This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. Check your user manual and model number to see if this is the right part for you. Make sure you empty the lint filter after every use of the dryer and check the filter slot for an excess buildup of lint, which can shorten the life of your filter and be a fire hazard. The screen is approximately 20 inches in length, not including the handle, and around 8.5 inches wide.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Takes too long to dry | No heat or not enough heat
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Leonardo
September 26, 2021
Have this Whirlpool Dryer and I need to find out if you guys Carrie the lint catcher, my is torn apart in the mesh. Need to buy a new one. Please let me know if you do how much it cost and how much do you charge for shipping. Thanks, Leo
For model number WED4800BQ1
Hello Leonardo, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS16543575. Please see the site for the current prices. Once you go through the check out, it will give you the shipping options to choose from. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Can I order a replacement lent filter for my gas dryer?
For model number NGD4655EW
Hello Aaron, Thank you for your inquiry. We have researched the model number that you have provided and show the lint filter screen as part# PS16543575. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sheema
October 5, 2022
I am looking for a lint filter replacement for my model.
For model number wed5200vq0
Hello Sheema, thank you for contacting us. The lint filter/screen, part number PS16543575, is a good fit for your model. It is used to collect lint during the dryer cycle, to prevent damage to the machine, and to prevent lint from sticking to clothes. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
I need to replace my lint filter for the Whirlpool dryer model above. Do you carry this?
For model number LER7648PTO
Hi Gail,
Thank you for your question. The part number listed under your model number for the lint filter is PS16543575. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
The p/n that I have is 8557850 and the is not listed in what your part replaces. Please advise.
For model number LEQ9030PQ0
Hello Richard, thank you for reaching out. This screen, part number PS16543575, is listed as compatible with your given model. According to our research, this part number replaces 8557850. If you require assistance to place an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Lynn
27 days ago
Which lint screen will work with my model ?
For model number rgd4640yq2
Hello Lynn, thank you for writing. Yes, the Lint Screen PS16543575 you had chosen is compatible with your model. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Lynn
26 days ago
I have a roper lint trap # is 8558459 I need lint screen which one will fit??
For model number rgd4640yq2
Hello Lynn, thank you for your question. Yes, the Lint Filter PS16543575 you had chosen is compatible with your model. Please feel free to give us a call. We look forward to hearing from you.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door catch broken; lint filter handle had come off
Removed some screws and partially dismantled the door so I could get the old catch out. Inserted the new catch, and put the screws back in. Saved me an $80+ service call. On the filter, I had to use pliers to remove the old one because the handle had broken off. Did that, and inserted the new one. Done. Sears had been unable to supply me with a new filter.
After 30 miutes of research on this website I felt confident to investigate the problem. Removal of the back cover is straightforward. Initially I did not appreciate and obstruction of the ductwork exitting the dryer. I bypassed the thermal fuse by removing the wires and temporarily taping them together and heat was restored. Knowing flow was OK exitting the dryer I investigated flow from the lint trap to the blower motor which is where the problem was located. In our case the lint filter was torn allowing many small objects and lint to near completely clog the pathway between the lint trap and the blower motor. It was difficult to appreaciate how obstructed that pathway was without removing the entire channel from the machine which was simple and required removing two screws at the lint trap opening followed by 3-4 screws on the back of the channel. Once removed, it was easy to appreaciate the debris clogging the channel and was easy to clean with a hose and running water. Replacement was a snap. The parts were oredered and sent in a day. I prophylactically replaced thermastats based upon a recommendation from another website. Replacing previous parts with new parts was a snap. Out the door we were up and running for around $100 (including new thermostats). The dryer repair man may go the way of the dinosaur.
Needed lint filter for my old Kenmore dryer that was no longer manufactured by Sears.
Lint filter supplied by Parts Select was an exact replacement by an aftermarket manufacturer. I put the old one and the new one side by side and they were identical (of course, the handle wasn't broken off on the new one!). I coulnd't be happier. It arrived at my house 2 days after I ordered it. I highly recommend Parts Select.
Richard from Fairfax, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
35 of 36 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old lint screen -torn at wire mesh
Local stores did not have any in supply. Went to Partselect and located lint screen, ordered, received in 3 days. replaced screen, Wife now happy again...
Chris from Morgan City, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
27 of 28 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old lint screen on the dryer was broken
I analyzed the situation to see how to remove the old lint screen. I carefully pulled out the old lint screen. I was careful not to drop it. With caution, I placed the old lint screen in the trash receptacle that was nearby. Next, I opened the box that the new lint screen came in with a sharp knife. I removed the new lint screen from the box, took off the plastic wrap and inserted the lint screen in the same slot that the old one used to be in. I tested that it was seated correctly by pulling it out and reseating it in the slot. The true test came when I ran my first load of laundry through the dryer. The total repair time for this fix was 14.92 seconds.
Bill from Farmington Hills, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
23 of 28 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
part number was different from the original, but it fit just fine.
installed the new dryer lint screen, it fit perfectly and is now in operation.
John from Bristol, CT
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
20 of 30 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace lint filter
with both hands
Ed from Greensboro, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
9 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old screen failed ripped needed replaced.
After researching and finding correct replacement unit placed order and waited to receive. Screen is located top of dryer so replacement simple and fit was perfect.
Michael from Kingman, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
8 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
handle broke on filter
just slide the new filter in.
Connie from Gaithersburg, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
7 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat in dryer and lint filter torn
Dryer didn't heat. I got the heating element thru sears and when I ordered it I thought I should also order the thermostats but I didn't. Element arrived two days after ordered right on time. Slipped right in in a few minutes. Turned dryer on. No heat. Went back to drawing board. Watched videos on part select site and realized I needed thermostats. Ordered them and lint filter. Arrived right on schedule and also slipped in in no time flat. Turned dryer on and yes it heated perfectly. Wife was pretty impressed with new lint filter as other one was torn with jagged edges. MY SUGGESTION: if your dryer doesn't heat and you can't test each individual item thermostats and heating element order the three of them ( high limit and cycling thermostats and heating element) cause they'll probably will all go at the same time anyway. Then won't have to wait on the second shipment if things don't work with partial replacement. Parts select was great and videos are well understood and easy to follow. Would certainly use again.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mary F - August 19, 2022
Verified Purchase
repair of my appliance was don effortlesley.
The part that I ordered was delivered quickly and exactly what I needed. Any time I need a part for any appliance I wont hesitate to call Part select. I am very pleased with how easy it was to order from them and their service is excellent.
★★★★★
★★★★★
Beverly B - June 8, 2022
Verified Purchase
Very Good Service
The part was perfect for the replacement of the old worn out screen
★★★★★
★★★★★
David C - March 19, 2022
Verified Purchase
Worked as expected
The part is in good shape when received and works well for my unit.
★★★★★
★★★★★
Mary Grace M - March 18, 2022
Verified Purchase
Better than expected
Replaced in a few minutes and is much nicer than old one. Love it??
★★★★★
★★★★★
Leticia M - March 17, 2022
Verified Purchase
Perfect fit
The part fit perfectly.
★★★★★
★★★★★
Brian M - November 17, 2021
Verified Purchase
drier repair
part was perfect fit!
★★★★★
★★★★★
Doug D - November 4, 2021
Verified Purchase
Easy to order!
Easy to find and order the part I needed and super fast shipping!
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout