Part Location Diagram of 316490000 Frigidaire Temperature Sensor
See part F37 in the diagram
Replacing your Frigidaire Range Temperature Sensor
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Temperature Sensor 316490000

 Fits your CFEF3016VWF!
★★★★★
★★★★★
46 Reviews

Rated by 25 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 41.89
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your CFEF3016VWF!
PartSelect Number PS1528542
Manufacturer Part Number 316490000
Manufactured by Frigidaire for Frigidaire, Kenmore, Electrolux, Crosley
Product Description

Temperature Sensor Specifications

This genuine OEM oven probe is also known as an oven temperature sensor or range probe. This part is manufactured for a range, stove, or oven to detect the temperature within the oven cavity. The probe allows the oven to maintain the set temperature by sensing the temperature and sending the information to the ovens motherboard. You may need to replace this part if oven is not heating or is heating unevenly. Be sure to disconnect power to oven before replacing, as it is an electrical part. Tools needed are 1/4 inch nut driver and needle nose pliers.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Frigidaire Range Temperature Sensor

Replacing your Frigidaire Range Temperature Sensor
Troubleshooting
This part fixes the following symptoms:
Oven is too hot | Little to no heat when baking | Oven not heating evenly | Element will not heat
This part works with the following products:
Range, Wall Oven.
Part# 316490000 replaces these:
AP3963654, 1197392, 316490002, 316490003, 7316490000
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
46 Reviews
4.7
Filter By Rating:
  • 5 Stars
    39
  • 4 Stars
    4
  • 3 Stars
    2
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 25 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Oven temp runaway tempreture, oven light out, sensor was changed for temp drifting low
The light and sensor were straight forward and easy. The EOC was as well but there was one glitch. You have to also purchase the black panel overlay, you cannot use the old one. While the adhesive will still adhere, the keypad is different and REQUIRES the new cover. This would have been good to know when I ordered parts as I did not know until I got the three parts and had to reorder the overlay creating a weeks delay in it's repair.
Other Parts Used:
Light Bulb Oven Electronic Control Board Temperature Sensor
  • Kenneth from LIBERTY, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
slow to get to temperature
first the temperature sensor then the igniter. started to do the igniter by using common sense then I used YouTube which made it a lot faster.
the temperature sensor installs from the back of the stove, the igniter installs from thr front ie, the drawer and inside oven.
  • SHAUN from ALBUQUERQUE, NM
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven temperature was not consistent.
I pulled the oven away from the wall, unplugged the cord, removed the back panel then removed the screw from the old sensor.
  • Kimberly from OWASSO, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven temp was not heating up to desired temp and using an oven thermometer to confirm
moved the range out to access back
removed 5 screws from back panel
removed 1 screw from thermostat installed new one
replaced screws, done in 20 minutes
problem solved
  • philip from CLIFTON, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
F10 Code/ Oven Temperature not working
Removed back panels and removed temperature sensor, which was extremely easy, and replaced with new sensor. Only one hex screw holding it in place.
Replacing control board was surprisingly easy as well. Just take a photo of where all the wires connect (only two to unplug) and use a putty knife to remove the touch pad (doesn’t come with new control board). The touch pad was still sticky so it adhered to the new control board with no issues. Then plugged oven back in. Voilà! Oven worked again!
Other Parts Used:
Range Electronic Control Board Temperature Sensor
  • Emily from MACON, GA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat or sometimes hold heat to set temp
I was able to find the most common reason for my oven's symptom by searching online. I searched for the part I needed but was not confident that I would get the correct part until I looked on partselect.com. After verifying the part number with my owners manual and looking at the video on their website, I decided to order. PartSelect shipped the part as expected, and I was able to install it in less than 30 minutes. The only tool needed for installation was a nut driver. My oven is now working like new.

Many thanks to PartSelect for their comprehensive website and fine service.
  • TRACY from NEW PHILA, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
run away temp
I changed the temperature sensor and tried again. The stove again went on temp runaway and it was suggested to replace control board which is out of stock.
I will have to toss out this stove and buy new as you and no else has this part.
  • James from ELKHORN, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
F10 code going off
Went well, and working thank you ??
  • edward from BRISTOL, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wasn’t heating
Used instruction video & replaced part.
  • Felicia from FORT MILL, SC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had a F31 code which means oven isn't working
Called fridgidaire and they told me the a F31 code means my temperature sensor is not working.
So I ordered one online. I installed it and I still have F31 code and still won't work. So what now? Do I trust them to tell me another part?
  • Terry from CHELSEA, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

37 questions answered by our experts.
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Delano
November 24, 2019
Oven temp won’t go over 250 degrees. It also takes about 30mns to reach that temp.
For model number LGEF3045KFK
PartSelect logo
Hello DeLano, thank you for your question. The most common part that causes that issue is the oven sensor prob PartSelect Number: PS1528542. You can test it with a multi meter. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!

50 people found this helpful.

Was this helpful?
Thank you for voting!
Edward
November 28, 2019
Used the self cleaner on the oven, and now it won't come on to bake. Broiler seems to be working. I have seen posts about a thermal fuse. Any help would be great. Thank you. I would like to repair it myself if possible. Not a good day to happen.....thanksgiving day!
For model number FFEF3017LSG
PartSelect logo
Hello Edward, Thank you for the question. I suggest testing the Oven Probe Sensor, PartSelect Number: PS1528542. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!

