Maytag/Maytag_Thumb/6ZPRDMKD.gif
See part 10 in the diagram
Replacing your Kenmore Dryer SCREEN play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

SCREEN

★★★★★
★★★★★
7 Reviews

Rated by 22 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your AGD4675YQ3!
 Fits your AGD4675YQ3!
PartSelect Number PS16543575
Manufacturer Part Number W11522758
Manufactured by Whirlpool
Product Description

SCREEN Specifications

This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. Check your user manual and model number to see if this is the right part for you. Make sure you empty the lint filter after every use of the dryer and check the filter slot for an excess buildup of lint, which can shorten the life of your filter and be a fire hazard. The screen is approximately 20 inches in length, not including the handle, and around 8.5 inches wide.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Takes too long to dry | No heat or not enough heat
This part works with the following products:
Dryer.
This part works with the following products:
Kenmore, Whirlpool, Maytag, Crosley.
Part# W11522758 replaces these:
2006, 2007, 26000348851, 348851, 689465, 8211, 8219, 8557857, 8557882, 8558463, 8559787, 8565972, 99989680, 99989681, W10641634, W10717210, W11451394, W11538107, W11607443, WPW10717210VP
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

8 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Leonardo
September 26, 2021
Have this Whirlpool Dryer and I need to find out if you guys Carrie the lint catcher, my is torn apart in the mesh. Need to buy a new one. Please let me know if you do how much it cost and how much do you charge for shipping. Thanks, Leo
For model number WED4800BQ1
Hello Leonardo, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS16543575. Please see the site for the current prices. Once you go through the check out, it will give you the shipping options to choose from. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
CHARLES WEMLINGER
November 6, 2021
Can I get the lint filter with an almond colored handle instead of white. Thanks
For model number 11086980800
Hello, thank you for your question. I believe the substituted part number for your almond lint filter is PS11743759. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Aaron
May 24, 2022
Can I order a replacement lent filter for my gas dryer?
For model number NGD4655EW
Hello Aaron, Thank you for your inquiry. We have researched the model number that you have provided and show the lint filter screen as part# PS16543575. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Sheema
October 5, 2022
I am looking for a lint filter replacement for my model.
For model number wed5200vq0
Hello Sheema, thank you for contacting us. The lint filter/screen, part number PS16543575, is a good fit for your model. It is used to collect lint during the dryer cycle, to prevent damage to the machine, and to prevent lint from sticking to clothes. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
play video

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Gail
January 17, 2022
I need to replace my lint filter for the Whirlpool dryer model above. Do you carry this?
For model number LER7648PTO
Hi Gail, Thank you for your question. The part number listed under your model number for the lint filter is PS16543575. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

Was this helpful?
Thank you for voting!
Related Parts:
Richard
December 5, 2022
The p/n that I have is 8557850 and the is not listed in what your part replaces. Please advise.
For model number LEQ9030PQ0
Hello Richard, thank you for reaching out. This screen, part number PS16543575, is listed as compatible with your given model. According to our research, this part number replaces 8557850. If you require assistance to place an order, please contact customer service. We hope that helps!

Was this helpful?
Thank you for voting!
Lynn
December 30, 2022
Which lint screen will work with my model ?
For model number rgd4640yq2
Hello Lynn, thank you for writing. Yes, the Lint Screen PS16543575 you had chosen is compatible with your model. Please feel free to give us a call. We look forward to hearing from you.

Was this helpful?
Thank you for voting!
Lynn
December 30, 2022
I have a roper lint trap # is 8558459 I need lint screen which one will fit??
For model number rgd4640yq2
Hello Lynn, thank you for your question. Yes, the Lint Filter PS16543575 you had chosen is compatible with your model. Please feel free to give us a call. We look forward to hearing from you.

