This is a bake igniter manufactured for an oven, stove, or range burner. It ignites the gas to light the oven burner to bake your food items. If your oven will not heat properly, your igniter could be faulty and you may need to replace it. You can access your bake igniter by removing the bottom panel and burner shield of your oven. Be sure to disconnect power to your appliance before completing this repair because you will be working closely with wiring harnesses. This part is sold separately and is a genuine replacement part sourced from the original manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Gas igniter glows | but will not light | Little to no heat when baking | Will Not Start
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Hans S - January 4, 2023
Verified Purchase
The right part with video instructions to install.
This is the second time my oven igniter broke. Both times Part Select had the right part with clear replacement instructions.
★★★★★
★★★★★
Paul D - November 21, 2020
Verified Purchase
This was an easy repair - your video on replacing the oven’ ignitor was a great help.
The delicate Ignitor was packaged well . Only took my wife and I only 30 minutes to install. The chocolate chip cookies were perfect.
★★★★★
★★★★★
Marie R - May 29, 2020
Verified Purchase
Success
Thanks to the ease of ordering this part and a bit of help from the internet- I saved. i can keep my stove for another 15 years -hopefully
Kim
★★★★★
★★★★★
Donna H - May 11, 2019
Verified Purchase
What was needed
Fixed oven myself without the cost of a repair person
★★★★★
★★★★★
Kathy H - April 1, 2019
Verified Purchase
Easy repair. Was fixed in 30 minutes.
The part arrived within a week and my oven was fixed in 30 minutes. This was a good experience and I would definitely order again.
★★★★★
★★★★★
April V - February 2, 2019
Verified Purchase
worked
Part after reordering it from the first order part came broken. but now is great
★★★★★
★★★★★
Rudson E - January 19, 2019
Verified Purchase
Part worked eell
Worked weee
★★★★★
★★★★★
Steven A - January 1, 2019
Verified Purchase
igniter
after receiving the first igniter in pieces / having to reorder another due to the shipper improperly packaged. I aim still waiting for there refund of my money for the first one. 1/1/19.
the second one did work fine.
★★★★★
★★★★★
Daniel G - November 15, 2018
Verified Purchase
Should have been notified if you didn't have the part.
Paid extra for 1.9 days shipping. Came 7 days later. For the money I spent eating out. I could have bought a new stove.
★★★★★
★★★★★
Dan B - October 25, 2018
Verified Purchase
Baking Igniter
very much perfect fit !!
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 6 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven would sporadically light when initially turned on
Watched the you tube video from this website and did the same to my own oven. Much better replacement igniter than was installed in oven from factory and amazing packaging from partselect.com. Thank you!
Jessica from PITTSBURGH, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
This is stove and convection oven Baker igniter
Had to pull back off due plug in for bake Ignitor is on bottom right Conner , mfg ill design , part was is to install after that. Parts select is great to deal with first part showed up damage due to shipping , parts select sent another with better packaging , works great have used them in the past for Ref ice maker parts . Due it yoursel
... Read moref save money
Read less
james from CROSBY, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake Igniter Burned Out
I watched the very simple video on the bottom of the parts page and prepped all the tools...You will need a small wrench or similar tool... but it was SOOOO simple! I like fix it projects, but working with a gas oven had me a bit nervous...after the video, I thought, this will be easy! It was super easy! My hubby didn't even have to help
... Read moremuch! I also took the time to clean the oven before changing the part, so it seems like a brand new oven! I will order from Parts Select again anytime!
Disconnected power, I removed the igniter from oven. Measured the resistance (275 ohms) and then the current draw. DO NOT ATTEMPT THIS UNLESS YOU ARE ABLE TO ACCOMPLISH THIS SAFELY. I made a harness and connected the old igniter to 110 V ac, Current draw thru the meter settled at 2.7 Amps. Too weak to fully open gas valve. Valve require
... Read mores 3.2 - 3.6 amps to fully operate properly. New igniter measured 300 ohms and current draw was 3.4 amps. Installed new part and everything works fine. Correct part and good service from this site
Read less
John from PORT JEFF STA, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
10 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The oven would not ignite on bake setting
After reading a lot of reviews online, I came to the conclusion it was the bake igniter. The "glow rod" would glow but would not ignite the oven. The broiler would ignite and the top burners would work. I removed the racks, took a screwdriver and removed the 2 screws in the back corners. I then slid the bottom shield towards the back then
... Read more lifted up and the shield came off and exposed the flame shield. I removed the screws the hold that in place on the front of the oven with my 6 way screwdriver. I used the nutdriver part. Lifted that off which exposed the the actual flame tube and bake igniter. There were two screws, used the nutrdiver on the 6 way screwdriver, holding the bake igniter on. The screws are on the side of it. Removed those and the igniter came free. I pulled out the warming drawer and followed the wire from the igniter to a wiring harness. Pulled that apart and pulled the whole thing out through the oven. Got the new part, reversed order of removal. Fired right up. Pretty pricey part. But, saved 500+ dollars for a new range. Actual removal and install of new part, maybe 20 minutes if that. Super easy.
