Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Charles M - June 30, 2020
Verified Purchase
Moter replacement
Received the motor in a few days, installed and it work fine. Very pleased
★★★★★
★★★★★
Daniel W - March 28, 2020
Verified Purchase
Maytag washer motor
The sales woman was very knowledgeable and very pleasant. Ordered the right part with no problems. Great company. Order came next day.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer motor start windings burned up
The motor was easy to replace: unplug the wiring harness, slip off the belts, release the tension springs from the motor carriage with needle-nose pliers, and then unbolt the motor carriage with socket set and remove from the washer. Remove the pulley from the old motor with allen wrench and transfer the carriage to the new motor. Revers
... Read moree operation for everything and you are back in business. The hardest part was the far back screw holding the carriage, a wobble extension helped.
Read less
Eric from Seabeck, WA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
36 of 47 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
motor went out
simply removed old motor and replaced with new
jeff from shepherd, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
14 of 37 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lou
March 6, 2018
Washer tries to spin and pump out water but motor kicks out .Gets hot smells .Will not restart till cool. Is motor bad?
For model number LAT5000AAW
Hi Lou, Thank you for the question. Sounds like the motor is defective and will need to be replaced, PartSelect Number PS2003768. Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
January 23, 2019
Washer fills then don’t agitate unless i help by spinning the belt slightly then the same thing between each cycle. No burnt smell, just humming until i help start it. Could it be the motor switch?
For model number Lat7304aam
Hello Jim, thank you for your question. If the belt is tight and the pulley is moving after you give the belt a push and does not seem like its seizing up, the motor should be replaced. The switch/capacitor sounds bad on that motor. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Frank
April 17, 2019
Washing machine motor makes a loud banging noise as it slides toward the drum. This happens at the beginning while it’s gaining speed in spin cycle. I also noticed a light surging nearby as the noise is made. Do I need to replace motor?
For model number A482
Hello Frank, thank you for inquiring. For this symptom you will want to replace either the Belt Kit part PS2005284, the Tub Bearing Kit part PS2347235, or the Rear Bearing part PS11739437. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ken
January 27, 2023
Does the new motor come with wiring adapter for older machines
For model number A209
Hello Ken, Thank you for writing. The Motor will come with the Jumper Kit required. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Frank
April 4, 2023
So my motor had burning smell and not spinning (draining works fine). I found out that the belt for spinning was broken. After I replaced the belt the spinning worked again but then not draining… And then I saw the motor burned out with smoke.. I’m planning to replace the motor with this one, just want to ask if anything else I need to replace before place order. Also this is the correct one right? For Maytag A512. Thanks!
For model number Maytag A512
Hello Frank, thank you for contacting us. The drive motor, you mentioned, is the correct part for your model. We would recommend checking the drain pump, part number PS11743017, for the draining issue. We hope this information helps!
Our drier is making loud noises when first starting. And the last time I ran it, it smelled like something was burning. We replaced the rollers and belt with no luck before the burning smell and now are wondering if the motor is the issue. Thanks for your advice!!!
For model number LDE5916ACE Maytag Drier
Hi Katie, thank you for reaching out. According to our research and considering the symptoms you mentioned, the issue seems to be with the drive motor, part number PS3500893. Over time, the bearings inside the drive motor get partially jammed. This makes the drive motor use more energy for rotating the dryer tub, causing the windings to overheat and might cause a burning smell and noise. We hope this helps, good luck with this repair!
My washer stopped spinning and made a buzzing sound. Then I smelled burning. Replaced the motor(43 years old). doing the same thing(buzzing sound). I am at a loss.
For model number A105 top load washer
Hi Matthew, thank you for your question. A burning smell coming from the washing machine during or after the spin cycle indicates the possible stuck drain pump in which its pump motor would not turn. With that, it may generate a burning smell. We would recommend checking the following parts to fix the issue: belt kit, part number PS2005284, glide and spring kit, part number PS2017149, tub bearing kit, part number PS2347235, and drain pump, part number PS11743017. We hope this information is useful!
Hi, My machine made a high pitched squeal during a cycle and then smoke came out. Unplugged machine. Unloaded the washer and was able to turn to spin cycle to drain the water. The machine is no longer smoking but will not agitate. It will fill and spin but not agitate. What can be done to fix this issue?
For model number LA512
Hello Renee, Thank you for the question. We suggest checking both Belts to make sure they are not damaged or broken. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
