Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This kit includes the ice maker, power cord, bail arm, and fill cup. If your ice maker is not making or dispensing ice, or you notice a leak, you may need to replace the rear-mount ice maker assembly. This ice maker mounts to the back panel in the freezer section of the side-by-side refrigerator. If you are having an issue with the arm of this kit hitting the shelf, you will have to replace the shelf. You can find the shelf by searching PS1152582. To complete this repair, you will need a 1/4-inch nut driver and a small flat blade screwdriver.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jeffrey S - July 19, 2018
Verified Purchase
Easy repair, just unplug, take out 2 screws replace with new and you have ice.
Part come fast and exact fit. No problems.
★★★★★
★★★★★
Joe L - March 25, 2021
Verified Purchase
Ice maker replacement
The replacement part needed was easy to find on website with model number. Part was shipped in a timely fashion which was much appreciated. The ice maker was a perfect replacement for my refrigerator and very easy to install myself. I will be back to order my next project part!
★★★★★
★★★★★
Fred G - August 31, 2018
Verified Purchase
Rear-Mount Ice Maker Replacement.
The replacement part was an exact duplicate. The internet instructions and the instructions that came with the part were easy to follow. As the internet instruction noted the replacement was easy and it didn't take more that 15 minutes. My cost was just for the part and shipping, no service call cost. I would not hesitate to purchase replacement parts from PartSelect in the future. A great experience with them.
★★★★★
★★★★★
Sara H - May 30, 2019
Verified Purchase
Quick and easy
Perfect fit went work immediately making ice.
★★★★★
★★★★★
MICHAEL F - November 8, 2020
Verified Purchase
Easy repair
The part worked as expected, speedy delivery and easy install .
★★★★★
★★★★★
Ken L - October 3, 2018
Verified Purchase
Part fit great
Part fit great, easy to install. But the delivery took longer than expected. 3 to 5 days took 8. Only issue I had
★★★★★
★★★★★
David S - October 8, 2020
Verified Purchase
It was perfect. Ice maker replaced.
The product matched exactly as the mfg part number. It works perfect and now we have plenty of ice.
★★★★★
★★★★★
Thomas J L - November 1, 2023
Verified Purchase
Beach House Repair
Easy install & stopped pesty leaking.
★★★★★
★★★★★
Jim G - April 25, 2020
Verified Purchase
Easiest home project.
The Ice Maker is probably the easiest home project I ever replaced myself! I would admit that I was a little afraid of this project having never replace an inside part in the refrigerator. From start to finish it took less than five minutes to replace! Remove two screws, & unplug connector, then install new part, and I was back in business, making some good points with my wife!
★★★★★
★★★★★
Rickey M - February 10, 2021
Verified Purchase
Easy repair. Part was an exact match
The part was new. Delivered on time. Worked great the first time
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 19 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The icemaker was making a clicking noise. The paddle that moves to let the ice drop into the ice container had trouble moving the new ice so it could retract.
This was one of the easiest repairs I ever did. All that is needed is a nut driver. Turn off the freezer. Remove the ice container. The two screws that hold the ice maker only have to be loosened since the mounting holes are keyhole shaped. Loosen the screws, slide the icemaker up, unplug it, and remove it. Plug the new one in, place it o
... Read morever the scews, drop it in place and tighten the screws. Replace the ice container. Turn on the freezer. Turn on the ice maker, run it through a cycle, and job is complete. Took about five minutes, start to finish. The water doesn't have to be turned off since there is no direct connection to the ice maker.
Read less
David from Lehman, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced Ice Maker
Unplugged refrigerator from the wall plug. Removed ice tray cover, removed ice container, lossen the two screws on the ice marker holding it to the back of the fridge, dropped the ice marker down and unplugged the electrical connection. Then removed the ice maker. Took the new ice marker, plugged the electrical connection back into t
... Read morehe back of the new ice marker, screwed the two screws back in where the ice marker goes and tighen the screws to told the ice marker in place. Replaced the ice container, replaced the ice cover. Plugged the fridge electrical cord back in to the wall socket. Done. It started making ice again in about 10 minutes.
Read less
Robert from Franklin, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unit Would No Longer Eject Ice Cubes
Holding down the power button for 15 seconds would no longer advance the ice maker, so apparently the motor had burned out. I removed the two screws at the back of the unit and unplugged it. Plugged the new one in, replaced the two screws and turned the power on. Simple as that! Started producing ice a short time later.
