This part is the replacement door handle fastener for your refrigerator. It is made of white plastic and metal, is sold individually, and measures approximately 1-1/4 inches by 1 inch. The door handle fastener allows you to connect your door handle to the refrigerator door. If your door handle is loose or missing, this is the part that will replace it. This part is an authentic OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t open or close
This part works with the following products:
Refrigerator.
Part# WR01X39781 replaces these:
WR01X25070
Customer Reviews
Average Rating:
★★★★★
★★★★★
9 Reviews
4.1
Filter By Rating:
5 Stars
6
4 Stars
1
3 Stars
0
2 Stars
1
1 Star
1
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Tammy G - 18 days ago
Verified Purchase
Easy Repir
Received my handles for my frig, replaced the same day, easy to do
★★★★★
★★★★★
Darryl D - February 2, 2024
Verified Purchase
Freezer Handle Repair
Our freezer handle kept falling off every few days when we were opening the door. I saw that the fastener clip was broken. I put in the make and model of our refrigerator to see where I could get the part and PartSelect came up. I bought the part and it was a perfect fit. No more holding the handle of our freezer in my hand.
★★★★★
★★★★★
LYALL E H - August 16, 2023
Verified Purchase
Easy repair
HANDLE TO GE REFRIGERATOR FIT PERFECTLY AND WAS EASY TO INSTALL.
★★★★★
★★★★★
Craig G - May 18, 2023
Verified Purchase
Easy repair.
The part was easy to install and the repair seemed to be very affective, but it was short lived, the handle comes off, almost as quick and easy as it did when it was broken.
★★★★★
★★★★★
Blake A - August 18, 2022
Verified Purchase
What I expected
The fastener was easy to install, fit perfectly, and got my refrigerator back in original condition! Thank you.
★★★★★
★★★★★
Marc R - January 26, 2022
Verified Purchase
Fastener for fridge
They part was delivered on time and fixed the issue.
★★★★★
★★★★★
Tomas G - November 8, 2020
Verified Purchase
Perfect no problems
Perfect condition-received expediency
★★★★★
★★★★★
Edward P - October 5, 2018
Verified Purchase
But 2 get one and an empty package.
I ordered 2 tiny plastic clips each cost over 9 dollars. When they arrived one package was just as expected. The other however was an empty, sealed package. I emailed this company sent along pictures of both the packages and was told I would have to have the missing one returned then re order another one. No thank you I'll chock it up to lessons learned. I sent them proof that the package was sealed and the part was not in it. Any normal company would have just shipped a new one. I will not be ordering from this company again.
★★★★★
★★★★★
John S - June 6, 2018
Verified Purchase
Easy Part to Replace
Thought from the description that two parts for handle were included, but only one side connection was included with each 'part'. Got lucky that I ordered two to begin with. Thought I was buying a back-up set, but just got the two handle bases to fix the handle once. Easy replacement, repair. Wish directions had been included to tell you how to fix the issue with the part.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 8 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
For the second time the handle clips broke on the freezer. This time it also broke part of the mating bracket in the handle. Poor design. Last time I could get away with just the clips on the freezer door.
The handle was already broken. Wish I would have checked the mating clip surface of the handle. But, after getting all set up saw this problem, and ordered a handle. Taking off and installing is simple. Tap the freezer handle end to the left using a soft mallet on the right end. I suspect a hammer would work, but without protecting th
... Read moree handle could bend it or at least scratch the paint. I suppose a folded rag and a hammer may work. Anyway, once off, replacing the clips on the door is a Phillips head screwdriver to unscrew and replace the door clips. Then, carefully tapped the handle from the left end to slide the mating piece in the handle back on and tap tightly. There were many YouTubes on the thing since it seems to me to be a very poor design. But maybe we are too hard on the handle???
Read less
Thomas from WAUWATOSA, WI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer door handle broke off
As a lot of people have reported, the freezer door handle is attached to the freezer door with cheap plastic mounts. Since it takes some force to open a freezer, these eventually break. Unfortunately, you cannot buy the plastic mount pieces separately - you need to buy the whole handle. Even worse, for some models (like my GNE25JSKFFSS),
... Read morethey only list the threee handle set - which is hundreds of dollars - just to fix a small plastic part. Luckily I found this item, which is the exact freezer door handle w/plastic mounts that I need. It isn't listed for my model refrigerator for some reason, but it is the same part. I also bought an extra set of the fastener handle assemblies - the part that screws into the freezer door to hold the mounts, because I broke one off when removing the old broken mount. Once you have the parts, its easy. If you need to replace the fasteners attached to the door, just unscrew the one screw on each and remove the fastener. Put the new fasteners on - insert the small nub in the small hole in freezer door and insert the screw through the large hole and screw it in.
