replaces these:
AP4010256, 1174058, 12002750, 99002685, 99002686, 99002717, 99002718
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.7
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Carol C - January 10, 2019
  Verified Purchase
Great service
Good experience. Easy to order, came on time. Easy install. One more thing on my list of ( things to do) checked off.
★★★★★
★★★★★
Noelle C - November 10, 2018
  Verified Purchase
Easy
They don’t quite fit as well as the old ones—they don’t lay flat when turned for smaller dishes but easy to put in and serve their purpose.
★★★★★
★★★★★
Timothy B - September 23, 2018
  Verified Purchase
The operator was patient and helpful
It took a long time to get the parts but they were on backorder and I knew that it was going to be a while
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.3 / 5.0, 4 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
rusted, broken tines
snapped old tines out of plastic guides, snapped new tines in place. Done.
  • Kristine from SEBEWAING, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The front set of convertible tines had begun to rust.
Snapped the old, rusting, tines out of the clips and snapped the new, not yet rusting, tines in. Although the kit includes both sets of tines and replacement clips, I only replaced the one part.
  • Steven from Abingdon, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The vinyl coating on the forward rack of convertible tines dried and cracked away, allowing the steel underneath to rust and deteriorate. It eventually just broke.
After looking the situation over, I decided to remove the entire lower rack and place it on the counter where I could see better. I specified I needed the front tine (part # 24), but received both front and back tines). I used the screwdriver to help slip the old piece out of the plastic clamp end. I broke the end of the first clamp, but fortunately, replacement clamps were also included in the kit. I decided it would be easier to assemble the tines and the clamps first, and then install that into the rack, so I had to remove the other plastic clamp and did so successfully. Then holding the assemblage in place to see just where to snap it into place, I proceeded one clamp at a time and installed it. I kept the new back tine guide just in case someday that one wears out too.
Read less
  • Donna from Grand Ledge, MI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
20 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tines were rusting
I pulled the set of tines that hold the plates off the clips that hold them and pushed the new set into the clips. It was done!
  • Patricia from Nebraska City, NE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Front Convertible Tine
$51.59
$51.59
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2004037
Manufacturer Part Number: 12002750
Brand
Model Number
Description
Amana
ADB2200AWB
Dishwasher
Amana
ADB2200AWQ
Dishwasher
Amana
ADB2200AWS
Dishwasher
Amana
ADB2200AWW
Dishwasher
Maytag
MDB6601AWB
Dishwasher
Maytag
MDB6601AWQ
Dishwasher
Maytag
MDB6601AWS
Dishwasher
Maytag
MDB6601AWW
Dishwasher
Maytag
MDB7600AWB
Dishwasher
Maytag
MDB7600AWQ
Dishwasher
Maytag
MDB7600AWS
Dishwasher
Maytag
MDB7600AWW
Dishwasher
Maytag
MDB7601AWB
Dishwasher
Maytag
MDB7601AWQ
Dishwasher
Maytag
MDB7601AWS
Dishwasher
Maytag
MDB7601AWW
Dishwasher
Maytag
MDB7650AWB
Dishwasher
Maytag
MDB7650AWQ
Dishwasher
Maytag
MDB7650AWS
Dishwasher
Maytag
MDB7650AWW
Dishwasher
Maytag
MDB8750AWB
Dishwasher
Maytag
MDB8750AWQ
Dishwasher
Maytag
MDB8750AWS
Dishwasher
Maytag
MDB8750AWW
Dishwasher
Maytag
MDBF750AWB
Dishwasher
Maytag
MDBF750AWQ
Dishwasher
Maytag
MDBF750AWS
Dishwasher
Maytag
MDBF750AWW
Dishwasher
Maytag
MDBH750AWB
Dishwasher - Tall Tub
Maytag
MDBH750AWQ
Dishwasher - Tall Tub
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Rear Convertible Tine Kit
$ 105.98
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.