Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Joseph D - October 16, 2020
Verified Purchase
The part I ordered was the exact fit.
The part arrived in a few days and was exactly what I needed. Was easy to install and works just like new.
★★★★★
★★★★★
Adele G - April 2, 2019
Verified Purchase
Perfect fit that works well.
It was a small part with good directions. We had to pull the oven out, take off the side plate, and change the switch. Light still didn't work!! We took off the top plate and found one of the two wires had come off the lamp socket!!!
THEN ALL WAS WELL. (The old switch worked OK also, but we used the new one anyway.)
★★★★★
★★★★★
Salih A. Hindas / DHA 6 - January 4, 2019
Verified Purchase
Original GE Part
The Switch was kept in its original packing as a spare part.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Change a broken oven door glass
Opened the screws holding the handle of the door, then insert the new glass and retighten the screws holding the handle back in place.
The first step was to determine whether the problem was with the fan itself or the switch. I did this by opening the back cover and using a Volt meter to verify that the fan was not getting power. (I could have skipped this step.)
Next, I unplugged the range, closed up the back cover and lifted the range hood by removing two he
... Read morex head screws that are just inside and on either side of the top of the opening in the range door. Propping the hood open, I removed the connector leading to the switch, then pushed the switch out the front. Inspection showed that the switch was damaged so I closed up the range and ordered the part from Part Select. Once the part arrived, it was a 15 minute job to unplug the range, lift the top, install the new switch, and close up the unit.
Caution. On starting to install the switch, I failed to unplug the range and my finger brushed one of the hot contacts leading to the switch. Thankfully, I was not injured. Do not repeat my mistake on this issue. Unplug the range even if you're only installing this simple switch.
Read less
Michael from Albuquerque, NM
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
17 of 21 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burnt Smell
Unplugged the Range and removed the two screws holding down the cook top. You do not need to remove the vent chamber at the rear of the range since the top lifts up about 4 inches. This should be enough room to get your hand onto the plug going to the door switch. Pull off the plug and remove the swich. Pop in the new one, put on the
... Read moreplug, reinstall the two screws and you are done!
Read the thread on "burnt smell" and DO NOT assume it is a burned out element. Follow your nose!!
Read less
Eugene from Hilton Head, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
8 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken
July 6, 2023
our oven is throwing a F96 code..how can we fix this ourselves? The local appliance company wants $245.00 just to come look:(
For model number JT5000SF2SS
Hello Ken, thank you for your inquiry. The F96 error code indicates that you have a problem with your cooling/blower fan and that part may need to be replaced. Your cooling fan part number is PS8754491. We hope this solves your problem!
Hi Gary, thank you for the question. We would suggest checking the door light switch first. If it is fine, the issue could be with the halogen bulb, part number PS8754479. It illuminates the oven's interior. You may need to replace it to fix the issue. We hope that helps!
