Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Roger S - August 4, 2022
Verified Purchase
East repair, correct part.
Easy to replace. Works great
★★★★★
★★★★★
Derek F - October 15, 2019
Verified Purchase
Easy repair, two wires, two screws and back up and running
The part came in quickly and was easy to replace
★★★★★
★★★★★
Travis P - March 28, 2019
Verified Purchase
Over 2 weeks to get part
Took a very long time to get part. Bought a toaster oven during the time it took.
★★★★★
★★★★★
Charlotte B - March 18, 2019
Verified Purchase
Easy repair!
The part came just as pictured, and installation was a breeze, once we removed the old rusty bolts. Delivery took a little longer than expected, but I went so long without an oven, that I didn't mind. Thank you so much, now I can bake again!!!!
★★★★★
★★★★★
Jerry T - February 23, 2019
Verified Purchase
Great
A very easy fix and stove is working great again
★★★★★
★★★★★
John B - January 1, 2019
Verified Purchase
Oven element
Easy repair. Was able to swap out element in 15 min.
★★★★★
★★★★★
Emily W - December 28, 2018
Verified Purchase
Excellent experience!
It was very easy to find the correct part on the website, it was delivered on time, and was easy to install! Awesome!!
★★★★★
★★★★★
Nicholas L - December 20, 2018
Verified Purchase
10 minute repair
Part arrived in good condition despite flimsy packaging. Installation simple but required a little force with needlenose pliars to re-install leads on element spade connectors. Overall satisfaction with service.
★★★★★
★★★★★
Charles C - October 13, 2018
Verified Purchase
Worked as expected. Glad to have my oven working again.
Part came in a few days, part connected in a few minutes. My old part died and had curled and was disfigured. Bottom oven element has a cover over it so you couldn't see the element until repairs were needed and cover was taken out.
★★★★★
★★★★★
Jerry D - May 28, 2018
Verified Purchase
Part worked . Packaging was bad.
Part was what we ordered . Works great . Came in large box with no packing material. Half of taping was off box . Part of element was sticking out of box . But thankful it works .
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Baking element got fried and turned into a pretzel with a crack in one loop
Cut power to your oven in your circuit breaker panel Take out racks and bottom pan from the oven Remove 2 screws in element bracket at back of oven Lift element gently, tilt upward and pull towards you out of insulation Get the tilted wire connectors clear of the back panel Remove two wires from from connectors ge
... Read morently with your fingers Take bad element out of oven Replace it with new element Replace everything else Piece of cake. 20 minutes max: remove old; plug and play.
Read less
Edward D from GRAND BLANC, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element burnt out
Tool old elentment out, put new element in
glyndon from BOWLING GREEN, KY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element burned up.
Removed old element and plugged in new. Very simple.
Lynn from Denton, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
50 of 75 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
October 28, 2017
Bake doesnt get above 175 even when set at 350: Power is working, broil working----do you have thoughts on what i should be checking? Thank you
For model number ples399ecg
Hi Tom,
Thank you for your inquiry. There are some parts that you will need to check to see which one is causing the issue. You will need to check the temperature sensor, the main terminal block, the bake element and the broil element. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Tanner
November 30, 2019
Hello,
The oven does not reach temperature. when we set it on broil, the top element gets red hot. when we set it on bake, the lower element does not get hot. trying to find the correct element for this oven. thank you.
For model number PLES389ECI
Hello Tanner and thanks for writing.
Yes. Part Number: PS1992188 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Vandean
November 21, 2019
The oven has two heating elements the top gets hot, but the bottom element does not on bake , hi or lo setting, i inspected the element and dont see any cracks
For model number # 790.46783901
Hi Vandean, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your elements with a multi meter to see if they are working correctly or not. They should be reading between 0 - 50 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kelly
December 22, 2019
Very little bake heat and no broiler heat.
For model number E30EW75GPS4
Hi Kelly,
Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multi-meter. When testing the sensor with a multi-meter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If the oven sensor checks out, you will need to check the electronic control board, both the bake and the broil elements and the wiring between them to see what part may be causing the issue. We hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Naomi
December 13, 2017
It takes 40 minutes for the top oven to preheat & when it gets to the temperature it doesn't hold the temperature when you try to cook. Any suggestions?
For model number PLEB30T9FCC
Hi Naomi,
Thank you for your question. If the upper oven is not heating correctly, then you will need to check the temperature sensor, the wiring between the temperature sensor and the electronic control board, the electronic control board and the bake and broil elements. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sandra
September 19, 2019
The oven heats but takes a long time to get to selected temperature. When it does meet the selected temperature it doesn’t hold the temperature. Have to cancel and restart the process to bring it back up to required temperature. What part am i looking at?
For model number CGCS389FS3
Hello Sandra, thank you for inquiring. This sounds like a faulty Temperature Sensor, part number PS820208 for your model. You may also want to consider the Main Terminal Block, part number PS471605. Good luck with your repair!
Was this helpful?
Thank you for voting!
Gord
October 17, 2019
Is this the right model number for my fridgeaire stove oven ellament
For model number 316458436(0704)
Hello Gord, thank you for inquiring. This Bake Element is not shown as compatible to your range. The replacement Bake Element for your model range is part number PS438018. Good luck with your repair!
Was this helpful?
Thank you for voting!
Aaron
December 13, 2019
Lower element doesn't seem to be heating. Removed cover and element itself looks warped. The floor beneath the element looks warped/wavy, i would have expected the floor to be flat. Is the warped/wavy floor beneath the element something i need to worry about and replace?
For model number E30EW75EPS4
Hello Aaron, thank you for writing. We would suggest replacing it to prevent any further issues. The replacement for your model is Shield part number PS1528633. The replacement Bake Element for your model is this part number PS1992188. Good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
