WHEEL & BUSHING ASS 5304532229

Just pushed it onto the rod that held the old one

Very, very easy. Pop off the old wheels and snap the new ones into place on the rack.

Popped the old melted wheels off and simply clicked the new ones into place. It took less than 2 minutes.

I went to your website found part# and parts diagram and ordered parts . I picked standard shipping . That evening e-mailed me they were instock and shipped also gave tracking # thet parts were here the next day.I removed the front dec panel then the 4 nut& bolts holding door to hinges(with door in closed position).Then I removed the 2 screws holding the hinges to the frame/axle. Replaced hinges with new ones .Put screws back in frame/axle . Put 4 nut and bolts back to secure door to hinges . Then i reinstalled under counter put new wheels on lower rack . I then filled it with dishes and ran a long cycle checked for leaks THEIR WERE NONE!!! THANK GOD !! Job complete, Thanks parts direct for a well designed website and detailed pics and parts#. TIM

Installed New rollers onto bottom rack. Part order & delivery were top notch from Partselect. Will definitely order from them again.

This could not have gone easier! As long as you get the proper parts it's a piece of cake. I wish everything was this easy!

Alighned the bracket and pushed in.

Snapped the new one in. One second repair - like new.

Rollers just snapped on the diswasher rack. Took just seconds to do.

Remove the bottom cover plate. Disconnect the water inlet and black rubber hose. Remove 2 mounting screws. Pull out electrical connector. Reverse order. Be sure to get the brass inlet connector really tight so it won't leak. I did the final tightning after the part is mounted. Not a bad repair at all. The only problem was that it leaked in the first place and messed up my subfloor and laminate flooring.