CONTROL OVEN TO9 WB27X45466

Part was great simple to put in. Only thing was my oven is ten years old. And the code to set it up was not on the paper work. When I called this company they told me to call GE. Took 4 hrs to get some one with the knowledge to get the code

It should be more clear that the face plate is not included and that it cannot be ordered. That is the only reason I did not give 5 stars in this review.

It all started with my GE cheap oven light not working. Purchased an appliance light from Lowe’s. Pulled off the protective cover and un screwed the old bulb. Screwed in the new light and there was a flash. Noticed the stove worked but not the oven and of course not the oven light. Unplug the stove and removed the covers. Found nothing out of ordinary. Removed circuit board and noticed the burnt silver area. Ordered a new circuit board, replaced it, turned on power and it booted up correctly. Entered the correct code, set the clock and all was fine till I turned on the oven light. Another flash and burnt circuit board. Looked into oven light wiring and found nothing of suspect. Repaired original circuit board with wire and solder and placed in oven but removed the oven light wiring plug. All is well with oven but no light and out $150 for the new, now broken circuit board. In my experience in changing many oven lights of various brands, I have never unplugged the stove/ oven beforehand. Don’t know what to think about this, but I would have never called a repair man to replace a bulb. Go figure!!!!

Easy to install probably ten minutes

Oven and part works OK. What doesn't work is the light for the burner. It does not stay lit to tell me its still hot. The original panel light stayed on when I shut it off that it was still too hot to clean.

The panel arrived in a week and was super easy to install.The color coded connections made it easy to do correctly.The only detractor was having to use the old panel cover.

The part. Came on time and in good condition

After find the model number I ordered the part. It arrived quickly and only took about 30 minutes to install even though it was a bit different than the original. Everything went smoothly, including the sticky label using a hair dryer and stuck right on the new part. Alls well and I didn’t need to spend $700 or a $1000 for a new stove. I had to crawl around on hands and knees until I found the model number. Take the time to do this. Don’t try identify the stove by the picture.

The part was exactly what I needed and works perfect

The diagrams and description made it easy to find the correct part and it came quickly and was easy to install