16 people found this helpful.

Was this helpful?
Thank you for voting!
Rona
December 24, 2019
My oven does not heat evenly. I had the oven probe (sku# 31690003) replaced but it did not fix the problem.
For model number wfe324lw0
PartSelect logo
Hi Rona, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your elements with a multi meter to see if they are working correctly or not. They should be reading between 0 - 50 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. I hope that helps. Good luck with your repair.

9 people found this helpful.

Was this helpful?
Thank you for voting!
Desiree
October 26, 2021
Hi. Stovetop burners, clock and all displays working fine, but the oven is not coming to full temp. Last night it took over two hours to get to 227 degrees F. Have not seen either element glow orange, but by touch they are definitely heating up some, just not a lot. Have not been able to view bottom element, as one screw is rusted or stripped, and I haven’t been able to get it out yet. Are the heating elements a binary type thing? Are they ever “partially working,” or is it a case of: if they are heating at all, the issue is probably something else? Is it possible that this issue could be caused by a bad temperature sensor? If so, can that be tested without removing? Just trying to figure out what to check next, or what the issue likely is. Thanks so much for any help! Desirée
For model number LGEF3045KFB
PartSelect logo
Hello Desiree, Thank you for the question. This is normally an indication the Sensor is defective. In order to test it, the sensor will need to be removed. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. We hope this helps!

8 people found this helpful.

Was this helpful?
Thank you for voting!
IKE
November 2, 2021
What is the temperature sensor part number and the location of it in the oven?
For model number FGF368GQF
PartSelect logo
Hello Ike, Thank you for your inquiry. We have researched the model number you have provided and show the part number as PS1528542. It is located on the right hand side of your oven. We have included a link to our repair video on installing the part. We hope this helps.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Frank
October 29, 2019
The oven does not start up, replaced element. Still does not start up. Would it be the temp probe ?
For model number 79094142312
PartSelect logo
Hello Frank, Thank you for the question. It is possible the probe is defective. You can test it with a multi meter. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If both elements are not coming on, it is more then likley a defective Electronic Control Board PartSelect Number PS8689401. Hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Pat
December 26, 2019
How do i know if it is an igniter or a sensor? My oven doesn't get hot igniter is orange.
For model number ffgf3023lwd
PartSelect logo
Hello Pat, thank you for your inquiry! We recommend replacing the Oven Bake Igniter if your oven isn't getting hot. If the element shortens out, is no longer glowing, or is only glowing red or orange, replacing the igniter is the solution. I hope this information helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Read
November 7, 2019
My oven will not start after cleaning. The igniter comes on and after about 10 seconds it trips the GFCI. I suspect a thermal fuse, but I cannot find one in the parts list.
For model number LGGF3043KFV
PartSelect logo
Hi Read, Thank you for your question. There is no fuse for this model. According to your owner's manual, where your oven is a self cleaning oven, it cleans itself with high temperatures, which eliminates soils in the oven or reduces them to ash that you may wipe away with a damp cloth. The heat from the oven during the self cleaning may have damaged a wire in the oven that may be causing the breaker to trip. You will need to check with a technician to verify what is causing this issue. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Martin
November 10, 2019
Surface burners and oven is not working but clock setting is working.
For model number FEF368GBA
PartSelect logo
Hello Martin, thank you for your question. The oven control board is what control the oven. If the oven isn't working at all (bake or broil) the electronic board should be replaced. The surface burners are controlled by the infinite switches. We would recommend testing the switches to determine if they are faulty. I hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Amanda
November 23, 2019
Can a temp. Sensor be going bad and still read good on a meter. Oven seems to lose heat and quit working after preheat. Sometimes u can turn it off and on and it will start back working group right everything going else works fine no codes either
For model number Ffef3015pwb
PartSelect logo
Hi Amanda, the temperature sensor is part PS1528542. Thank you for your question and good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1528542
Manufacturer Part Number: 316490000
Brand
Model Number
Description
Frigidaire
00462048A
Range - Range
Frigidaire
00462048B
Range - Range
Frigidaire
00462048C
Range - Range
Frigidaire
00462048D
Range - Range
Frigidaire
00462048E
Range
Frigidaire
20462052A
Range - Range
Frigidaire
20462052B
Range - Range
Frigidaire
20462052C
Range - Range
Frigidaire
20462052D
Range
Frigidaire
20462052E
Range
Frigidaire
30458356A
Range - Range
Frigidaire
30458356B
Range - Range
Frigidaire
30462042B
Range - Range
Frigidaire
30462042C
Range
Frigidaire
30462042D
Range
Frigidaire
40462051B
Range - Range
Frigidaire
40462051C
Range - Range
Frigidaire
40462051D
Range - Range
Frigidaire
40462051E
Range
Frigidaire
40462051G
Range
Frigidaire
40466006B
Range - Range
Frigidaire
40466006C
Range - Range
Frigidaire
40466006E
Range
Frigidaire
40466006F
Range
Frigidaire
40466006G
Range
Frigidaire
60462050A
Range - Range
Frigidaire
60462050B
Range - Range
Frigidaire
60462050C
Range - Range
Frigidaire
60462050D
Range - Range
Frigidaire
60462050E
Range
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service