The agitator coupler connects the agitator to the agitator shaft. Common symptoms of a damaged coupler include: a grinding sound during the wash cycle, the washer refusing to agitate or spin, or the washing machine shakes and moves during the wash cycle. Unplug the washer and pull the agitator straight up. Remove the bolt that holds the coupler onto the shaft of the transmission and pull the coupler off. Be sure to clean any dirt, rust, or residue off the transmission spline grooves, and make sure the grooves on the agitator splines are clean and undamaged. We recommend using the gasket and bolt that come with the replacement coupling.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Washer Agitator Coupling Kit
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mario G - April 16, 2023
Verified Purchase
Perfect fit
Part was a match for the original design. Machine fixed! Thanks
★★★★★
★★★★★
Lynn G - January 30, 2023
Verified Purchase
Easy Repair!
Watched the video (thank you!) very easy to replace. My washer was running you could hear the motor, but the agitator was not spinning and totally loose. My agitator literally pulled off to expose this part below. It’s an older GE model.
★★★★★
★★★★★
Kristol M - December 19, 2022
Verified Purchase
So great! Works perfect now!
Every part and piece that ive purchased from this site has been perfect.
★★★★★
★★★★★
Mary P - May 16, 2022
Verified Purchase
Great price; great product!
I am very thankful that PartSelect has the Agitator Coupling Kit! This is the second time I have replaced it and it works like a charm! Thank you for always having this part in stock!
★★★★★
★★★★★
Roderick B - November 17, 2021
Verified Purchase
Arrived in good shape
Washer now operational
★★★★★
★★★★★
Jacob C L - May 11, 2021
Verified Purchase
Fast and easy
The part was exactly what I ordered came Well back very fast delivery my washer was working fine within 20 minutes
★★★★★
★★★★★
Rosemary S - April 7, 2021
Verified Purchase
Easy repair, fast shipping
Part arrived quickly s as ne replacement was fast and easy
★★★★★
★★★★★
Gerald O - April 6, 2021
Verified Purchase
Worked as expected
Part came in 2 days and corrected problem with agitation.
★★★★★
★★★★★
Eric L - July 29, 2020
Verified Purchase
Exact fit
Part was exactly as I had expected. Fit was perfect and helped fix my washer.
★★★★★
★★★★★
Joseph P Greif J - June 10, 2020
Verified Purchase
Agitater drive
Works great fit. Perfectly
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 114 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The agtator wasn't working to clean the clothes.
Got a new part in the Agitator Coupling Kit, as the existing part was worm down. Simply removed and inserted the plastic bottom, used a mallet to pound it down and it was finished. By checking a video, I felt comfortable in doing the repair myself. A greater feelings was knowing I didn't have to go out and buy a new clothes washer. Thanks
... Read more PartSelect for having the right part to complete this project.
Read less
Arthur D from COLUMBIA, MD
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Very loose agitator so I thought
I bought 3 parts for I didn't know what I need so I listen to the companies video twice. I popped off the agitator which was easy. then had a little trouble with getting the screw/nut out it was rusty. Finally got that off then I worked backwards and I found I didn't need all the parts which I sent back with no problems. My machine w
... Read moreorks as good as new ,it has stopped making noise. I am really proud I did this by myself and didn't need my husbands help,
I also spent less than 12.00 to fix and a new one is over 600.00.
Thank You Christine brooks
Read less
christine from EAST PEORIA, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not drain / Agitator noisey
Disconnect electrical cord from outlet . Removed Front panel of cabinet , removed water from tub with my shop vac , disconnected hoses and electrical connections to pump , removed the two 3/8 bolts that secure pump to bottom of cabinet and removed the pump . Replacement of pump was exactly everything in reverse only hoses went on first. A
... Read moregitator only required a small tug which exposed the 7/16 bolt that secures the agitator coupling . A simple remove and replace operation paying attention to the ribs which align to the channels inside the agitator . A small push locks it into place . Finish with replacement of front panel of cabinet.