John from BROWNSBURG, IN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Remove the previous ice maker and install the new one
The repair was fairly straightforward now that we realized the ICE CREAM SHELF also needed to be replaced. It is strongly advised that your instruction as to that fact should be in bold, ALL CAPS, or a different-colored type. I believe this is the 3rd time we have ordered the ice maker from you and we HOPE that you have appropriately re
... Read morefunded our account for the one that you received back on 1/27/21.
JUST CONNECTED THE WIRE HARNESS, TIGHTEN THE TWO NUTS WITH AN NUT DRIVER AND TURNED IT ON. WORKS GREAT!
Robert from JACKSON, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker knot making ice
Very simple less then five minutes.
John from KANE, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker over flowed
The ice maker would over floew then not cycle it would freeze with the forks stuck in the ice! so just get your modle # and serl, # call in and order the hole ice maker it cost only about $120.00 with shipping!! it is so simple to put in just lossen the 2 1/4 screws in the back and lift up then unplug it. you do not have to turn the water
... Read more off as it works off the pump at the bottem !!( note you nedd to take the ice bucket out it just slides right out !! You will save the service call from A repair man it is really very easy so by the time it took to read this you will have it done !really its that easy!!
Read less
Thomas from Belton, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
14 of 16 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker shorted out
love this super easy remove two screws and replace thank you
ALAN from SARATOGA, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
5 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker quit working & was over flowing
We had to unhook & remove icemaker several times, thaw it out & reinstall, it would work for a day or two then overflow. Bought the new ice marker, replace it and it works great....
kenneth from lincoln, NE
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
7 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice tray wouldent fill.
It was simple. I loosened the two screws holding the ice maker unit. Then disconnected the wire harness. Plug in the new ice maker and tighten down the two screws. Held reset button for 15 sec. Done! took ten min. I had a full try of ice the next day!
Eric from Greensburg, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
37 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Zach
April 9, 2018
My ice maker does not stop making ice and won’t shut off. Would replacing the whole ice maker assembly solve this problem or is there an easier fix? Thank you
For model number PLHS69EESSN
Hello Zach, thank you for your question. If the ice maker continues to make ice non stop the best thing to do is replace the whole ice maker assembly, part number 5303918344. The old ice maker can be unplugged, the screws that hold it into place removed and the unit taken out of the freezer. The new ice maker is mounted into place and plugged in. Its a very easy repair, and takes little time. It can take 24 hours for the new ice maker to start making ice, so be patient if it doesn't make ice right away! I hope this helps!
12 people found this helpful.
Was this helpful?
Thank you for voting!
Albert
March 29, 2018
Water is dripping and puddling on the floor on the left bottom of the freezer side door. Upon inspection i found a sheet of ice formed under the bottom drawer on the freezer side. It appears to then leak out the bottom onto the floor. Where is this water coming from and freezing under the bottom drawer, and what are the possible repairs?
For model number FPHS2699KF0
Hi Albert,
Thank you for your question. There could be a number of things that are leaking in your appliance. I would suggest taking a look at your ice maker first, just make sure there are no breaks or the part is not over filling with water and causing the leak. You may also want to look at the fill tube/cup that pours the water into the ice maker mold. Another thing that you could check is your defrost thermostat and heater. It might be that your freezer section is defrosting a bit too much and the water is just pooling at the bottom there. You may also want to check the drain in your freezer, make sure that it is not iced over and blocking the water from draining out of the freezer during the defrost cycle. I hope that helps. Good luck with your repair.
8 people found this helpful.
Was this helpful?
Thank you for voting!
Khosrow
July 16, 2019
After being away for 10 days with the refrigerator being on, but the water supply being shut off to the refrigerator for that time, the ice maker does not work. However, the drinking water supply from the refrigerator is now resumed with sufficient and normal pressure. Should we replace the ice maker unit or do something else first?
For model number PLHS39EESS2
Hi Khosrow,
Thank you for your question. If the refrigerator has been off for a period of time and it has just recently been turned on, It can take 24 hours before the ice maker starts working again. If it has been longer than 24 hours since the refrigerator has been turned on, you will need to check the water inlet valve, the water filter and the ice maker. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Ben
February 26, 2018
My ice maker is not dispensing the ice. The part that that auger attaches to in the rear of my freezer is making noise, but it is not spinning. Do I need to replace the rear mount ice maker assembly?