Read less
Michael from NOBLESVILLE, IN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
16 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't heat - broiler and burners worked fine-Bake Burner Igniter didn't work
It was the week before Thanksgiving and we didn't know what to do without an oven. I did some research on Google and of all the websites out there, I found a decent price here at Parts Select and ordered it on Friday. I was shocked when FEDEX pulled up to the door on Saturday afternoon. I went online to youtube and found a step by step
... Read more video specifically for this part. It's posted by the Repair Clinic. http://www.youtube.com/watch?v=cLxKoF16gac. I was able to fix the part and probably saved at least $150.00 for a service call and repair time. The part cost about $90 and I was done in less than 15 minutes. We just got this stove about 2 years ago and I'm thinking maybe we could have saved my old stove since it had the same problem. Great job Parts Select - I got just what I needed and saved a ton of money in the process. Thanks also for their great informative video online. We had a great Thanksgiving and were very thankful for all our hot food fresh from the oven.
Read less
Debbie from Rockford, MI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
187 of 226 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
16 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
March 10, 2018
Oven will not heat up. Top burners work fine. Control panel gives a code f31. Is this the bake ignitor?
For model number TGF351ESC
Hello Chris, Thank you for your inquiry. This error code usually indicates an issue with the oven temperature sensor. You can check the sensor with a multimeter for continuity. The normal resistance reading at the room temperature should be about 1100 Ohms. If the reading is correct, check the wires between the probe and the control board, including all plugs. If there is nothing wrong, check the control board. Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Jan
October 22, 2019
Oven does not light, smell gas. However, all burners and broiler work. Is it the oven/bake igniter? What part is needed? Thanks
For model number GLGF386DCC
Hello Jan, thank you for inquiring. This is most likely due to a faulty Pressure Regulator, part number PS438464 for your model range. You may also want to consider this Bake Igniter, part number PS1528534 as the cause. You can test the ohms of resistance for the Bake Igniter with a multi-meter. It should read as about 1100 ohms to be functioning correctly. Good luck with your repair!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Vicci
January 7, 2019
My burners work, the self cleaner works, oven doesn't come on, broil doesn't come on..
For model number fgfl79dbf
Hello Vicci, thank you for your question. If just the broil doesn't light, we would recommend replacing the igniter first, which is PartSelect Number: PS1528535. When the broil option doesn't light, but the bake does, this usually means the igniter itself is bad. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jimmy
January 29, 2019
Oven will not lite top burners works getting a f13 code
For model number FGFL79GSA
Hello Jimmy, Thank you for the question. The F13 Error code indicates an issue with the Control Board Part Number: PS3497852 and that it will need to be replaced. Hope this helps, good luck with this repair!
Oven will not heat up. All burners on the stove are still working great. Would this issue mean that the oven igniter needs replaced? Or could it be something different? Thanks so much in advance.
For model number FGF368GQA
Hi Trisha, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your igniters with a multi meter to see if they are working correctly or not. They should be reading between 0 - 1100 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board or the spark module. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jan
October 23, 2019
Broiler ignites, oven does not.
Hi Jan,
Thank you for your question. If the oven is not igniting, the issue could be the bake igniter. To verify the correct bake igniter for your appliance, we would need the model number from your oven. Here is a link from our website that you may reference on where to find the model number on your appliance, https://www.partselect.com/Find-Your-Range-Model-Number.aspx. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tara
February 27, 2020
Neither the oven nor the broiler turn on. There is no gas smell that i can discern. The stovetop works fine.
For model number TGF351ESB
Hi Tara, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your igniters with a multi meter to see if they are working correctly or not. They should be reading between 0 - 1100 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board or the spark module. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
August 26, 2023
Igniter glows on bake but oven doesn’t light. Broiler and top burners work. Is my problem the igniter or something else?
For model number FGFLZ87GCA
Hi Paul, thank you for getting in touch. We have found that your bake igniter, part number PS1528534, may be faulty. The bake igniter ignites the gas to light the bake burner. It is recommended to replace the bake igniter to fix this issue. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Earl
March 9, 2024
Can the Bake Igniter still light entirely and be faulty, meaning it will NOT ignite?
For model number FPGS3085KFG
Hello Earl, thank you for contacting us. According to our research, the igniter can still glow and be faulty. We would recommend checking the igniter carefully. If the igniter is fine, then the issue is most probably with the safety valve, part number PS1150314. It controls gas flow to the bake and broil burners in the oven. You may need to replace it to solve the problem. Glad to be of assistance!
My top ranges work and my boiler works. But my oven will not work. Is the problem most likely the igniter? Also can you use a similar igniter from different Kenmore oven?
For model number 79078618502
Hello Jamie, Thank you for the question. We can only verify the parts listed for this model number sorry. I suggest testing the bake igniter PartSelect Number: PS1528534. They should be reading between 0 - 1100 ohms to be working correctly. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
