Fresh Food Door Gasket - White 241786001

I looked at the internet before I purchased a new seal and saw how to repair it. It was a matter of pulling out the old seal and just popping in the new. The internet said to use a hair dryer to melt the rubber to adhere to the fridge in places where it wasn't. It was quick!

Door Gasket: Remove old door gasket by pulling out of the retaining channel. I started from the bottom and worked my way around the the door pushing into the retaining channel making sure there were no gaps and smoothing and pushing with my fingers making sure it was pushed all the way in the retaining channel.

Meat Drawer Rail Right Side: I removed the meat drawer from the shelf and then removed the shelf. I unscrewed the broken rail and replaced with the new rail with the old screw. Reinstalled the shelf and slid the meat drawer back into the shelf.

Easy Peasy

Took off old gasket and pressed in new one. Took about 5 minutes for both procedures. Vey Easy!

I just pulled the old gasket out , pressed the new one in with my thumb,and was finished. thank you, Langley

pulled old gasket out of groove in door. Put vaseline on slotted part of gasket that fits in groove of refri. door Put some vaseline on gasket surface that would be on the hinge side of door, so it would close with ease. Had no problems at all. Thanks

P.S. Sorry about not having the model No.
The Part No was PS1991324 Magnetic Gasket for Refr side of a Freezer/Refrigerator FRIGIDAIRE There are no screws to remove on this model. Just start at one corner and begin pulling old gasket out of the groove of the door.