Part Location Diagram of WH02X10265 GE Split Ring
See part 313 in the diagram
Replacing your General Electric Washer Split Ring
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Split Ring WH02X10265

 Fits your WBXR2060V0WW!
★★★★★
★★★★★
8 Reviews

Rated by 27 customers 

A Bit Difficult 

More than 2 hours 

Ratings submitted by customers like you who bought this part.

$ 14.40
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your WBXR2060V0WW!
PartSelect Number PS1766022
Manufacturer Part Number WH02X10265
Manufactured by GE for General Electric, Hotpoint
Product Description

Split Ring Specifications

This split ring is supplied by the original equipment manufacturer, and it is designed to secure the tub bearing in washing machines. It is a circular metal ring, with an outer diameter of 2 inches. The ring has a split or gap, which allows it to expand and contract for easy installation and removal. It is typically located on the inner side of the washing machine outer tub, where it provides stability and prevents the washer from excessively shaking during use. It is normal for the split ring to become worn, corroded, or damaged due to age, exposure to moisture, and excessive stress. A faulty split ring will lead to a noisy, unstable washer and eventually cause the tub assembly to fall out of alignment. Remove the washer panels to access the outer tub and split ring. Carefully detach the damaged split ring from the tub and position the new split ring in its place. Ensure that it is properly aligned and securely fastened before reattaching the panels.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Washer Split Ring

