GE/GE_Thumb/00122028i02.gif
See part 249 in the diagram
Replacing your General Electric Washer Motor and Drain Pump play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Motor and Drain Pump

★★★★★
★★★★★
13 Reviews
$ 266.45   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your WBVH6240F0WW!
 Fits your WBVH6240F0WW!
PartSelect Number PS1766031
Manufacturer Part Number WH23X10028
Manufactured by GE
Product Description

Motor and Drain Pump Specifications

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. This pump has sound isolation mounting washers and a filter.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not drain
This part works with the following products:
Washer.
This part works with the following products:
General Electric.
Part# WH23X10028 replaces these:
AP4324598, 1394137, WH23X10028, WH23X10026, WH23X10037
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

9 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Gerald
    October 4, 2017
    Washer is smoking during spin operation,and i am finding plastic pc's in the drain pump clean out was wondering 8f plastic pc's could be coming off the inside of the pump everything is working but something is smoking
    For model number Wcvh6400JOWW
    Hi Gerald, Thank you for your inquiry. If your washer is smoking during the spin cycle there are some parts that you will need to check to see which one is causing the issue. You will need to check the belt, the motor pulley, the drain pump, the direct drive motor coupling, the clutch assembly and the drive motor. Also if you have plastic pieces showing up in your pump it is likely that the drum bearing is worn out or the support for the basket is worn out causing the spin basket to wobble and rub into the front half of the outer tub and you will need to check this out. I hope this helps. Thank you and have a great day!

    6 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Mymy
    February 10, 2020
    My washer has stopped draining. I took it apart to see what the problem was and found that the propeller in the motor has broken off its metal pole. I dont want to have to buy a whole new motor because the rest is still working but i cannot seem to find this part for this specific model! Please help me!
    For model number WBVH5200J3WW
    Hello and thank you for writing. This part is not sold individually, you would have to replace the motor and drain pump assembly PS1766031. We hope this helps. Please contact us anytime if you require further assistance.

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Terri
    March 27, 2019
    Washer wouldn't drain found that shaft on side of drain pump had worked its way out - looking to find right drain pump motor (and assembly, i think). The part number is dp040-018. Can't seem to find these 2 numbers together for the same machine. Don't know whether to just look for drain pump for washer model number or look specifically for this part number?
    For model number WCVH6800J1WW
    Hello Terri, thank you for inquiring. For your model, this Motor and Drain Pump part PS1766031 is the replacement.

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Gerald
    October 5, 2017
    My washer started smoking ,thought it was the pump or berings i ran another load on hand wash and delicate it did not smoke on either setting so i am thinking weight in basket or another setting it smoked on the whites setting any advice you can give me would be great
    For model number WCVH6400J0WW
    Hi Gerald, Thank you for your inquiry. If yo have checked the pump and the bearings you may have to check the belt and the clutch. I hope this helps with the repair.

    Was this helpful?
    Thank you for voting!
    Satish
    February 4, 2018
    Hi, during the rinse cycle there is an unusual noise originating from the base of the machine. I opened the drain pump and removed some water but no objects came out. On one occasion i pressed the pump access door and the noise subsided. Could it be the drain pump that needs replacing?
    For model number WCVH6800J1WW
    Hello Satish, Thank you for your inquiry. Possibly, but I would also check the pump access shroud, pump service channel, pump access door and service panel that they attach to in order make sure those parts are not loose as if they were, they could be vibrating during the rinse cycle and causing the noise. You can test the motor and drain pump with a multimeter to see if it is functioning properly. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!

    Was this helpful?
    Thank you for voting!
    Kevin
    August 7, 2018
    Basket not turning during wash cycle but time keeps counting down.
    For model number WCVH6800J1MR
    Hello Kevin, thank you for writing. If the unit is not agitating, spinning, or draining you might want to check a few parts to see which has gone bad. You will want to check the lid switch, the drive belt and pulley, the motor and drain pump, and the electronic control board. I hope this helps!

    Was this helpful?
    Thank you for voting!
    Martin
    January 8, 2019
    My washer works well sometimes then others times it will leave the clothes wet like it did not spin fast enough
    For model number WCVH6800J0MS
    Hello Martin, Thank you for the question. I suggest checking the Belt, PartSelect Number PS1020114. It sounds like it might be slipping and could be wore out and need to be replaced. Hope this helps, good luck with this repair!

