The door strike on your washing machine allows your washer door to lock properly, and operate efficiently. If you notice that your washer door will not open or close, leaks or the washer will not start or spin, you may need to replace the door strike. This part is for front load washers and is white in color. The part is made of plastic and is roughly 2 inches in length. To complete this repair, you will only need a Phillips screwdriver. Most of our customers found this repair to be easy and took less than 15 minutes to complete it. This part is sold individually, not as a part of a kit, and is a genuine part approved by the original manufacturer.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Washer Door Strike
Troubleshooting
This part fixes the following symptoms:
Lid or door won’t close | Will Not Start | Door won’t close | Leaking
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Darlene D - August 3, 2023
Verified Purchase
It worked!
I was hoping the new latch would resolve the water leakage problem from the door of the washer. It did!!!! Thanks for the quick delivery.
★★★★★
★★★★★
JEANETTE C - July 29, 2023
Verified Purchase
Easy repair
Our first reaction was to call a repairman. After seeing what broke, we looked online and found the part immediately. The video made it easy to fix and saved us a lot of money. Thank you!
★★★★★
★★★★★
Lasona J - October 13, 2022
Verified Purchase
Broke again
I was hoping it would last a little longer. It only lasted 2 months.
January 9, 2023
Thank you for your review. We're sorry to hear that happened, we will be in touch soon to help fix this issue as we have a 1 year warranty on all of the parts we sell.
★★★★★
★★★★★
Karl E - May 18, 2022
Verified Purchase
Easy repair, perfect fit
This part was for a washing machine that would not operate without it. We live in a remote location and there was no local repair service available. I ordered the part and it was delivered in four days. Installation took five minutes and it worked perfectly. The family is pleased to have a working washing machine !!!
★★★★★
★★★★★
Jose N - March 31, 2021
Verified Purchase
Good part
It is a very good part
★★★★★
★★★★★
Orlando L - January 12, 2021
Verified Purchase
Easy repair which took 20 seconds
Part was exactly what was needed.
★★★★★
★★★★★
Phillip M - December 17, 2020
Verified Purchase
Easy Repair! Had No problem.
Part came within time expected and all is fine!
★★★★★
★★★★★
Todd F - October 29, 2020
Verified Purchase
Easy repair
Part was delivered faster then advertised and it is good quality
★★★★★
★★★★★
Joanne G - September 2, 2020
Verified Purchase
Easy Fix
It took me two minutes to replace the door strike. Problem fixed
★★★★★
★★★★★
Colleen P - September 2, 2020
Verified Purchase
Easiest repair EVER
a screw driver is all you need . Remove 2 screws take old piece off. Put new piece on and secure with the 2 screws you removed. Done! And i was worried thus repair required a technician and a big price tag. Boy was I way off!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 38 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Damage inner and outer door frame. Normal wear and tear Damsge
Followed the youtube video step by step. Very helpful video. Be careful of hinge screws. They are very easy to strip. Had to buy a special tool to remove stripped screws. Advice go ahead and purchase the 4 screws. 3 for the hinge and 1 for spare. Rest of the repair was easy. Less than an hour to complete.
The small plastic piece broke that locked the door.
Screwed the new part back into place.
Tami from INDIANAPOLIS, IN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Latch broken. New part installed as per repair video - no problems.
New part installed as per repair video - no problems.
Donald from PHOENIX, AZ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken door lock assembly
Turned circuit Off at breaker panel Extracted metal seal ring from tumbler seal,loosened/extracted 2 screws holding assembly,pulled 2 wires,Reversed sequence with New lock assembly,made sure tumbler seal was seated securely,turned breaker on,tested,Complete!
My 10 yr old son removed the two screws, placed the new strike on, and screwed it back into place!! So easy a child did it!!
Michelle from FORT STOCKTON, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The only problem was that the drive belt was so tight that it was two inches short from the drive shaft making it very difficult to put on by hand.
I did my best to stretch the belt out and as I wrapped it around the pulley one hand was preventing the belt from slipping off and the other hand had the screwdriver to use as Leverage to stretch and slip the belt on the other side of the pulley. One thing that I saw but didn't try was to use zip ties to temporarily hold the belt in place
... Read more so it didn't slip off that may have helped.
Easy fix for a verry poor designed door catch. Almost purposeful on the manafactures behalf to make it out of cheap plastic Remove 2 screws replace install 2 screws
William from ROY, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Door Strike
Very basic replacement- 2 screws in and out. The part did not come with screws to be sure to save them if you remove the broken part ahead of time to make the process smoother.
Jessica Ramaker from SAINT PAUL, MN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Catch on door strike broke.
Removed and replaced two screws.
