Maytag/Maytag_Thumb/BMNFZN05.gif
See part 8 in the diagram
Replacing your Kenmore Dryer Leveling Foot play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Leveling Foot

★★★★★
★★★★★
12 Reviews

Rated by 6 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 11060817990!
 Fits your 11060817990!
PartSelect Number PS1609293
Manufacturer Part Number 49621
Manufactured by Whirlpool
Product Description

Leveling Foot Specifications

If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so that the machine is level, and tighten the locking nuts on the legs that are threaded. Keep the washer as close to the floor as possible. Your model might have rear legs that level themselves, or it might have threaded legs all around. Make sure the rubber feet have not worn out. Replace any missing or damaged legs and feet. This replacement part is sold individually.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Noisy
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Kenmore, Whirlpool, Maytag, KitchenAid.
Part# 49621 replaces these:
AP4295805, 1373044, 2012, 26000688222, 279810, 3392100, 3392100D, 3399694, 40021, 4319350, 49591, 49621, 49621VP, 688222, 8221
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

8 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken
August 23, 2017
How many leveling feet does a wed6400sw1 have? Two or four?I bought it used and it has no front feet ..i didn't look at the back and i want to order them. is the back feet different?thanks!
For model number whirlpool dryer wed6400sw1
Hi Ken, Thank you for your inquiry. Your appliance will need 4 legs. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Phillip
January 31, 2018
How high are the leveling legs?
For model number WGD7300DW2
Hi Philip, Thank you for your question. From what I am seeing in the photo we have for this part on our site, this particular leg is approximately 1.5 inches long. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Nathan
May 7, 2018
Will these feet work with my dryer? I purchased the dryer used and it came with the drawers. I removed the drawer, and it does not have feet on the bottom. How many feet does my dryer need? Thanks.
For model number WED95HEXL1
Hello Nathan, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS1609293. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Steve
June 5, 2019
If I place this model gas dryer on the level floor next to the washing machine, do I need to have the 4 leveling feet inserted into the gas dryer?
For model number WGD8410SW0
Hi Steve, Thank you for your question. To make sure the dryer is level, you will need all 4 feet. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
John
March 8, 2019
How many leveling feet are in a order. One each or four? I also bought my dryer used and did not receive the feet.
For model number AED4370TQ0
Hello John, thank you for your question. The leveling feet are sold individually so there is on in each package. If you did not receive the feet with the new appliance, contact the store it was purchased and speak with them before ordering through us.

Was this helpful?
Thank you for voting!
James
May 6, 2019
If you are using a pedestal under this dryer, do you need the leveling feet?
For model number WED7500GW0
Hi James, thank you for your question. Generally yes. Most of the time what you are supposed to do is screw in the feet as far as they can go so that they are flush with the washing machine. I hope that helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
Kathleen Millett
July 1, 2019
Dryer over heats on all settings. Even when “ no heat” is selected
For model number 110.66972500
Hi Kathleen, Thank you for your question. If the dryer gets too hot on all settings, there are some parts that you will need to check to see which one is causing the issue. You will need to check the thermal fuse, the internal bias thermostat, the thermal cut-off, the high limit thermostat, the heating element and the heating element connection wire. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Chris
September 16, 2019
One leg of the dryer appears to be installed using counter clockwise leg. The frame does not look bent at all. Three people looked at it and it looks formed that way - with the thread backwards to the other three. Is one of the legs actually different? Can i order a reverse threaded foot?
For model number YWED4915EW1
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11770254 and all appear to be the same thread. They are also sold as a set of 4. Hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Part Videos