Once you have 2 fasteners on the door, line up the holes on the handle mounts over the fasteners - it does not seem to matter which direction is up for the handle. You should be able to push the handle in so that the fasteners go in the holes on the back of the mounts, and the mounts are flush with the door - move the handle around until it is flush. Then slide it to the right with a little bit of force to get the clips on the fasteners to engage. The handle should now be securely attached.
After ordering these expensive plastic, doomed to break again and again fasteners I had a fella make some on a 3d printer, each one for under 1 cent!!! Not the 7.50 each I paid here.
Dan from IOWA CITY, IA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle kept coming off
Replaced a clip.
Craig from MANSFIELD, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Part broken accidentally.R
Repair was made simply and quickly by removing broken parts and replacing with new. No problems
Naomi from SPRING VALLEY, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle on freezer door broke
unscrew fasteners and cleaned out "debris" from old handle with pliers. Put fasteners back in and installed new handle - slide from the side with the raised pieces until you hear a click - done
Plastic clip failed to hold the handle on the freezer doo
Very easy and the part was a perfect fit
Dave from AURORA, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lower pull out drawer handle fastener to freezer was broken on one side.
I ordered the plastic fastener, that held the handle to the freezer door. after I received the part I used a screw driver to attach the fastener to the door. Then I placed the handle onto the fastener and bumped the handle with my hand to the left. this attached the handle to the door.
David from BENICIA, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
10 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cindy
July 30, 2022
Is this the fix to the recall? My model is in the recall but my serial number isn’t. Ugh!
For model number GNE27JYMNFFS
Hello Cindy, thank you for writing. The manufacturer states The recall: This recall includes units of the GE-branded GFE26JYMKFFS, GFE26JYMNFFS, GNE27EYMKFFS, GNE27EYMNFFS, GNE27JYMKFFS, and GNE27JYMNFFS French-door refrigerators with serial numbers that begin with the following two-letter combinations: DR, FR, GR, HR, LR, MR, RR, SR, TR, VR, ZR, AS, DS, FS, GS, HS, LS, MS. We do sell the Fasteners PS16619453. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Laurie
August 21, 2023
Does this work for the Freezer door as well? Our clips are broken.
For model number GNE25JGKGFWW
Hello Laurie, thank you for reaching out. Yes, the part that you are referring to is compatible with the freezer door. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gregory
July 16, 2023
my freezer door handle is loose how do i tighten
For model number gne25jskffss
Hi Gregory, thank you for contacting us. You may need to gently tap a rubber mallet on the right end cap of the handle towards the left until you see the handle disengage from the fasteners. Tighten the fasteners with the help of a screwdriver. Now, to install the freezer handle, brace the refrigerator on the right side and hold it in place. Align the slots inside the handle end cap to the mounting fasteners and slide it to the right until it comes to a hard stop. Use a rubber mallet to gently tap the left side of the handle until the handle no longer moves. We hope this solves your problem!
Was this helpful?
Thank you for voting!
RICHARD
July 30, 2023
The freezer door handle is very loose on this unit. How do I replace it
For model number GNE25JSKKFSS
Hello Richard, thank you for reaching out. To remove the freezer handle, gently tap a rubber mallet on the right end cap towards the left until you see the handle disengage from the fasteners. For the installation of the freezer door, attach the handle to the mounting fasteners by aligning the slots on the handle with the mounting fasteners. Slide the handle to the right until you hear a click. We hope this helps!
Was this helpful?
Thank you for voting!
Kevin
September 27, 2023
I am looking a kit possibly that contains the freezer door handle and the clips that fasten to the door itself that the handle connects to. I can find the handle but not the clips.
For model number GNE25JGKLFWW
Hi Kevin, thank you for a very interesting question. According to our research, the fastener handle assembly and the white freezer door handle do not come into an assembly. You may need to purchase them separately. The part number for the fastener handle assembly is PS16619453. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Kathleen
November 16, 2023
HOW MANY COME IN A PACKAGE
For model number WR01X39781 DOOR CLIPS
Hi Kathleen, thank you for the question. Based on our research, the part mentioned is a single door fastener. Please submit a new question if you have any follow-ups!.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
