Part Location Diagram of W10120998 Whirlpool Lint Filter
See part 42 in the diagram
Replacing your Kenmore Dryer Lint Filter
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Lint Filter W10120998

 Fits your 3RAED3005TQ0!
★★★★★
★★★★★
105 Reviews

Rated by 21 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 61.41
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 3RAED3005TQ0!
PartSelect Number PS1491676
Manufacturer Part Number W10120998
Manufactured by Whirlpool for Kenmore, Whirlpool, Maytag, KitchenAid
Product Description

Lint Filter Specifications

The filter collects lint during the drying cycle. This filter is 12 1/2 inches wide and 10 1/2 inches deep. Replacing the lint filter is an easy repair which requires no tools. When replacing the lint filter, check the filter slot for a buildup of lint, which can be a fire hazard. Continue to check often to make sure the filter and slot are both cleared of lint.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Kenmore Dryer Lint Filter

Replacing your Kenmore Dryer Lint Filter
Troubleshooting
This part fixes the following symptoms:
Marks left on clothes | Door won’t close
This part works with the following products:
Dryer, Washer Dryer Combo.
Part# W10120998 replaces these:
AP3967919, 1206293, W10120998, 3390721, 8066170, 8572268, W10049370, W10120998, W10120998VP, W10178353, W10596627
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
105 Reviews
4.8
Filter By Rating:
  • 5 Stars
    92
  • 4 Stars
    10
  • 3 Stars
    1
  • 2 Stars
    2
  • 1 Star
    0
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.7 / 5.0, 21 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Lint has been bypassing the lint filter and building up in the fan (and duct)
I noticed that drying time was increasing. I took the covers off the dryer to reach the fan and discovered that the squirrel cage fan buckets were packed with lint, and therefore not moving the air as intended. This was because the original lint filter caught most of the lint, but some bypassed the lint filter and then built up in the fan wheel buckets. The lint bypassed the lint filter because there was no felt gasket on the original filter as far as I can tell. I replaced the lint filter...and the replacement filter includes the felt seal (and fits tightly in the slide). The original lint filter has a provision for the felt seal, but I don't recall ever seeing it (and I did not see remnants of it in the fan or duct). As a matter of fact, I was always suspicious of how loosely the lint filter fit in the slide. The felt seal is not available as a replacement part from Maytag. That said, felt material 3/16"x1/2"x10ft is available from McMaster-Carr...and it fits nicely in the original lint filter.
  • David from PINETOWN, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A hole in filter
Remove old filter
Vacuum out
Install new filter
  • Russ from Vernal, UT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Screen ripped
Dropped new filter in.
  • Cindy from BENZONIA, MI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer stopped heating
We have a very early model of the He3. We had to follow directions for the He2 model to replace the heater element and thermostat. Access is easy through the front panel, but removing and replacing the element required some force and maneuvering in a small area.

We replaced both the element and the thermostat since we had the entire part disconnected and removed. So far working great!
Other Parts Used:
High Limit Thermostat Dryer Heater Element Lint Filter
  • Linda from DANVILLE, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Torn filter seal
Remove old filter, throw it away, replace with new filter.
  • James from SCOTTSDALE, AZ
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lint screen was not catching lint and sending out the dryer vent
replaced dryer lint screen with new.
  • Scott from WOODBURY, MN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace lint filter
Just insert filter.
  • Jack from S GLASTONBURY, CT
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint screen tore and had a side that was loose so it didn't catch all the lint and cut your fingers
Removed the old screen and simply put in the new one
  • Wayne from ALBANY, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Very satisfied with the lint filter and with fast shipping, thank you!
Easy manually
  • Fabiola from CANYON CNTRY, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint passing old screen.
Exchanged old for new.
  • Melvin from OXNARD, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

32 questions answered by our experts.
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sean
July 20, 2017
The felt on my lint filter came off so I looked up the replacement part and it looks like it doesn’t have felt on it anymore (I’m assuming it was redesigned?) with that said do I need to get a new filter to replace my current one or can I keep using it since the new one wouldn’t have felt anyways!
PartSelect logo
Hi Sean, using the lint filter you already have should be fine since the redesigned lint filter no longer has felt on it. If you would still like to replace it, you can order part number WP37001142. Please let us know if you have any further questions!

65 people found this helpful.

Was this helpful?
Thank you for voting!
Ellen
July 20, 2017
Using your site I found this part for my dryer but it looks so much different then the one I’m replacing. Has there been redesigned by the manu or something
PartSelect logo
Hi Ellen, yes, this lint filter should fit your model. It does look different than the original because it was recently redesigned by the manufacturer. Best of luck with this repair!

13 people found this helpful.

Was this helpful?
Thank you for voting!
Cheryl
June 10, 2019
Does this replace a lint filter with the part # w10049360
For model number wed5600x
PartSelect logo
Hello Cheryl, thank you for writing. This is the replacement Lint Filter for your model.

11 people found this helpful.

