Frigidaire/Frigidaire_Thumb/O12QQKWZ.gif
See part F38C in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Ribbon Cable Harness

★★★★★
★★★★★
7 Reviews

Rated by 6 customers 

A Bit Difficult 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 25344333603!
 Fits your 25344333603!
PartSelect Number PS1526364
Manufacturer Part Number 241680002
Manufactured by Frigidaire
Product Description

Ribbon Cable Harness Specifications

Used in the dispenser board area.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Not dispensing water | Ice maker won’t dispense ice | Light not working | Ice maker not making ice
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Westinghouse.
Part# 241680002 replaces these:
AP3965169, 1196633, 241680001, 241701201, 5304430811
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

5 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ron
January 12, 2018
Ice and water dispenser button panel fell off and ribbon cable separated. Tried inserting it, but the panel light come on and ice dispenser starts running and will not turn off until i remove the cable. Do i need a new ribbon cable?
For model number GLHS69EHSBO
Hello Ron, Thank you for your inquiry. You can check the cable with a multimeter. You can also test the panel as well. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
John
April 11, 2018
How do i install this part
For model number 241680002
Hello John, thank you for your question. You will need to remove the drip tray from the dispenser, first. Once that is removed there will be two screws visible to remove the front trim. Once the trim is removed, the control board will have to be removed to get to the connector. There is a clip that holds the ribbon in place. Once the ribbon is removed, and the new one installed, the board can be screwed back into place, then the trim and the drip tray. There are other repair stories on our site under the part number 241680002 that might help you out as well. I hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Deea
August 28, 2019
Front door ice and water button panel fell off and disconnected the cable wire from the panel. When I reconnected the cable wire to the button panel, the power came on, the ice maker and the light worked, but the water dispenser did not function. Will a new cable wire solve this problem?
For model number FRS6LF7JW3
Hi Deea, Thank you for your question. A new cable may resolve this issue. I would check both the cable and the control panel with a multimeter to see which part is causing the issue. Here is a link to one of our videos on YouTube that you may reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Daniel
December 11, 2022
I’m trying to replace the ribbon cable harness on the fridge . But which ribbon is recommended?
For model number Fridgiare 241691315
Hello Daniel, thank you for your question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, we recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. We hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Kathy
March 21, 2018
There was no power to the ice/water dispenser. I took it apart and hooked it back up. I just keeps dispensing ice. The agitator won't stop. Help.
For model number FRS6LF7JW0
Hello Kathy, Thank you for the question. The Dispenser Switch Board, PartSelect Number: PS1526487 sounds like it is defective and will need to be replaced. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 2.8 / 5.0, 6 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
replace the ribbon cable for the water/ice dispenser
I replaced the paddle for the water dispenser in the refrigerator and in that process the ribbon cable shorted out from the bending and the electricity did not go through so I ordered a new
ribbon cable which was easy to install.
Other Parts Used:
Multi Rib Belt - 92-1/4"
  • Mike from Mantua, NJ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
38 of 73 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No power to Ice and water dispenser
First removed the drip tray with a firm tug, Then removed the 2 screws to remove the trim, had to remove the board to get get to the connector. (there is a clip that holds the wire tight) connected the new ribbon cable and secured it with the clip, screwed the board back in and pushed in the other end of the cable. and screwed the trim back and the drip tray. surprisingly Very easy to do.
  • Carmelo from Howell, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
22 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had had a repairman look at the problem, and he estimated the cost of the repair to be $225 to $500. Needless to say I was quite happy that I was able to do it myself for $85.
I found that getting the water/ice dispenser back in place was the hardest part because the water hose is so short. I finally threaded a stiff wire up into the hose and guided it through the dispenser opening. The rest was pretty much routine.
Other Parts Used:
Water Dispenser Actuator
  • Gary from Floresville, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
18 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice and Water dispenser stopped working
I had to remove the face cover to gain access to the ribbon harness, also had to remove the push pads The ribbon is a delicate item so care had to be taken not to bend the ends. The ribbon can fit either side so getting it in place to make contact was kind of tricky. After the ribbon was in, it just a matter of putting things back together. Dispenser is fixed at a minimum cost, ribbon was shipped within 2 days which was great. Thanks to Part Select for easy to find on the net, had a complete diagram of the refrigerator ice/water dispenser so finding the parts needed was simple. Doug
  • Doug from SUMNER, MI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Husband pushed water to hard and though it was the ice maker
Just pluged it in
  • Thelma from Hickory, NC
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
4 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Faceplate for icemaker fell off, breaking ribbon cable
Ordered new ribbon cable. At first I couldn't figure out how to get the wide end of the ribbon cable off, and I took the whole inner circuit board out - in fact, all it needed was more muscle, a straight pull out, no clips or anything holding it in other than friction. The narrow end attached to the control button board has two clips which pull towards you to loosen the ribbon. Easy install, worked perfectly
  • Wayne from MARLBOROUGH, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
4.4
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1526364
Manufacturer Part Number: 241680002
Brand
Model Number
Description
Kenmore
25344302400
Refrigerator
Kenmore
25344302401
Refrigerator
Kenmore
25344303401
Refrigerator
Kenmore
25344303402
Refrigerator
Kenmore
25344303403
Refrigerator
Kenmore
25344304400
Refrigerator
Kenmore
25344304401
Refrigerator
Kenmore
25344309400
Refrigerator
Kenmore
25344309401
Refrigerator
Kenmore
25344333600
Refrigerator
Kenmore
25344333601
Refrigerator
Kenmore
25344333602
Refrigerator
Kenmore
25344333603
Refrigerator
Kenmore
25344333604
Refrigerator
Kenmore
25344333605
Refrigerator
Kenmore
25344333606
Refrigerator
Kenmore
25344333607
Refrigerator
Kenmore
25344333608
Refrigerator
Kenmore
25344333609
Refrigerator
Kenmore
2534433360A
Refrigerator
Kenmore
25344382400
Refrigerator
Kenmore
25344382402
Refrigerator
Kenmore
25344382403
Refrigerator
Kenmore
25344382404
Refrigerator
Kenmore
25344382405
Refrigerator
Kenmore
25344382406
Refrigerator
Kenmore
25344382407
Refrigerator
Kenmore
2534438240B
Refrigerator
Kenmore
25344383400
Refrigerator
Kenmore
25344383401
Refrigerator

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service