The transmission drives the agitator and spins the basket in the washer. Possible Repair Solution For: Not washing properly, will not agitate, pumps but will not spin.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David R - December 12, 2021
Verified Purchase
easy install..
came packaged very well installed very easily..
★★★★★
★★★★★
Cool Concepts Brenda L - June 27, 2018
Verified Purchase
Works Great
Works Great
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Main bearing in washer tub was worn out
I took the motor, splutch, belt, and capacitor off. Took out agitating plate and removed tub from washer. Took old transmission out and put new in. Reassembling the washer. Followed video instructions from parts select. Easy peasy. Washer runs like new.
After removal of wash plate bolt. Apply Liquid Wrench oil to wash plate spline shaft. Give time for oil to penetrate. In the time it took to disassemble the motor and gearbox the oil had worked. Give the wash plate a good knock with a rubber mallet several times. After that I was able to wiggle off the wash plate by hand without breaking
... Read moreanything. Be sure to pull straight up on the wash plate, any twisting or torquing will bind the spline and the wash plate wont move. The PartSelect YouTube video was perfect for the other parts of the repair.
Ask our experts a question about this part and we'll get back to you as soon as possible!
18 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Theresa
July 20, 2021
Does the gearbox include the tub pulley and is it grooved or flat? Is the belt inverted with the grooved side on the motor and the flat side on the tub pulley? Does part number w11454734 (gearcase) come with new seals?
For model number 110.25132411
Hi Theresa,
Thank you for your question. The pulley is sold with the washer pulley kit and it is flat. The gearcase does come with a tub seal. The belt is not inverted, but flat. Here is a link to one of our YouTube videos that you may reference on how to install the belt, https://www.youtube.com/watch?v=z498g06oWIE&t=113s. The washer in the video may be different from yours, but it will give you a general idea on how to install the part. If you would like to place an order for the parts, you may order them either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Can i change the bearings or do i have to replace the gear case as well
For model number wtw5000dwo
Hi Roland,
Thank you for your question. You will need to replace the gearcase. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Debra
December 5, 2021
Washer doesn't agitate. It does everything else normally, including spinning. I think I need agitator cogs. Is there a model number for the agitator cogs on my Whirlpool model? Thank you.
For model number WTW5000DW1
Hello Debra, Thank you for the question. Since this model does not have the Full/Tall Agitator, it does not have cogs. We suggest checking the Drive Hub Kit, PartSelect Number PS6012095. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Washer shakes violently. I’ve replaced shocks and tested only bounces one when pushed down. Notice when I hold the barrel and spin the drum it doesn’t spine true it wobbles. I have a video of this. Could it be the gear box spindle bent?
For model number wtw5000dw1
Hi Frank, Thank you for writing. We suggest checking the Gear Box for wear or damage. Once the drum is removed, test the shaft to see if it is stable. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Henry
October 24, 2022
Machine works fine but on occasions there is a very very loud grinding and knocking noise during spin cycle only. Are there bearings in the gear case and could they be defective? Agitator, actuator, drive belt and tub agitator parts have been replaced and the sound still exist.
For model number MVWX655DWI
Hello Henry, thank you for contacting us. According to our research, replacing the gearcase should solve your issue. If the issue still exist, we would recommend replacing washer drive pulley, part number PS10057144, and suspension rod support, part number PS3502189. If you require assistance to place an order, please contact customer service. We hope that helps!
My washer will spin but not fast enough to get all the water out of the clothes. My wife has to wring out the shirts and she's not happy. I replaced the drive pulley set and belt. Could I need the gearcase too?
For model number MVWC565FW0
Hello Craig, thank you for contacting us. We would recommend checking the drive hub kit, part number PS6012095, before replacing the gearcase, part number PS16220911. Please check the drive hub for slippage and damage. Provided that the drive hub kit is good replacing the gearcase is the most likely solution. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
When it gets to spin cycle it starts to fill up before it was doing that it wasn't able to spin it fast because pants are towels shirt was dripping wet and said it was done again after it does that goes to done
For model number MVWC565FW0
Hello Keith, thank you for your inquiry. Based on the description that you have provided, we would recommend checking the control board, part number PS12114300, to solve the problem. Glad to be of assistance!
So i replaced my belt and the clutch on my washer and it still has a burning smell on the rinse and spin cycle. Not so much on the wash cycle. I was wondering could it be the transmission or the motor? I did a load on quick wash and thought i seen some oil residue inside on the plate wiped it out and the next day did another quick load and didnt see any oil. Just trying to pin point what it could possibly be. It has the burning rubber smell smale loads you dont smell it as much but a medium load the smell is more prominent. Any help would be great the washer isnt that old and with 5 people in the house laundry is a must everyday.
Amber
For model number WTW5000DW2
Hello Amber, thank you for the question. If you have replaced the belt and clutch, then the issue is most probably with the drive motor, part number PS12584593 or the washer drive pulley, part number PS10057144. We recommend replacing the defective part. If you require assistance placing an order, please contact customer service. We hope that helps!
Washer agitates and drains normal, but will only spin temporarily while making a rubbing sound and won’t spin very fast. The belt looks good and replaced the hub under the agitator about 8 months ago, could it be the bearings in the gear case?
For model number WTW5005KW0
Hi Mike,
Thank you for your question. If the washer is not spinning, the issue may be with the shift actuator. It controls the movement of the washer transmission during the different phases of the wash cycle. This allows the washer to switch between agitating and spinning modes. If the washer fails to agitate or spin, has incomplete cycles where the washer gets stuck in one phase, or unusual noises during operation, the issue is likely the shift actuator and it will need to be replaced. The part number for the shift actuator is PS11769864. We hope this helps!
My washer is out of balance and bouncing everywhere. I’ve replaced the plastic shaft splines but no luck.springs seam ok but it spins out of round by hand . What parts do you suggest
Thanks
For model number Mvwx655dw1
Hello Michael, thank you for the question. According to our research, we would recommend checking the suspension rods carefully. If the issue persists, you may need to replace the transmission, part number PS16220911. It drives the agitator and spins the basket in the washer. We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.