Was this helpful?
Thank you for voting!
Janice
March 8, 2018
What is the part that the lint filter slides into?
For model number WED8200YW1
PartSelect logo
Hi Janice, Thank you for your question. The part that the lint filter slides into is the lint duct. The part number listed under your model number for the lint duct is PS11746341. I hope this helps. Thank you and have a great day!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Barbara
July 20, 2017
pulled my lint filter out of my dryer and it started falling off the screen and I want to fix it or replace it how do I fix it
PartSelect logo
Hello Barbara, if you would like to glue the felt back onto the lint screen, make sure to use a high-temperature adhesive. If that does not work, you can replace the lint screen assembly here W10120998.

6 people found this helpful.

Was this helpful?
Thank you for voting!
Gary
January 8, 2018
Felt around the lint filter is half off. I will try to reglue it. If it does not work, what problems will it cause if i take that half off or remove the entire thing. The new filters do not have them on the new dryers.
For model number WED9050XW0
PartSelect logo
Hello Gary, Thank you for your inquiry. It prevents air from leaking around the filter housing. If your seal is broken, damaged, or overused, it can allow lint to bypass the lint filter. The seal is sold separately, part WP697813. Hope this helps!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Janice
June 19, 2019
The description of the lint filter (part #: Ps1491676) says it's 12 1/2 inches wide and 10 1/2 inches deep. The one i have that came with the dryer is 12 inches wide at its widest point and 10 3/8 inches deep at its deepest point, excluding the protrusion of the handle. Will this part fit my dryer?Also, i'm replacing this filter because the felt is quite old and appears to be letting lint escape around the edges. i understand that the replacement filter does not have the felt surrounding. would this replacement filter be the appropriate part to fix my problem?
For model number 110.66942501
PartSelect logo
Hi Janice, thank you for your question. This filter is the one that your manufacturer lists as the correct part for your model. So it would be the only filter available for your model and should work without any issues. That is correct, the filter no longer has the felt seal around it. The lint filter should stop most of the lint from getting through. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Evelyn Hayes
April 28, 2018
My lint filter is breaking and letting lint into my dryer. What is the correct on to order?
For model number 110.87727701
PartSelect logo
Hi Evelyn, Thank you for your question. The part number listed under your model number for the lint filter is PS1491676. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Missi
May 7, 2018
I am looking to replace my vent filter but it doesn’t look the same as this one. Also it’s in great shape. Is it ok to use this one as the only thing wrong is the felt at the bottom is torn a little. And these new ones do not look to have felt on them? Thoughts?
For model number WED9400SW2
PartSelect logo
Hi Missi, Thank you for the question. You can operate the dryer without the felt strip. The felt seal has been eliminated from the newly redesigned replacement filter. This filter may look different but will still work on your appliance. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Linda
February 25, 2019
My vent cleaner is only collecting on one side the rest is going into my dyers housing.
For model number WED9550WW2
PartSelect logo
Hi Linda, thank you for your question. You may want to then check that your lint filter is in working order. You may also want to check that all of your ducts inside of your appliance and leading to the exhaust on the outside of your home are not clogged with lint. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1491676
Manufacturer Part Number: W10120998
Brand
Model Number
Description
Kenmore
11060052990
Dryer
Kenmore
11060052991
Dryer
Kenmore
11060056990
Dryer
Kenmore
11060056991
Dryer
Kenmore
1106007299
Dryer - Kenmore Dryer Model 110.6007299 (1106007299, 110 6007299) Parts
Kenmore
11060072990
Dryer
Kenmore
11060072991
Dryer
Kenmore
11060092990
Dryer
Kenmore
11060092991
Dryer
Kenmore
11060094990
Dryer
Kenmore
11060094991
Dryer
Kenmore
11060096990
Dryer
Kenmore
11060096991
Dryer
Kenmore
11060097990
Dryer
Kenmore
11060372710
Dryer - Dryer
Kenmore
1106090199
Dryer - Kenmore Dryer Model 110.6090199 (1106090199, 110 6090199) Parts
Kenmore
11060901990
Dryer
Kenmore
1106090299
Dryer - Kenmore Dryer Model 110.6090299 (1106090299, 110 6090299) Parts
Kenmore
11060902990
Dryer
Kenmore
11060904990
Dryer
Kenmore
1106090799
Dryer - Kenmore Dryer Model 110.6090799 (1106090799, 110 6090799) Parts
Kenmore
11060907990
Dryer
Kenmore
11060912990
Dryer
Kenmore
1106092299
Dryer - Kenmore Dryer Model 110.6092299 (1106092299, 110 6092299) Parts
Kenmore
11060922990
Dryer
Kenmore
11060924990
Dryer
Kenmore
1106092799
Dryer - Kenmore Dryer Model 110.6092799 (1106092799, 110 6092799) Parts
Kenmore
11060927990
Dryer
Kenmore
1106093299
Dryer - Kenmore Dryer Model 110.6093299 (1106093299, 110 6093299) Parts
Kenmore
11060932990
Dryer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service