Radiant Element with Limiter - 1200W Specifications
This is a six-inch radiant element with limiter. It works in conjunction with your stove top range. The purpose of this part is to heat up the cooking area that is located on top of the range, also known as your stove top. If you suspect that your surface element is not properly heating then you may want to test the element for continuity. This model is sold individually and is 1200 watts. The tools you will need for this installation include a Phillips screwdriver and a 14-inch nut driver.
Ask our experts a question about this part and we'll get back to you as soon as possible!
24 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joan
March 12, 2018
Heating element right ft. Sm element will not heat up at all, do i need to replace the LG element as well, can you tell the parts i need, please, thank you, joan
For model number FEFL79GBA
Hello Joan, Thank you for your inquiry. The right front heating element is a dual element, and the part number you would need to replace is 316464901. Hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Jeff
May 28, 2019
Little to no heat when baking or broiling. The oven probe, broiler element, and bake element have been replaced.
For model number 790.92803015
Hello Jeff, thank you for inquiring. For this symptom you will want to replace the Electronic Control Board part PS3504421.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Leslie
March 15, 2018
How can i test to ensure it is intact the heating element and not a wire that needs to be replaced.
For model number FEF366LSB
Hi Leslie,
Thank you for your question. To verify why the surface burner element is not heating, you will need to check both the element and the burner switch with a multimeter to see which part is causing the issue. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
January 21, 2019
We installed a new eye on the stove and it won't cut off
For model number LGEF3045KFK
Hello Michael, Thank you for the question. This should like the wires may have been installed incorrectly. I suggest checking the wiring to make sure it is correct and secure. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Lynda
March 7, 2019
Top don't heat up, would something be wrong with all the burners? And when I cut the oven on took a while to get to 350, is because of the top not heating up?
For model number LGEF3045KFC
Hello Lynda, Thank you for the question. Since there is no one part that controls all the elements on the cooktop, I suggest checking the wiring. Faulty wiring can also effect the oven. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Sonia
March 29, 2019
Will this part work in a Kenmore stove with model # 790.95411104
For model number 790.95411104
Hello Sonia, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS436590. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Joanna
May 9, 2019
The right front event which is the biggest one won’t heat. What part do i need?
For model number CGEF3055MFD
Hi Joanna, thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Rabiaa
September 17, 2019
I'm looking for this part please if you have a let me know
Hello Rabiaa, Thank you for the question. According to the availability on the site the element is showing to be in stock. If you need assistance placing an order, please contact us at 1-877-910-4611 and we will be happy to help you. Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
April
October 16, 2019
Electrolux cew30ef6gsc wont heat and the buttons on the top panel wont turn on.
For model number CEW30EF6GSC
Hello April, thank you for your question. If the unit will not heat, the issue would be with either the control panel Part #: PS2339294 or one of the electronic control boards. If the top elements will not work but the oven works the board that controls the switches would have to be replaced. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Phil
February 25, 2020
There is no model# on the back of the stove . The service data sheets reference p/n 316259136(0108) + 316255121 rev a about 15yrs old with 4 burners + a warming zone . The front 2 do not heat up / the left says bridge element - the right says expandable element.
For model number Fridgidaire Gallery electric glass top range
Hi Phil,
Thank you for your question. Before we can assist you further, we would need the model number from your range. Here is a link from our website that you may reference on where to find the model number on your appliance, https://www.partselect.com/Find-Your-Range-Model-Number.aspx. We hope this helps. Thank you and have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Part Videos
Replacing your Frigidaire Range Radiant Element with Limiter - 1200W
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
2 elements stopped working.
My husband followed the video instructions and it was easy to fix.
Ruth from MORGANTOWN, WV
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
5 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old element coil burned apart breaking the circuit.
removed the old burner and put the new one in it's place.
James from WARRENTON, MO
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burned out burner
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the different sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!!
Lori from Winter Haven, FL
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
63 of 78 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner knob post busted off....and burner element burned out
My husband opened the oven door.He removed the metal strip at the top just under where the knobs are.I held the top of the stove up while he unscrewed the 2 screws on either side of where the knob goes and he unplugged the connectors on the switch assembly one at a time a reconnected the new ones. We slid the post through the hole and lined up the two holes put the screws back in. Walah. I cont. holding up stove he got a socket to unscrew the strip holding the back elements in place. He undid just the one side used pliers to squeeze clamp together pushed the little post through the slot....unplugged the connectors keeping track of them. He used a screwdriver to unscrew clamps to screw them onto the new element at the same number as he took them off the old element. We popped the new element back in hooking up all connectors poked the little clamp posts through the holes attached the screw that is the strip holding elements in place. We closed the stovetop We lined the metal strip up at top of oven door underneath the knobs and put the 4 screws back in and closed the door. Done. I would say it took maybe 30 min.if that. Works like a champ.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jose M - January 30, 2021
Verified Purchase
Frigidaire electric stove
The part work excellent and it was easy to install after watching the video thank you
★★★★★
★★★★★
Audrey B - May 24, 2019
Verified Purchase
Part works great!
Followed the instructional video and got the part in and working.
★★★★★
★★★★★
Ruth S - April 10, 2019
Verified Purchase
Worked as expected
I wasn’t expecting the parts to come in so quickly and was very surprised and happy they did. The installation was easy and now my stove is working perfectly! Love it!
★★★★★
★★★★★
Gary S - February 21, 2019
Verified Purchase
Easy repair
My stove is back up and working with all the burners. The part was easy to replace.
★★★★★
★★★★★
Bryan B - January 31, 2019
Verified Purchase
Great replacement part
Looked locally for the part but they wanted to charge $40.00 more. Ordered from PartSelect and happy with what I received. If you have questions, watch the online videos on changing the part. I'll order again if I need anything else like this.
★★★★★
★★★★★
Lisa M - January 6, 2019
Verified Purchase
radiant element
When the part finally got here ( fed ex fault ) it was great , and a snap to install after watching video.
Thank you ! Also thank you for tracking updates, and your concern that part was late in arriving
★★★★★
★★★★★
Robert F - December 26, 2018
Verified Purchase
Replace 6” burners on range.
Correct part, delivered as promised, easy to install, instruction video sufficient unto the evil thereof.
★★★★★
★★★★★
Arthur B - December 25, 2018
Verified Purchase
Easy repair
Shipping was a little on the long side but the part worked great, no issues.
★★★★★
★★★★★
William N - November 23, 2018
Verified Purchase
easy repair
The part was correct and easy to change out. Part worked great!
★★★★★
★★★★★
Randall H - October 2, 2018
Verified Purchase
Part was as described
Part was packed good arrived with no damage
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1528719
Manufacturer Part Number: 318178110
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout