Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Luis
August 31, 2017
Hi, i'll like to know how to perform a thermostat test please. Thank you
For model number FRS6HR45KS4
Hello Luis, thank you for contacting us. Test the thermostat for continuity using a multi-tester set to the ohms setting X1. Start by testing the thermostat out of the freezer when it has come up to room temperature. If the thermostat has two wires, touch one probe to each wire. You should get a reading of infinity. Chill the thermostat in the freezer for about twenty minutes and retest. This time you should get a reading of zero (continuity).
If the thermostat has three wires, number them 1, 2 and 3. Test combinations 1 & 2, 1 & 3 and 2 & 3 and write down the results. Two of the combinations should yield a reading of infinity and one should yield a reading of zero. Now chill the thermostat in the freezer for about twenty minutes and retest. The combination that had a zero reading before, should now have a reading of infinity. One of the two other combinations should now yield a zero reading. If the thermostat fails this test, it should be replaced. Good luck with the repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Dawn
March 11, 2018
Does this thermostat control the condenser fan motor? If not, can you give me the part that does control the fan turning on and off? Thank you!
For model number FRSHB5EHPW1
Hi Dawn,
Thank you for your question. This thermostat is a component of the ice maker. The thermostat you are looking for is the defrost thermostat, part number PS469522. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Donna
April 19, 2018
Freezer cold but does not freezer or produce ice? What could be wrong?
For model number Phls67egsb2
Hi Donna, Thank you for the question. I suggest testing the Defrost Thermostat Kit. The best way to do this is to remove the thermostat from the refrigerator so you can control the temperature of the sensor. You can let the sensor warm up to room temperature. With the sensor warmed up to room temperature the sensor should read approximately 6.2K Ohms at 68°F. With the thermistor submerged is a glass full of ice water, the sensor should be very close to 32°F which should read approximately 16.3K Ohms. If the values that you are getting are far off from these readings, then the sensor is bad and should be replaced. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joseph
July 8, 2021
Ice maker wont dispense water to make ice. If I pour water into the tray-mold the ice will freeze but no new water will come into the tray. I have change the value inlet but still not getting water to the tray.
For model number FFHS2622MS1
Hello Joseph, Thank you for the question. The next thing to check is the water lines and make sure they have not froze over and are blocking the water. If the lines are clear, you may need to replace the Ice Maker as it may not be calling or sending the signal for more water from the Valve. We hope this helps!
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