For model number PLHS68EESB1
Hi Ben, Thank you for the question. If the icemaker is making ice but not dispensing then the icemaker is good. If the auger is not Turing the issue is within the ice container. Soudns like an issue with the Auger Motor, Part Number: PS1993164. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
March 4, 2018
The ice maker is not making ice .
For model number LGHC2342LF0
Hi Bill,
Thank you for your question. There are two parts that you will need to look at. I would suggest first checking your water in let valve. Even if the water dispenser is working, the ice maker solenoid could be malfunctioning on the valve. Test it with a multi meter to check. The other part that you should check would be your ice maker itself. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
November 19, 2019
2 issues. Our fridge makes ice but does not dispense it when we push the trigger in. Motor doesn't turn and ice does not dispense. A separate issue is the water line within the fridge door freezes. We unplug the fridge for two days so that the ice in line melts. Two days later it is frozen again.
For model number EI23CS55GS1
Hello Paul and thanks for writing.
1 st issue. Sounds like your auger motor is defective and your ice maker needs to be replaced. Doing so might fix your other issue of the line freezing.
2nd issue: A refrigerator ice maker that freezes up can be caused by a frozen ice maker fill tube, faulty water inlet valve, too low freezer temperature setting, or a water filter that needs replacing. First, locate the water supply to your ice maker and turn off the water supply via the shut off valve.
We hope this helps. Please contact us anytime. Good Luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Gina
February 28, 2019
Just want to make sure the correct part to replace my ice maker is 5303918344. Already replaced water inlet valve and that wasn’t the problem. Thank you
For model number Fghc2342lf3
Hello Gina, Thank you for contacting us! I have researched the model you have provided and have found the part you are looking for is PS12364147. Have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Khosrow
July 15, 2019
After being away for 10 days and the water supply being shut off to the refrigerator for that time, the ice maker does not work. However, the drinking water supply from the refrigerator is now resumed with sufficient and normal pressure. Should we replace the ice maker unit or do something else first?
For model number PLHS39EESS2
Hi Khosrow,
Thank you for your question. If you have had the refrigerator off for a period of time and you have just plugged it back in, you will need to allow 24 hours for the ice maker to start making ice again. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Pete
October 16, 2021
Many problems....Unit does not make ice. Temp readout all over the place so I replaced the thermostat on the freezer dept. Pulled panel off and was covered with ice. Thought thermostat solved problem, but fridge runs all the time, temp readout varies. Freezer too warm for ice cream. Strangley, control does not light up unless freezer door is opened, but when you depress switch on fridge door, unit goes off. Thinking I need new control module????
For model number ffss26d8rs0
Hello Pete, thank you for your question. If your freezer is not maintaining a temperature between 0 and 5-degrees Fahrenheit (-18 to -15C) it will not make ice. There are a few things that could cause your refrigerator to run all the time and cause temperature issues. To test your defrost thermostat, place it in ice cold water for 2-3 minutes after removing it from your appliance. It should be reading 0 ohms to be working correctly. Part number: PS469522. Check your defrost heater, part number: PS2581596. Remove it from the appliance. It should be reading anywhere between 0 - 50 ohms to be working. Check your evaporator fan motor. Make sure it is not clogged with ice and that the shaft turns freely. You can also test with a multimeter. Touch one of the tester leads to one terminal and the other lead to the other terminal. If you get a very high or infinite resistance reading (which is denoted by OL on a digital meter), there's a break somewhere, meaning the coil is bad and the fan needs to be replaced. Part number PS12729077. Check your freezer door gasket to make sure it is sealing properly. Part number PS1991325. If all these parts are good, we would suggest replacing the condenser fan. Part number PS12728810. We hope this helps!
The icemaker is no longer producing ice, the manual over ride does not work. Filled itself fine with water and froze ok and nothing functioned since. Turned off, tried 20 seconds on over ride, nothing. Have already replaced the inlet valve, is the ice maker shot? Correct icemaker part # is 5303918344?
For model number FGHS2355PF2
Hello Tami, thank you for your question. Yes, that issue would be with the icemaker. The icemaker for that unit is PartSelect Number PS12364147. I hope this helps.
