Average Repair Rating: 3.8 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
the oven stoped working and an F3 displayed on the board also a smell of gass was present
thanks to you 'r assistsnce First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, and changing the regulator was just as easy.
removed two screws disconnected inlet pipe and two outlet pipes, removed regulator. Replaced with new regulator. performed leak Test.
Albern from Bainbridge IS., WA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Wrench set
14 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Deborah
January 3, 2023
Does this regulator have a size you can tell me it is. I have regulators but don't want to throw just anything on it.
For model number 79078739405
Hello Deborah, thank you for your question. The markings on the regulator say NAT 4" LP 10. We hope this will help.
Was this helpful?
Thank you for voting!
Jamie
June 19, 2023
gas burners work gas broiler works. oven takes forever to heat up
For model number cew30gf6gwa
Hello Jamie, thank you for a very interesting question. We would recommend taking a look at the temperature sensor, part number PS1528542, to see if it working or not. We hope this helps, good luck with this repair!
oven flame is too high with long yellow tips, I adjusted the burner shutter and with it wide open the flame is still too high with long yellow tips. The stovetop flames are a nice blue color of proper height. Am I correct in assuming that the gas pressure regulator (5304521339) is defective, it does not appear to be adjustable. My range uses LP gas and has burned properly for many years.
For model number 79071513400
A gas flame yellow in color indicates an improper ratio of oxygen for combustion. Often this improper combustion is temporary and could be caused by dust particles or a dirty burner that needs cleaning. Sometimes the problem can be resolved by removing the cap and cleaning the ring. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
