Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Arnulfo T - May 16, 2019
Verified Purchase
Great part
Part came in fast and good condition, works awesome.
★★★★★
★★★★★
Steve B - March 20, 2019
Verified Purchase
Easy repair
Fast shipping. Works great
★★★★★
★★★★★
Donald R M - March 14, 2019
Verified Purchase
Ribbon
Have Never gotten it. I ordered it Feb.15 shipped Feb.28
March 15, 2019
Hi Donald,
Thank you for contacting us regarding this situation. Please accept our apologies that you have not received your order yet. We have contacted you by email to provide you with information on your order.
★★★★★
★★★★★
Patricia S - January 17, 2019
Verified Purchase
Easy repair
Part came in and appliance repaired.
★★★★★
★★★★★
Anthony L - December 6, 2018
Verified Purchase
No ice and no water from the dispenser.
I removed the top part of the buttons (Just lift up) and removed the damaged ribbon. I removed either 4 to 6 small ( really small) screws. I removed the piece of flat plastic, unlatched the ribbon from the part I removed, clipped in the new one and locked it in. Prlaced the 4-6 small screws and plugged in the ribbon to the fridge door. Reclipped the top part of the dispenser to the door......and it worked great. I've had to replace the ribbon in the dispenser 2 other times. So fast and easy repair....it's now back inservice and works great.
★★★★★
★★★★★
Joseph J - December 3, 2018
Verified Purchase
Great Part
This ribbon cable was a direct fit. My family missed having filtered water and ice from the frig. This was a really good price for the part. Fast shipping. This is the 4th part I have order through this comapany and high recommend them. Signed a happy return customer. Thanks.
★★★★★
★★★★★
Steven H - September 14, 2018
Verified Purchase
Easy Repair.
The part was exactly what I needed.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 6 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Faceplate for icemaker fell off, breaking ribbon cable
Ordered new ribbon cable. At first I couldn't figure out how to get the wide end of the ribbon cable off, and I took the whole inner circuit board out - in fact, all it needed was more muscle, a straight pull out, no clips or anything holding it in other than friction. The narrow end attached to the control button board has two clips whic
... Read moreh pull towards you to loosen the ribbon. Easy install, worked perfectly
Read less
Wayne from MARLBOROUGH, MA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice and Water dispenser stopped working
I had to remove the face cover to gain access to the ribbon harness, also had to remove the push pads The ribbon is a delicate item so care had to be taken not to bend the ends. The ribbon can fit either side so getting it in place to make contact was kind of tricky. After the ribbon was in, it just a matter of putting things back togethe
... Read morer. Dispenser is fixed at a minimum cost, ribbon was shipped within 2 days which was great. Thanks to Part Select for easy to find on the net, had a complete diagram of the refrigerator ice/water dispenser so finding the parts needed was simple. Doug
Read less
Doug from SUMNER, MI
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No power to Ice and water dispenser
First removed the drip tray with a firm tug, Then removed the 2 screws to remove the trim, had to remove the board to get get to the connector. (there is a clip that holds the wire tight) connected the new ribbon cable and secured it with the clip, screwed the board back in and pushed in the other end of the cable. and screwed the trim
... Read moreback and the drip tray. surprisingly Very easy to do.
Read less
Carmelo from Howell, NJ
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
22 of 36 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Husband pushed water to hard and though it was the ice maker
Just pluged it in
Thelma from Hickory, NC
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
4 of 20 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had had a repairman look at the problem, and he estimated the cost of the repair to be $225 to $500. Needless to say I was quite happy that I was able to do it myself for $85.
I found that getting the water/ice dispenser back in place was the hardest part because the water hose is so short. I finally threaded a stiff wire up into the hose and guided it through the dispenser opening. The rest was pretty much routine.
replace the ribbon cable for the water/ice dispenser
I replaced the paddle for the water dispenser in the refrigerator and in that process the ribbon cable shorted out from the bending and the electricity did not go through so I ordered a new ribbon cable which was easy to install.
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ron
January 12, 2018
Ice and water dispenser button panel fell off and ribbon cable separated. Tried inserting it, but the panel light come on and ice dispenser starts running and will not turn off until i remove the cable. Do i need a new ribbon cable?
For model number GLHS69EHSBO
Hello Ron, Thank you for your inquiry. You can check the cable with a multimeter. You can also test the panel as well. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
John
April 11, 2018
How do i install this part
For model number 241680002
Hello John, thank you for your question. You will need to remove the drip tray from the dispenser, first. Once that is removed there will be two screws visible to remove the front trim. Once the trim is removed, the control board will have to be removed to get to the connector. There is a clip that holds the ribbon in place. Once the ribbon is removed, and the new one installed, the board can be screwed back into place, then the trim and the drip tray. There are other repair stories on our site under the part number 241680002 that might help you out as well. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Deea
August 28, 2019
Front door ice and water button panel fell off and disconnected the cable wire from the panel. When I reconnected the cable wire to the button panel, the power came on, the ice maker and the light worked, but the water dispenser did not function. Will a new cable wire solve this problem?
For model number FRS6LF7JW3
Hi Deea,
Thank you for your question. A new cable may resolve this issue. I would check both the cable and the control panel with a multimeter to see which part is causing the issue. Here is a link to one of our videos on YouTube that you may reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Daniel
December 11, 2022
I’m trying to replace the ribbon cable harness on the fridge . But which ribbon is recommended?
For model number Fridgiare 241691315
Hello Daniel, thank you for your question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, we recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. We hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kathy
March 21, 2018
There was no power to the ice/water dispenser. I took it apart and hooked it back up. I just keeps dispensing ice. The agitator won't stop. Help.
For model number FRS6LF7JW0
Hello Kathy, Thank you for the question. The Dispenser Switch Board, PartSelect Number: PS1526487 sounds like it is defective and will need to be replaced. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
![](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/346995-1-S-Whirlpool-341241-Multi-Rib-Belt-92-1-4-amp-quot.jpg "Multi Rib Belt - 92-1/4" – Part Number: 341241")