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Lisa
    July 31, 2019
    What is the replacement part for this washer for a drain pump motor? Ty!
    For model number WBVH6240F0WW
    Hi Lisa, thank you for your question. This part your are questioning under is the part that you are looking for according to your manufacturer and the model number provided. I hope that helps. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
    Holly
    April 2, 2022
    Our washer stops at the rinse cycle (20 mins left) and does not drain. I just replace the pump (per your excellent video) and it's still happening. Any tips?
    For model number WCVH6260HWW
    Hello Holly, Thank you for the question. This could be an indication the Cycle Timer Switch is not running trough all of the Cycles properly. The Timer for this model is built into the Washer Control Board so the Board would need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

    Was this helpful?
    Thank you for voting!
    Related Parts:
      Part Videos

      Replacing your General Electric Washer Motor and Drain Pump

      Replacing your General Electric Washer Motor and Drain Pump play video
      Customer Repair Stories
       Average Repair Rating: 4.6 / 5.0, 4 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Washing machine would cease functioning at the spin cycle and would not drain.
        Remove the front coverfrom the machine. This is done by removing the 3 screws at the bottom of the panel. The panel then drops down and pulls straight off. The pump is located on the front right wall of the of the machine. You will notice a 2-3 inch diamete threaded cap on the right side of the front wall of the machine. This is the front of the pump and access to the filter. Place a large bucket under this cap and slowly loosen the cap. All of the water remaining in the machine will begin to drain (this could be a lot of water. Do not remove the cap completely so that you can quickly stop the flow of water if needed). Once all water is drained from the appliance, Disconnect the two hoses from the pump using a pair of pliers to looses the presure clamps, sliding the clamps back an then pulling off the hoses (be careful of any remaining water in the hoses). Then remove the two screws from the rear base of the pump that secure it to the bottom floor panel of the washer. Slide the pump slightly to the rear to free it from the fittings on the front wall of the machine and the lift the pump up. At this point, firmly pull out the wiring harness plugged into the top right side of the pump. Install the new pump by plugging in the wiring harness and resecuring the pump. Plug in the machine and run on the rinse and spin cycle to test.
        • Trent from Shreveport, LA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Pliers, Screw drivers
        140 of 160 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        pump would not pump water out of washer
        I took the two drain hoses off with the pliers then only two screws that holds the pump. After that the two hot wires which are black and white. But remember to unplug you're washer since the pump is not grounded you don't want to risk being shocked. Hope thi helps. Plus i saved around 250.00 by repairing myself.
        • John from Farnham, VA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Pliers, Screw drivers
        75 of 99 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Would NOT drain
        Flipped washer on side
        Did repair from bottom
        Really easy repair
        • Nathaniel from HAWKINSVILLE, GA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Pliers, Screw drivers
        4 of 4 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Did not drain water
        Per ps video. Really easy. Disconnect power, Remove front lower panel, remove Power leads, 2 installation bolts, remove 2 spring clamps on feed/exit hoses,reinstall.
        • Chris from GREENVILLE, SC
        • Difficulty Level:
          Very Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Pliers, Socket set
        2 of 2 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          13 Reviews
          4.8
          Filter By Rating:
          • 5 Stars
            12
          • 4 Stars
            0
          • 3 Stars
            0
          • 2 Stars
            1
          • 1 Star
            0
          Sort by:
          Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS1766031
          Manufacturer Part Number: WH23X10028
          Brand
          Model Number
          Description
          General Electric
          GBVH5140H0WW
          Washer
          General Electric
          GBVH5140H1WW
          Washer
          General Electric
          GBVH5200J0WW
          Washer
          General Electric
          GBVH5200J1WW
          Washer
          General Electric
          GBVH5200J3WW
          Washer
          General Electric
          GBVH5200J4WW
          Washer
          General Electric
          GBVH5200K0WW
          Washer
          General Electric
          GBVH5300K0WW
          Washer
          General Electric
          GBVH6260F0GG
          Washer
          General Electric
          GBVH6260F0WW
          Washer
          General Electric
          GCVH6260F0GG
          Washer
          General Electric
          GCVH6260F0WW
          Washer
          General Electric
          GCVH6260H0WW
          Washer
          General Electric
          GCVH6260H1WW
          Washer
          General Electric
          GCVH6400J0WW
          Washer
          General Electric
          GCVH6400J1WW
          Washer
          General Electric
          GCVH6400J2WW
          Washer
          General Electric
          GCVH6500K0WW
          Washer
          General Electric
          GCVH6500K1WW
          Washer
          General Electric
          GCVH6600H0BB
          Washer
          General Electric
          GCVH6600H0GG
          Washer
          General Electric
          GCVH6600H0MB
          Washer
          General Electric
          GCVH6600H0MS
          Washer
          General Electric
          GCVH6600H0WW
          Washer
          General Electric
          GCVH6600H1BB
          Washer
          General Electric
          GCVH6600H1GG
          Washer
          General Electric
          GCVH6600H1MB
          Washer
          General Electric
          GCVH6600H1MS
          Washer
          General Electric
          GCVH6600H1WW
          Washer
          General Electric
          GCVH6800J0BB
          Washer

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service