Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Don H - April 29, 2023
Verified Purchase
Easy repair. Perfect part.
The part came fast in great condition and was a really easy fix. 2nd order from parts select. Great experience both times.
★★★★★
★★★★★
Irwin B - April 13, 2023
Verified Purchase
All went well
Came quickly and was exactly the part we needed. Saved a load doing this relatively simple repair ourselves.
★★★★★
★★★★★
Linda H - February 6, 2021
Verified Purchase
PartSelect saved the day.
The part arrived quickly and the dishwasher is back in good working order. Thanks.
★★★★★
★★★★★
Anthony B - September 26, 2018
Verified Purchase
Customer service and shipping bad. Part was OK
I ordered 2 parts one shipped one did not. The first one took about 10 days. I had to call to see why 2nd part did not ship. She told me the warehouse just didn't ship it. I asked if she could ship it 2nd day UPS so they would get to me at the same time she said no way we don't do that. this took another 6 days to get to me. It was about 16 days total. UPS ground should be 5 days MAX, This company was good when they first opened. I don't know what happened.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
I had a hole in the drain line of my dishwasher.
It was relatively easy to fix. I unscrewed the mounting screws from the cabinet, slide the dishwasher out to access the pump under the dishwasher, I did raise the dishwasher on the left side and steadied with a stool to make access to the pump fitting easier. Then I loosed both clamps at the ends of the hose ie. from the dishwasher pum
... Read morep and the connection to the sink drain line, pulled the clamp off of the end that connects to the pump and placed it on the new hose connection, I removed the old hose, connected the new one and tightened the drain line connections. I placed the hose in the hose holders on the side of the dishwasher slid the dishwasher back into place and secured it in place with the mounting screws.
Read less
Tina from SOUTH WEST CY, MO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ray
December 4, 2024
I kept getting the H20 error code; and dishwasher would shut down. I just took off the High Hose Expel tube and I can blow in only one direction. Is the tube clogged? Or is there a valve to keep water returning?
For model number PDT715SYN8FS
Hi Ray, thank you for reaching out. The H20 error code means that the dishwasher is not getting enough water or no water at all. If you can only blow air through the high hose expel tube in one direction, it might suggest that there is a check valve in place. If the tube is clogged, you can not blow air through it at all. Inspect the tube for any blockages and clear them. Other wise, you may need to replace the water valve assembly, part number PS16217027, to fix the issue. We hope this solves your problem!
