Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Theodore R - November 21, 2019
Verified Purchase
Ice door spring
Spring was a direct fit....worked well and now the ice door is fully closing and operating correctly!
★★★★★
★★★★★
Gorden W - October 10, 2018
Verified Purchase
I Still haven't received it!
My refrigerator is still broken. I ordered this part over a month ago, and still haven't received it! I did a tracking check and it shows "Pending" (You will be notified when this part moves). SO... PartSelect....If you would DO a big favor.... PLEASE see about shipping my part!
October 10, 2018
Hello Gorden, Thank you for contacting us today. The tracking now shows Scheduled delivery:
Thursday 10/11/2018 by end of day. Hope this helps!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
ice maker wouldn; dinspense ice'
removed ice denspenser and replaced spring and flap'
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
April 5, 2019
When you put drinking glass against lever for ice or water, when glass removed you have to pull plastic lever out to shut off ice or water flow! I don't see any spring that pushes lever out to shut off ice or water. Currently using index finger behind lever so when finished the water or ice stops flowing. It used to work fine. How do I fix the problem? Thanks Jim
For model number FGHC2331PF6
Hello Jim, Thank you for the question. This sounds like an issue with the lever, The part is only sold as part of the Dispenser Assembly, PartSelect Number PS8692021.Thank you for your inquiry, good luck with this repair!
My issue is as follows. On the ice dispensing part of this fridge there is a little round black disk/door above the ice dispensing lever. When the lever is pushed, the door opens and ice comes out. It is not resetting itself allowing warm air (room air) to enter into the ice making section of the freezer causing frost to build up and also allows the ice in the dispensing shoot to warm up a bit and form large chunks of ice that prevents the dispensing parts from moving. Everything freezes up. I looked on the parts diagragm however i am not sure as to which parts would i need to purchase that will allow this door to reset after each time ice is dispensed. Hope someone can guild me on this
For model number PHS69EJSS2
Good Day Scott. Thank you for your question in regards to your unit (Model Number PHS69EJSS2). Based on our research ice may have melted and frozen around auger due to infrequent use, temperature fluctuations, and/or power outages. The solution to this that is provided by the manufacture is as follows: Remove ice container, thaw, and empty the contents. Clean container, wipe dry, and replace in proper position. When new ice is made, dispenser should operate. Hope this helps. Best Regards.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
