Temperature Sensor 297110400

Hi Bonnie, Thank you for your question. This would not be the correct sensor for your refrigerator. The part number listed under your model number for the temperature sensor is PS1765215. It detects the temperature inside the refrigerator and sends information to the electronic control. I hope this helps. Thank you and have a great day!

Hello Booker, Thank you for your question. If the refrigerator is not cooling, there are some parts that you will need to check to see which one is causing the issue. You will need to check the defrost timer, the control kit, the defrost thermostat, the filter-drier, the evaporator fan motor and the defrost heater. I hope this helps. Thank you and have a great day!

Hello Brad, thank you for writing. It should read around 16.6 K ohms or 16,600 ohms +/-5%. If you don't own an ohmmeter or are unsure how to properly use it, replace the sensor PartSelect Number PS1527511 if you suspect they are bad. Also, check the Electronic Control Board PartSelect Number PS3493013. Good luck with your repair.

Hi Kevin, thank you for your inquiry. According to our research, if everything you mentioned is working fine, then the issue is probably with the temperature sensor, part number PS1527511. If that does not help, replace the control board, part number PS12705248. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!

Hello Dan, thank you for the question. We would recommend checking the compressor start relay, part number PS11757755, to fix the issue. We hope this helps!

Hello Ray, thank you for reaching out. Based on our understanding of the issue, we would suggest checking the temperature sensor, part number PS1527511, to fix the issue. Glad to be of help!

Hello John, thank you for your question. When you are having temperature problems in your fridge, there are a few parts that could cause the issue. You can use a multi meter to test most of the parts. Make sure you cut power to your appliance before doing any repairs or tests. First you should test your defrost thermostat, part number: PS1525674. Place the thermostat in ice cold water for 2-3 minutes after removing it from your appliance. It should be reading 0 ohms to be working correctly. Another part to check would be your defrost heater, part number: PS426768. Remove it from the appliance. It should be reading anywhere between 0 - 50 ohms to be working. You could check your temperature sensor, part number: PS1527511. To find the correct reading for this part you will have to refer to your tech sheet that comes with your appliance. You can usually find this tech sheet behind the bottom grille of your fridge on either the right or left side. These are the most common parts that cause this issue in your appliance. So, it is suggested you check them first. I hope that helps. Good luck with your repair.

Hello Douglas, Thank you for the question. The Temperature Sensor tells the controls board what the temperature is inside the appliance. If the display is accurate with the temperature inside the appliance, the Sensor is good. We hope this helps!

Hello Jose, Thank you for your inquiry. The E9 error code indicates that the temperature sensor or temperature control. We recommend testing your sensor with a multimeter to see if it has continuity. You can also test the defrost thermostat. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair.

Hello Gerardo, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS1527511. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!