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Kenmore Dryer SCREEN

Replacing your Kenmore Dryer SCREEN play video
Customer Repair Stories
 Average Repair Rating: 4.8 / 5.0, 22 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Door catch broken; lint filter handle had come off
Removed some screws and partially dismantled the door so I could get the old catch out. Inserted the new catch, and put the screws back in. Saved me an $80+ service call.
On the filter, I had to use pliers to remove the old one because the handle had broken off. Did that, and inserted the new one. Done. Sears had been unable to supply me with a new filter.
Other Parts Used:
Door Catch Kit
  • Daniel from Wichita, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
447 of 473 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Heat - everything else was functional
After 30 miutes of research on this website I felt confident to investigate the problem. Removal of the back cover is straightforward. Initially I did not appreciate and obstruction of the ductwork exitting the dryer. I bypassed the thermal fuse by removing the wires and temporarily taping them together and heat was restored. Knowing flow was OK exitting the dryer I investigated flow from the lint trap to the blower motor which is where the problem was located. In our case the lint filter was torn allowing many small objects and lint to near completely clog the pathway between the lint trap and the blower motor. It was difficult to appreaciate how obstructed that pathway was without removing the entire channel from the machine which was simple and required removing two screws at the lint trap opening followed by 3-4 screws on the back of the channel. Once removed, it was easy to appreaciate the debris clogging the channel and was easy to clean with a hose and running water. Replacement was a snap. The parts were oredered and sent in a day. I prophylactically replaced thermastats based upon a recommendation from another website. Replacing previous parts with new parts was a snap. Out the door we were up and running for around $100 (including new thermostats). The dryer repair man may go the way of the dinosaur.
Other Parts Used:
Thermal Cut-Off Fuse Kit Dryer Thermal Fuse Dryer Cycling Thermostat
  • Kent from Sebastopol, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
70 of 82 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed lint filter for my old Kenmore dryer that was no longer manufactured by Sears.
Lint filter supplied by Parts Select was an exact replacement by an aftermarket manufacturer. I put the old one and the new one side by side and they were identical (of course, the handle wasn't broken off on the new one!). I coulnd't be happier. It arrived at my house 2 days after I ordered it. I highly recommend Parts Select.
  • Richard from Fairfax, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
35 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old lint screen -torn at wire mesh
Local stores did not have any in supply. Went to Partselect and located lint screen, ordered, received in 3 days. replaced screen, Wife now happy again...
  • Chris from Morgan City, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
27 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old lint screen on the dryer was broken
I analyzed the situation to see how to remove the old lint screen. I carefully pulled out the old lint screen. I was careful not to drop it. With caution, I placed the old lint screen in the trash receptacle that was nearby. Next, I opened the box that the new lint screen came in with a sharp knife. I removed the new lint screen from the box, took off the plastic wrap and inserted the lint screen in the same slot that the old one used to be in. I tested that it was seated correctly by pulling it out and reseating it in the slot. The true test came when I ran my first load of laundry through the dryer. The total repair time for this fix was 14.92 seconds.
  • Bill from Farmington Hills, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
23 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
part number was different from the original, but it fit just fine.
installed the new dryer lint screen, it fit perfectly
and is now in operation.
  • John from Bristol, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
20 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace lint filter
with both hands
  • Ed from Greensboro, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old screen failed ripped needed replaced.
After researching and finding correct replacement unit placed order and waited to receive. Screen is located top of dryer so replacement simple and fit was perfect.
  • Michael from Kingman, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
handle broke on filter
just slide the new filter in.
  • Connie from Gaithersburg, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat in dryer and lint filter torn
Dryer didn't heat. I got the heating element thru sears and when I ordered it I thought I should also order the thermostats but I didn't. Element arrived two days after ordered right on time. Slipped right in in a few minutes. Turned dryer on. No heat. Went back to drawing board. Watched videos on part select site and realized I needed thermostats. Ordered them and lint filter. Arrived right on schedule and also slipped in in no time flat. Turned dryer on and yes it heated perfectly. Wife was pretty impressed with new lint filter as other one was torn with jagged edges. MY SUGGESTION: if your dryer doesn't heat and you can't test each individual item thermostats and heating element order the three of them ( high limit and cycling thermostats and heating element) cause they'll probably will all go at the same time anyway. Then won't have to wait on the second shipment if things don't work with partial replacement. Parts select was great and videos are well understood and easy to follow. Would certainly use again.
Other Parts Used:
Dryer High Limit Thermostat Dryer Cycling Thermostat
  • Gerard from Huntington, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
4.7
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS16543575
Manufacturer Part Number: W11522758
Brand
Model Number
Description
Kenmore
1106012511
Dryer - ELECTRIC DRYER
Kenmore
11060222510
Dryer - DRYER
Kenmore
11060222511
Dryer - ELECTRIC DRYER
Kenmore
11060522900
Dryer
Kenmore
11060602990
Dryer
Kenmore
11060612990
Dryer
Kenmore
11060622990
Dryer
Kenmore
11060702990
Dryer
Kenmore
11060712990
Dryer
Kenmore
11060722990
Dryer
Kenmore
11060724990
Dryer
Kenmore
11060727990
Dryer
Kenmore
11060802990
Dryer
Kenmore
11060812990
Dryer
Kenmore
11060814990
Dryer
Kenmore
11060817990
Dryer
Kenmore
11060832990
Dryer
Kenmore
11060842990
Dryer
Kenmore
11060852990
Dryer
Kenmore
11060854990
Dryer
Kenmore
11060857990
Dryer
Kenmore
11061202010
Dryer
Kenmore
11061202011
Dryer
Kenmore
11061262311
Dryer - ELECTRIC DRYER
Kenmore
11061802000
Dryer
Kenmore
11061804000
Dryer
Kenmore
11061812000
Dryer
Kenmore
11061814000
Dryer
Kenmore
1106192310
Dryer - ELECTRIC DRYER
Kenmore
1106192311
Dryer - ELECTRIC DRYER

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service