Replacing your General Electric Washer Split Ring
Troubleshooting
This part fixes the following symptoms:
Leaking | Will not agitate
This part works with the following products:
Washer.
Part# WH02X10265 replaces these:
AP4324356, 1394382, WH02X1195, WH2X1195
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
8 Reviews
5.0
Filter By Rating:
  • 5 Stars
    8
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 2.1 / 5.0, 27 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Water leaking in the floor occasionally with no obvious leaks anywhere
ORDER Spanner wrench for GE tub nut. Impossible to remove hub nut on a washer with age without it. Purchase 1 11/16 in spanner wrench, tub seal, hub nut , split nut
and washer under
agitator all at one time or you will struggle with this repair. The few cents you save is not worth it, the video they provide does a good job but theirs washer
is new hope this helps
Other Parts Used:
Tub Seal Split Ring Hub Washer
  • Greg from Shannon, GA
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hub washer replacement
I noticed a loud noise during the spin cycle, I purchased a bearing, but after taking the washer apart, I realized that the hub was worn out, I replaced the bearing and other parts to put it back in running condition, it was a worthwhile job, and cost saving. I have to thank partselect for the helpful videos.
Other Parts Used:
Tub Seal Split Ring Screw - 1/4-20 MCH HXW 5/8 S Inner Tub Base Hub Hub Washer Tub Bearing Washer Hub Nut V-Style Drive Belt
  • Dennis from NOBLESVILLE, IN
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Very loud noise during the rince cycle
Replaced the parts with the highest percentage of noise cause from your website. After replacement and reassembly, with the help from your very helpful instructional youtube and my son's assistance, the repairs did not get rid of the problem. Called and was instructed that it could be the mode shifter shaft assembly. Ordered that, as well as a new belt since I would need to disassemble again. Parts came in the next day. Changed out the new parts and the problem was solved. Since I was now familiar with the repair process, this one only took 1 1/2 hours. Very pleased with the level of service and advise received from your group.
Other Parts Used:
Split Ring Hub Washer Tub Bearing Tub Bearing Washer
  • Walter from IRVING, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
loud squeal on spin cycle Bad tub bearing.
First buy the tub nut wrench. I can't over emphasize that! $12 at amazon. With out it getting the inner tub out will be the worst part of the job. And you will have to buy a new nut. I had trouble getting the old bearing out of the outer tub. I had to drive it out with a punch. The only other problem I had was after getting everything back together the new tub seal leaked. When I installed it if fit very loose on the OD. I ordered a new seal hoping it would fit tighter but it didn't so I coated the the seat of the tub and the OD of the seal with gasket shellac. That solved the problem. Working great.
Other Parts Used:
Tub Seal Split Ring Tub Bearing
  • Dan from Mendota, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The washer was really noisy and it leaked.
I followed the video and paused it after every step. What gave me the most trouble was the tub nut which would not turn so I used a chisel and it just disintegrated along with the split ring, so that worked. Now its like a new machine. It was a fun job and I'm glad I did it instead of replacing the whole washing machine.
Other Parts Used:
Tub Seal Split Ring Hub Washer Tub Bearing Tub Bearing Washer Hub Nut
  • Eugene from BALLSTON SPA, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisey during spin cycles
Followed videos on partselect.com for changing tub bearing. Video does very good job of showing steps required. Repair would be easy if washer was new. First problem was conical tub nut could not be loosened even applying penetrating oil and heat. Finally resorted to 1/2" drive pneumatic impact gun (wrench) which hammered about 10 seconds before the nut came loose. Had to purchase 1-11/16 deep well 6 point impact socket at cost of about $30 for this task. Second difficulty was removing tub seal whose exterior rubber coating had apparently failed and the seal internal metal parts corroded causing it to expand. The tub seal had to be beat out from the bottom side using a drift. The next difficulty was removing the tub bearing which had corroded from minor leakage through the tub seal. Corrosion made the tub bearing outside diameter (OD) larger so it could not be removed using the method in the video. The outer tub bottom side was supported as close to the center as best possible and a socket just smaller than the tub bearing OD was placed on top of the bearing and was used to drive (hammer) the tub bearing out. There was a lot of cleaning necessary especially on the inner tub conical fit areas where tub rides on the split ring and hub nut. During reassembly the tub seal did not have a press fit into the tub; it was barely finger tight. I suspect the tub had permanently distorted in the seal area because the old tub seal had corroded and expanded. So silicone sealant was applied to the outside diameter of the tub seal to assure no leakage around the seal. I allowed that to cure overnight to be certain the seal would not move when inserting the shaft and mode shifter through the seal. A very light oil was applied inside the tub bearing. The last problem found was when tightening the bolts holding the base frame to the outer tub the base frame was pulled to one side so the mode shifter was not concentric with the base frame. This would place a side load on the mode shifter shaft and tub bearing. This was resolved by placing a 1/16" thick washer between one leg of the tub and base frame which maintained the base frame concentric to the mode shifter as the tub to base frame bolts were tightened. The repair is conceptually easy to perform but was challenging due to corrosion and detergent residue from 11 years operation. Now the washer rotating parts are essentially new, the repaired assembly is probably better than the original factory assembly, and the washer should operate for another ten years before the mode shifter bearing goes out again. A longer repair than anticipated but time and money well spent. Being retired helps.
Other Parts Used:
Tub Seal Shaft and Mode Shifter Assembly Split Ring Dial with Compression Ring Timer Knob 6-Rib Drive Belt Hub Washer Tub Bearing Tub Bearing Washer Hub Nut
  • Daryll from MURRYSVILLE, PA
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water was dripping down onto the belt and stopping movement
front back and top have to come off, but contrary to 'youtube' instructions, 'nothing' has to be disconnected, if the washer is pulled away from the wall and power unplugged things can be unscrewed and pushed back enough to pull the inner tub out and get to the seal without disconnecting water lines wires or anything else.. the main shaft nut is aluminum and the shaft is 'castellated' so alittle penetrating oil on it and a short 10" pipe wrench in conjunction with a 2lb sledge busted it loose easy enough so i didnt need to buy a spanner .. the seal was easy to get out with a couple of screwdrivers wedged in the sides .. the old split ring crumbled upon removal also so get one of those .. i lucked out on the washer that goes with it and mine was still usable but if it was rusted any more than it was i wouldve needed that also .. so good idea to get the 3 items if your doing the seal - seal, split ring, and washer - another thing, i cleaned everything up good, knocked everything off with a brass brush, polished the shaft seal area with some 600 grit and then lubed the seal with silicone grease thinking it might be hard to get in .. it wasnt .. and it leaked slightly until i did several loads .. in hindsight it would be better to 'lightly' coat the outer edge of the seal that mates to the tub with a good silicone gasket maker, the inner lips with the grease would be fine ... so thats about how it went, parts came quick and i had it all fixed up in a couple of hours .. cleaning things as i went probably took longer than the wrenching ..
Other Parts Used:
Tub Seal Split Ring
  • B. from WILLISTON, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wore out split ring
Go to You tube
Other Parts Used:
Split Ring Hub Washer Hub Nut
  • Tom from VERMILLION, SD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bearing was making noise on spin cycle
Disassembled washer removed shaft and drive tube assembly reinstalled new unit and replaced split nut during assembly.
Other Parts Used:
Shaft & Drive Tube Assembly Split Ring
  • Dana from MIDDLEPORT, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy while spinning
I dissasembled the machine and it took about 30 minutes. Orderd the parts recommended for noisy spinning. Reinstalled the new parts / changed all drum straps. Cleaned the drain drum and spin drum and after complete reassembly the washer is still noisy in agitation and spin cycle. The motor,transmission,counter weight,and drum look ok but there is still a reason why the machine is still noisy. Spent 120.00 dollars on parts so far but the drum and motor,transmission and counterweight are very expensive to replace. I am just going to keep using the machine until the washer fails to work anymore. I'm not going to put any more money in the washer. I will just buy a new one. It's not hard to dissasembled and reassemble the washer. I purchased the parts that was recommended to fix the washer but they were not the ones.The new parts did help like the tub seal but the bottom line is that the washer is still noisy. I watched your videos to work on the washer and there were no special instructions on disassembly and reassembly. Like always there must be more than i know to repair this washer. Thanks
Other Parts Used:
Dual Action Agitator Tub Seal Split Ring Agitator Coupling Screw - 1/4-20 MCH HXW 5/8 S Water Pressure Switch Hose Hub Washer Tub Bearing Tub Bearing Washer Tub Dampening Strap
  • Thomas from SELAH, WA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