Replacing your Kenmore Dryer Leveling Foot

Replacing your Kenmore Dryer Leveling Foot play video

Replacing your Kenmore Dryer Leveling Foot

Replacing your Kenmore Dryer Leveling Foot play video
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 6 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
dryer had no heat, all other functions worked
After replacing the heat element as a guess, (which did not fix it), I measured voltage with a DVOM, found lower cut off switch in op, And thanx to some tips on parts select I ordered the the Thermal cut off kit, fast shipping, installed very easily and all is working properly
Other Parts Used:
Thermal Cut-Off Kit
  • Bryan from west valley city, UT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
20 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer stopping during dry cycle.
First I pulled the dryer away from the wall and unplugged it. Next I removed the dryer vent hose and threw it away and replaced it with a more rigid metal vent hose. Next, I used a socket wrench to removed the screws holding on the back cover of the dryer. Once the back cover was off it was just a matter of using the socket wrench to removed the bolt holding the sensor in place. After the part was removed I made sure the replacement was orientated in the same way as the original part and then I unplugged the wires from the bad sensor and placed them in the same order on the new part and then I bolted the new sensor back in place. Since the new part has been installed the dryer is working flawlessly and is not turning off mid-cycle like it was. ***Oh, and an important reminder. When you have the back cover pulled off the dryer use a shop vacuum to suck out any dirt and lint in the back of the dryer and make sure you unbolt the metal chute that the dryer lint screen goes into and clean inside the area near the exhaust blower. This is a VERY IMPORTANT part of servicing your dryer and should be done every few months to help avoid the risk of a fire.****
Other Parts Used:
Dryer Thermal Fuse
  • James from HARTSELLE, AL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
7 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
machine would not agitate properly and NOISY Dryer
took off fabric softener dispenser. used socket to remove agitator. Cleaned and then replaced the little plastic dog ears...works like brand new! It took 15 minutes or less.

Also repaired noisy dryer. replaced drum rollers, pulley and belt. The job took about an hour and was real simple. However..the dryer was still noisy. Fixed with a prybar to force drum to be tighter. It now sounds like brand new.
Other Parts Used:
Idler Pulley Assembly Rear Drum Support Roller Kit Multi Rib Belt - 92-1/4" Agitator Cam Kit
  • Brian from Spencer, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Dryer Did Not Work At All
First removed 8 screws in the back of the dryer to take off the lead 1/4head then removed two blue wires then one screw and you have the thermal fuse . Note: be sure that it is disconected. Before service
Other Parts Used:
Dryer Thermal Fuse
  • Raul from channelview, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
3 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
This dryer still will not heat up.....
And prior to installing all the parts, Thermal Fuse, Cycling Thermostat, High Limit Thermostat, leveling feet, and I even replace the heating element prior to these parts.
Other Parts Used:
Dryer High Limit Thermostat Dryer Thermal Fuse Dryer Cycling Thermostat
  • Jeannie from Reed City, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No leveling feet on dryer.
This could not have been easier. The hardest part was tipping the dryer over on its' side.
Instructions:
1. Tip dryer over onto a non-scratch surface. I used a tarp on the floor.
Insert leveling foot into the foot opening on the bottom of the dryer &
screw in with fingers until it is difficult to turn.
2. Use the adjustable wrench on the hexed foot (not the threads) to adjust to the desired level.
3. Tip dryer upright taking care not to exert pressure on the feet closest to floor. I used a folded-up tarp under the bottom edge of the dryer while lifting it to the upright position.
4. Use a level, back to front & side to side, to determine if feet need further adjustment.
5. Adjustments can be made with the dryer in the upright position, using the adjustable wrench on the hexed foot.
  • Bobbie from BEND, OR
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
12 Reviews
4.9
Filter By Rating:
  • 5 Stars
    11
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1609293
Manufacturer Part Number: 49621
Brand
Model Number
Description
Kenmore
10686294140
Dryer
Kenmore
10686294340
Dryer
Kenmore
10686294540
Dryer
Kenmore
10686294740
Dryer
Kenmore
10686294840
Dryer
Kenmore
10687884100
Dryer
Kenmore
10687884300
Dryer
Kenmore
10687884600
Dryer
Kenmore
11060012000
Dryer
Kenmore
11060012001
Dryer
Kenmore
11060012002
Dryer
Kenmore
11060022010
Dryer
Kenmore
11060052990
Dryer
Kenmore
11060052991
Dryer
Kenmore
11060056990
Dryer
Kenmore
11060056991
Dryer
Kenmore
11060072990
Dryer
Kenmore
11060072991
Dryer
Kenmore
11060092990
Dryer
Kenmore
11060092991
Dryer
Kenmore
11060094990
Dryer
Kenmore
11060094991
Dryer
Kenmore
11060096990
Dryer
Kenmore
11060096991
Dryer
Kenmore
11060097990
Dryer
Kenmore
1106012510
Dryer - ELECTRIC DRYER
Kenmore
11060172000
Dryer
Kenmore
11060172001
Dryer
Kenmore
11060172002
Dryer
Kenmore
11060182000
Dryer

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service