Mildred from LOVINGTON, NM
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Error code was flashing DR which meant door failed to Lock and unit wouldn't start
I started with a Phillips head Screw driver and removed the screws from the current Door strike and replaced with a new one. To replace the Door Lock and switch assembly I had to access the right portion of the door gasket which was a little tricky, as it has a wire ring around the gasket to keep it in position. It has never been removed
... Read more so it was fairly stuck so I took some pliers to pull on the gasket and ring to loosen it up. Once I got it off I was able to remove the Gasket just enough to access the electrical components to the Switch assembly. I loosened the screws on the current switch assembly using a Phillips head screw driver and removed it through the access point then unplugged the current wiring harness from the switch assembly and plugged the new switch assembly in. Then I tightened up the screws on the new switch assembly. re attaching the gasket was possibly the most time consuming as there is a metal lip on the door itself that the gasket has to wrap around in order to re attach the metal ring and hold everything in place. I took a flat head screw driver and ran it along the edges of the metal lip while pulling the gasket to secure it around the lip then I wrapped the metal around the gasket to secure it to the metal lip in the door ( Note: the metal ring has a spring that should be positioned at the bottom of the door once it's installed correctly, you will notice the gasket is shaped at the bottom to allow for the spring) Once I completed that I made sure all screws where tightened and then checked the unit to be sure it worked properly. It is working perfectly and no more error message.
Ask our experts a question about this part and we'll get back to you as soon as possible!
17 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charles
November 11, 2017
Any suggestions on how to get the broken piece of stryker out of door latch kit???
Hi Charles,
Thank you for your inquiry. You may have to remove the catch to take the broken striker out. Please consult your owner's manual for further instructions. I hope this helps. Thank you and have a great day!
20 people found this helpful.
Was this helpful?
Thank you for voting!
Raymond
January 8, 2018
I glued the broken striker hook and try closing it but it wont start and make a noise. By using a new striker will it be ok
For model number ATF6000FS1
Hi Raymond, Thank you for the question. If the striker is broken I would recommend having it replaced. Glue will not be able to hold it securely. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
January 18, 2019
My front load washer door will not stay shut. The catch does not appear to be broken but could possibly be worn. Would this cause the door not to catch
For model number 41741122410
Hi Bill,
Thank you for your question. It is possible that the catch is worn, but the problem could also be either the door strike or the door hinge. You will need to inspect the parts to see which one is causing the issue. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Greg
February 13, 2018
My washer has power it will latch but all it does is hum and every now and then it clicks like it's powering to something but won't do anything could that possibly be the door latch
For model number Ftf2140fs1
Hi Greg,
Thank you for your question. There are some parts that you will need to check to see which one is causing the issue. You will need to check the door lock and switch assembly, the door strike, the control board with housing, the drain pump and the motor control board. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Sari
July 25, 2019
I forgot to tell you that this all happened after the building shut off the water for two days during the day and back on in the evenings, to change a section of the main pipe. My washer was working fine before that. Last time the water was shut off in the building no one was notified and i ran my washer not knowing that there was no water to the appliance. My washer broke and it was the door lock. This time, many units including mine, had debris in their fixtures etc. The plumbers came back and bleed the lines and cleaned out the screens from several fixtures. They also did that to my washing machine line, but that did not fix anything. Why is it always defaulting immediacy to no spin???
occasionally it will give a tiny bit of water, but mostly it wont do anything but them nothing else. it will not actually start other than to except provide the panel lights and clicking sounds. it will not drain, it will not fill, it will not spin. and it always defaults, within 15 seconds to no spin.
hello sari, thank you for the question. i suggest testing the door lock and switch assembly, partselect number ps12364048 with a multi meter for continuity. your washer will not start if the door does not lock and if defective it will think the door in unlocked. hope this helps!
For model number Frigidaire LTF2140FS1
Hello Sari, thank you for your question. If the water was turned off and other tenants had plumbers come and clean out the screens there is probably an accumulation of dirt and debris in the water valve. That is why the unit won't start. There is no water to the unit. We would recommend replacing the water valve as you're not getting any water and after 15 seconds of trying to fill it will automatically go to no spin then stop. We would recommend replacing the valve, which is PartSelect Number: PS2330891. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ssari
July 25, 2019
Can running the machine with no water available to the unit cause the unit to break, specifically the door latch?
For model number LTF2140FS1
Hello Ssari, Thank you for the question. I have not heard of it affecting the door latch but it can burn the water valve out and cause a short damaging other electrical parts within the appliance. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Sue
October 18, 2021
Hi the washer will run but it makes noise. When you go to open the door it seems loose. I have checked all the screws everything is tightened.
For model number FFFW5000QW0
Hello Sue, Thank you for the question. This could indicate the Door Hinge with Bushings is worm or damaged and needs to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
William
December 21, 2019
Will not do anything but beep. Turned off at breaker for over 10 minutes, turned the breaker back on and had the same beeping. Everything else looks good.
For model number ltf2140fs2
Hello William and thanks for writing.
It sounds like a malfunctioning board PS12724037, check it for signs of shorts and replace it if damaged. We hope this helps. Please contact us anytime.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Brad
September 14, 2023
Does not spin. Drains and door locks, belt is good. No noise from motor.
For model number Kenmore 41748102701
Hi Brad, thank you for the question. Make sure your drain filter, drain hose, and drain pump are not clogged. If this does not help, we would recommend replacing the motor control board, part number PS1524621. We hope this helps, good luck with this repair!
I am having to repair the door strike because the door hinges are allowing the door to sag. ? Repair!
Hello James, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