I was going to replace the washer. .. I am a cabinet maker and pretty good at what I do. I have to admit before seeing the video I was out of my comfort zone with this repair. I was shown not only the part needed and that you folks had the part in your inventory on hand. I was pleased to see how inexpensive it was $7.40. I had it shipped
... Read morefor $8.70. I ordered online at 2 pm. the part arrived the next day at 1 pm. AMAZING!. I spent ten minutes making the repair. The machine is now back to it's like new self! Regards, MichaelAndrews.biz
Read less
Michael from WEST CHESTER, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
CLOTHERS NOT AGITATING
REMOVED THE AGITATOR BY LIFTING STRAIGHT UP WITH MY HANDS. COULDN'T REMOVE THE COUPLING WITH THE NUTDRIVER AT FIRST, DUE TO RUST. SPRAYED A LITTLE WD40. LET IT SET FOR FIVE MINUTES AND REMOVED THE SCREW VERY EASY WITH THE PLIERS. TOOK OUT THE OLD COUPLING AND REPLACED IT WITH THE NEW ONE. THANKS FOR THE YOU-TUBE INFO.
Beulah from MISSOURI CITY, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator not agitating
Watch the videos you might be a little skeptical at first. I watched the videos about 8-10 times before I bought the part so I took my part out first then got back on you tube watched a few more videos and got on parts select website found the part matched it up to what I pulled out of my washer ordered it got to me in a weeks time put it
... Read more in and working like new again cost about 14.00 shipping and part together saved about 200.00 per my estimate I had to fix it.
Read less
Brian from INDIANAPOLIS, IN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator spins freely.
Pull off the agitator. Remove 1 bolt on coupler pull off coupler. Slide new coupler onto spindle. Replace bolt. Line up and slide on agitator. Seat it firmly in place. Done. Took all of 2 minutes.
michael from WORCESTER, MA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would fill, spin and drain, but was not agitating the clothes.
(As I am an older female, I used YouTube to review the repair before trying it. YouTube scared me, the actual repair was much easier) I removed the agitator from the washer which revealed the agitator assembly held in place by a bolt. After removing the bolt, the assembly was lifted off the spindle. I cleaned the grime off the agitator, t
... Read morehe spindle and the bottom of the washer basket. New agitator assembly was placed onto the spindle and pushed down. There was a distinctive click when it slid into place. I replaced the bolt to the top of the assembly. tightened it down, then slid the agitator over the assembly, matching grooves to teeth until that also slid into place with a click. It honestly took me longer to clean the grime than to change the part. Agitator is working perfectly
Read less
Jean from TRAVERSE CITY, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Machine would not agitate.
Remove agitator. Remove coupling. Reinstall new coupling. Reinstall agitator. My only problem was the 7 day delay in getting the part. I expected 2-day delivery.
Butch from WATER VALLEY, MS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator slipping off agitator coupling during operation
Pulled agitator off existing agitator coupling. Removed and replaced agitator coupling. Snapped agitator on. One of the easiest appliance repairs I have ever attempted.
Ask our experts a question about this part and we'll get back to you as soon as possible!
31 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Walter
September 9, 2017
I have pulled up on the agitator but it will not com off? Is the agitator 2 pieces ? I took the softener cap off . I can hold the bottom of the agitator and rotate the top clockwise and counter clockwise. But still cannot pull the agitator off. Any suggestions.
For model number GTWN3000M2WS
Hi Walter,
Thank you for your inquiry. The agitator comes in one piece. There is video on our website about the agitator that you may reference. You will find it on our website under part number PS11736866. I hope this helps. Thank you and have a great day!
Washer will do everything but agitate, help, can i fix it?
For model number WBSR3140DAWW
Hi Margaret,
Thank you for your question. Yes you should be able to fix it. I would suggest looking at this part, your agitator coupling to see if it has worn down. If that part is fine, then you may have to look into replacing your entire agitator. Good luck with your repair.