5 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
January 10, 2018
The washer will wash and agitate and drain but when it comes to the spin cycle the Green light is lit on the panel acknowledging it is in spin mode but nothing happens. There is no clog in the line to the sensor on the tub. I have tried resetting it by lifting the lid 6 times in 12 seconds. The belt is fine and the clutch engages. Any other ideas to diagnose?
For model number WHRE5550K2WW
PartSelect logo
Hi Bob, Thank you for your question. If the washer is not spinning, there are some parts that you will need to check to see which one is causing the issue. You will need to check the belt, the lid switch with wire harness, the drain pump and motor assembly, the tub dampening straps, the split ring, the tub bearing, the tub seal, the magnet assembly and the shaft and mode shifter assembly. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Karen
January 22, 2018
Just replaced tub bearing. Machine is quieter during spinning cycle and the tub itself seems to stay in place better, but during the wash cycle it sounds like something is rubbing together. Did i tighten something too tight, or is something else worn and needs to be replaced? No one thinks my husband and i can fix this washer, but we are determined to earn some bragging rights. Any help would be appreciated.
For model number GTWN2800D0WW
PartSelect logo
Hello Karen, Thank you for your inquiry. I would start by checking the agitator and the agitator coupling to see if they are worn or cracked. Then check the drive pulley, belt and pulley nut. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Nathan
March 6, 2018
My washer fills 1/4 of the way an stops doesn't do anything after that but if i switch it to drain and spin it drains but still doesn't spin.
For model number GHWN4250D0WW
PartSelect logo
Hi Nathan, Thank you for your question. With multiple problems like your appliance not spinning and not filling correctly, I would say check your lid switch and your pressure switch along with the tube that goes to the pressure switch. It sounds like one of those parts might be causing the issue. If they are both fine however, you might have to look into your control board being the issue. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
ERICA
November 6, 2018
I changed the tub seal, split ring, drain pump, tub bearing washer {only the small ring} & the hub washers but my washer is still leaking water.. should i change the medal tub bearing washer also & the hub nut? i don't know what else it could possibly be.. it leaks a tiny bit but when it gets about a 1/4 of water it really drips out a lot!! please help im out of ideas!!
For model number WJSE4150B1WW
PartSelect logo
Hello Erica, Thank you for the question. I suggest checking or replacing the Tub Seal, Part Number: PS4704237 and the Hub Nut, Part Number: PS271505. You can also check for wear or damage to the Inner Tub Base Hub, Part Number: PS273296 and the Outer Tub, Part Number: PS9493102. Thank you for your inquiry, good luck with this repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Bob
January 8, 2018
My washer is not agitating and spinning on the drain and spin mode. How would I know if it is the split ring that is the problem?
For model number WHRE5550K2WW
PartSelect logo
Hi Bob. Thank you for the question. Only way to know for sure is to take the appliance a part and check the split ring for damage or wear. Hope this helps!

Was this helpful?
Thank you for voting!
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1766022
Manufacturer Part Number: WH02X10265
Brand
Model Number
Description
General Electric
51451Y1WW
Washer
General Electric
51451Y2WW
Washer
General Electric
52120TAWB
Washer
General Electric
56021A0WW
Washer
General Electric
56031A0WW
Washer
General Electric
56041A0WW
Washer
General Electric
56051A0WW
Washer
General Electric
56121T2WW
Washer
General Electric
56121T3WW
Washer
General Electric
56121T4WW
Washer
General Electric
56121T5WW
Washer
General Electric
56121T8WW
Washer
General Electric
56121TAWW
Washer
General Electric
56121TBWW
Washer
General Electric
56200T2WB
Washer
General Electric
56200T3WB
Washer
General Electric
56200T5WB
Washer
General Electric
56220T6WW
Washer
General Electric
56220T8WW
Washer
General Electric
56220TAWW
Washer
General Electric
56220TBWW
Washer
General Electric
56221B0WW
Washer
General Electric
56221B1WW
Washer
General Electric
56221B2WW
Washer
General Electric
56221B3WW
Washer
General Electric
56221T6WW
Washer
General Electric
56231B0WW
Washer
General Electric
56231B1WW
Washer
General Electric
56231B2WW
Washer
General Electric
56231B3WW
Washer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service