Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
K
November 16, 2021
The left middle side light in the refrigerator compartment is completely out. The rest of the lights in both the freezer and refrigerator compartments are very dim. Would replacing the one that's out with this part fix all the lights? Thank you!
For model number KBSN602EPA01
Hello K, Thank you for the question. We suggest replacing the defective light to fix the dim lights in the appliance. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Fred
July 13, 2021
Why would an led light burn out after only 4 years? I have six, 3 on each side and 4 of the six are burned out. I have led lights that have been on outside for 10 years and they are never shut off and they are still going strong. What is wrong with the your lights that they would burn out after only 4 years?
For model number KBFN506ES500
Hi Fred,
Thank you for your question. Refrigerator LED lights last approximately 5 years. If you would like to place an order for them, you may order them either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joe
September 29, 2021
All led lights in freezer compartment are not working. Where is the led driver located which I believe is not working.
For model number JS48NXFXDE01
Hello Joe, Thank you for the question. The LED Control Board, PartSelect Number PS11737860 is located on the back of the appliance. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
For a while only 1 light was not working on top panel now all 5 lights are out. Can you please let me know what part i have to replace ? Thank you
For model number KRFF507ESS01
Hello Aziz, Thank you for writing. We suggest trying to change out the LED Lights. The part numbers are PartSelect Number PS16218086 and PartSelect Number PS11702378. We hope this helps.
Just wanted to see if you stock replacement lights for this model? I understand it might be Refrigerator LED Light W11462342, but we need them to be in the chrome finish to match the others. Basically six of the eight interior lights of this fridge have stopped working, and what I understand from online videos is that, like a Christmas tree, if one goes out then everyone after will go out along the line? Does that sound right?
For model number KBFN505ESS02
Hello Liam, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS16218086 in the Chrome Trim Finish. In most cases if one goes out, the lights that are in line before it can go out as well. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 6 reviews.
What's this?
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Light out inside fridg.
Put painters tape next to light, so I wouldn't scratch surface. Worked edge of light down and out of hole with small screwdriver. Chechen wireing , light might work ? Unplugged light assembly . Plugged in new light , and reinserted light into opening . Removed tape ,, done. You can use putty knife in place of screwdriver. Be patient. Google helps also.
William from N MYRTLE BCH, SC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
LED behind upper compartment of freezer failed
The hard part was getting the OLD fixture out. They tell you to protect the surface around it with tape, but try sticking tape to a freezing cold surface with water condensing on it! And it's so firmly snapped in place that it takes a putty knife and screw driver to push the prongs back to get it loose. Finally, the fixture is on the ceiling behind the icemaker so very awkward working conditions, plus and you can't see well because ALL of the lights are out (remember, they're in series). To see I had to prop my phone up at just the right angle to shine its little light on the area.
But getting it in was literally a snap. Just snap the couplings together, carefully push the wires into the empty space and slide the rear prongs in, then snap the front ones in simply by pushing the whole fixture firmly. Then pat yourself on the back!
Matthew from ALTOONA, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator lights out
I think the lights are wired in series. When the light in the freezer goes bad several lights in the refrigerator go out but are still good. Replace the lamp in the freezer and all the lights in the refrigerator work again. The only tools I used was a 1" scraper and a very small flat screwdriver to pop the lamp assembly out. Not much room to work in so it was a bit of a job getting the wire connector where it needed to be but not to bad..
Stephen from EGG HBR TWP, NJ
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top Lights stopped working. Flicker on/off for a second but remain off
Isolate the broken LED light fixture by pressing the door switch and releasing it; broken light will remain off and not flicker. Unplug refrigerator and apply painter's tape around the light fixture to protect surface finish from being marred or scratched. Use the putty knife to remove the LED light and disconnect the wiring from connector. Reconnect wire of new part and install by pressing light fixture in place. Remove tape and plug refrigerator back in.
Mark from EDMOND, OK
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the lights was out and all lights would blink
Replaced the light that was out. Problem fixed
RONALD from WALL TOWNSHIP, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the lights was out and all lights would blink
Put One card in one side and other card on the opposite side, push in on both sides to press in clips that hold light in. Once clips are in light will start to come out unplug light and plug in new light. Push light back in.
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