7 people found this helpful.
Was this helpful?
Thank you for voting!
TJ
May 10, 2019
Agitates normally and pumps water out, but will not spin. Motor does not turn on to spin even though all the water pumps out. Tested continuity of water level switch and the no contact closed and the nc contact opened.
For model number WJSR2070B2WW
Hello TJ, thank you for inquiring. For this symptom you will want to replace either the V-Style Drive Belt part PS270803, the Agitator Coupling Kit part PS1517844, or the Drain Pump and Motor Assembly part PS8768445. We hope this helps.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Earl
April 30, 2018
Not agitating, pulled the top off the agitator, does not have a bolt to take off, has 4 little things
For model number s2100e1ww
Hi Earl,
Thank you for your question. If the washer is not agitating, There are some parts that you will need to check to see which ones are causing the issue. You will need to check the agitator coupling kit, the drive belt, the agitator, the inner tub base hub and the hub nut. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
BRAD Hatten
February 10, 2018
Agitator coupling kit not assessable as per video. Removed agitator cap but there is no opening to get to mounting bolt. Solid plastic 4" down with no opening to mounting bolt. 2 drain holes at solid plastic 4" down. Hotpoint ser# dh920861h washer agitates, drains but does not spin. 1 broken damping strap will need to be replaced also!
For model number VVSR1070D5
Hello Brad, Thank you for your inquiry. You have to pull the entire agitator off to get at the bolt that holds the coupling on. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Carroll
March 18, 2018
Why does agitater keep coming off
For model number WDSR2080D0WW
Hello Carroll, Thank you for your inquiry. It could be an issue with the agitator coupling, or one of the tabs on the bottom of the agitator that holds it to the coupling could be broken off. Check the agitator first and if one of the tabs is broken, then you would need to replace the agitator. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
LANC
January 24, 2020
Your site states that wh49x10042 will replace 175d2846p001 but another site says it won't which is correct? Q&a from other site is below and they were selling the same part.
For model number hotpoint
Hi Lanc. This part as showing as the replacement for 175d2846p001 and we get this information from the manufacturer directly. I would double check for the correct part based on your model number just to be sure. Thank you for your question and good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Migdalia
February 20, 2019
Does it come with the coupling and the screw?
Hello Migdalia, Thank you for your question. Yes, this includes the coupling as well as the bolt. Have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Kristen
November 27, 2018
My washer sounds like it wants to agitate but won't agigate
For model number WJSR2080V2WW
Hello Kristen, Thank you for the question. I suggest removing the Agitator and checking the Agitator Coupling Kit, PartSelect Number PS1517844. The agitator coupler connects the agitator to the agitator shaft. Common symptoms of a damaged coupler include: a grinding sound during the wash cycle, the washer refusing to agitate or spin, or the washing machine shakes and moves during the wash cycle. Unplug the washer and pull the agitator straight up. Remove the bolt that holds the coupler onto the shaft of the transmission and pull the coupler off. Be sure to clean any dirt, rust, or residue off the transmission spline grooves, and make sure the grooves on the agitator splines are clean and undamaged. We recommend using the gasket and bolt that come with the replacement coupling. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Steve
January 3, 2019
The agitator doesn't agitate. The top agitator spins one direction, and locks in the other direction, which is the correct action.The lower agitator spins freely by hand. I have pulled the coupler. It also spins freely by hand. The drive shaft doesn't spin by hand, but the splines on the coupler seem to be intact. Should I go ahead and replace the coupler? thanks.
For model number WCSR4170DAWW
Hello Steve, Thank you for the question. I would suggest replacing the coupler but also checking the Hub Nut, Part Number: PS271505, Tub Bearing Washer Part Number: PS271509, Part Number: PS1766022, Split Ring, Part Number: PS1766022 and the Tub Seal, Part Number: PS4704237. Hope this helps, good luck with this repair!
